Publications
2013
Ultrafast laser parallel microprocessing using high uniformity binary Dammann grating generated beam array
Kuang, Z., Perrie, W., Liu, D., Edwardson, S. P., Jiang, Y., Fearon, E., . . . Dearden, G. (2013). Ultrafast laser parallel microprocessing using high uniformity binary Dammann grating generated beam array. APPLIED SURFACE SCIENCE, 273, 101-106. doi:10.1016/j.apsusc.2013.01.195
Laser assisted direct write process with novel beam profiles
Shang, S., Wellburn, D., Fearon, E., Yan, S., Edwardson, S., Dearden, G., & Watkins, K. G. (2013). Laser assisted direct write process with novel beam profiles. OPTICS AND LASERS IN ENGINEERING, 51(5), 527-532. doi:10.1016/j.optlaseng.2012.11.005
A review of ultrafast laser materials micromachining
Cheng, J., Liu, C. -S., Shang, S., Liu, D., Perrie, W., Dearden, G., & Watkins, K. (2013). A review of ultrafast laser materials micromachining. Optics & Laser Technology, 46, 88-102. doi:10.1016/j.optlastec.2012.06.037
Ultrafast laser surface wettability modif ication on alumina surface
Yiyu Shen, Y. S., Dun Liu, D. L., Wei Zhang, W. Z., Geof f Dearden, G. F. D., & Ken Watkins, K. W. (2013). Ultrafast laser surface wettability modif ication on alumina surface. Chinese Optics Letters, 11(2), 021403-21405. doi:10.3788/col201311.021403
532nm Wavelength Curing in the Laser Assisted Direct Write (LA-DW) of particulate silver inks
Fearon, E., Fu, L., Edwardson, S. P., Watkins, K. G., & Dearden, G. (2013). 532nm Wavelength Curing in the Laser Assisted Direct Write (LA-DW) of particulate silver inks. In ILAS 2013 (pp. 10). Nottingham: Association of Laser Users.
Laser Forming of ERW steel square tubes within metallurgical constraints
Sheikholeslami, G., Griffiths, J., Edwardson, S. P., Watkins, K. G., & Dearden, G. (2013). Laser Forming of ERW steel square tubes within metallurgical constraints. In 15th International Conference on Sheet Metal (SheMet13) (pp. 10pp). Belfast: Chair of Manufacturing Technology.
Laser Forming of ERW steel square tubes within metallurgical constraints
Sheikholeslami, G., Griffiths, J., Edwardson, S. P., Watkins, K., & Dearden, G. (2013). Laser Forming of ERW steel square tubes within metallurgical constraints. SHEET METAL 2013, 549, 68-+. doi:10.4028/www.scientific.net/KEM.549.68
Ultrafast laser internal structuring of materials with a spatial light modulator
Liu, D., Perrie, W., Edwardson, S. P., Watkins, K. G., & Dearden, G. (2013). Ultrafast laser internal structuring of materials with a spatial light modulator. In ILAS 2013 (pp. 10). Nottingham: Association of Laser Users.
2012
Laser microprocessing of steel with radially and azimuthally polarized femtosecond vortex pulses
Allegre, O. J., Perrie, W., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2012). Laser microprocessing of steel with radially and azimuthally polarized femtosecond vortex pulses. JOURNAL OF OPTICS, 14(8). doi:10.1088/2040-8978/14/8/085601
Thermal laser micro-adjustment using picosecond pulse durations
Griffiths, J., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2012). Thermal laser micro-adjustment using picosecond pulse durations. APPLIED SURFACE SCIENCE, 258(19), 7639-7643. doi:10.1016/j.apsusc.2012.04.109
Ultrashort pulse laser patterning of indium tin oxide thin films on glass by uniform diffractive beam patterns
Kuang, Z., Perrie, W., Liu, D., Fitzsimons, P., Edwardson, S. P., Fearon, E., . . . Watkins, K. G. (2012). Ultrashort pulse laser patterning of indium tin oxide thin films on glass by uniform diffractive beam patterns. APPLIED SURFACE SCIENCE, 258(19), 7601-7606. doi:10.1016/j.apsusc.2012.04.099
Ultrashort Pulse Periodic Structuring of Metallic Surfaces
Mellor, L. F., Edwardson, S. P., Perrie, W., Dearden, G., & Watkins, K. G. (2012). Ultrashort Pulse Periodic Structuring of Metallic Surfaces. LASERS IN ENGINEERING, 23(3-4), 135-150. Retrieved from https://www.webofscience.com/
Multi-beam second-harmonic generation in beta barium borate with a spatial light modulator and application to internal structuring in poly(methyl methacrylate)
Liu, D., Perrie, W., Kuang, Z., Scully, P. J., Baum, A., Liang, S., . . . Watkins, K. G. (2012). Multi-beam second-harmonic generation in beta barium borate with a spatial light modulator and application to internal structuring in poly(methyl methacrylate). APPLIED PHYSICS B-LASERS AND OPTICS, 107(3), 795-801. doi:10.1007/s00340-012-5068-8
Real-time control of polarisation in ultra-short-pulse laser micro-machining
Allegre, O. J., Perrie, W., Bauchert, K., Liu, D., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2012). Real-time control of polarisation in ultra-short-pulse laser micro-machining. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 107(2), 445-454. doi:10.1007/s00339-012-6761-5
Polymer-nanoparticle composites composed of PEDOT:PSS and nanoparticles of Ag synthesised by laser ablation
Semaltianos, N. G., Perrie, W., Romani, S., Potter, R. J., Dearden, G., & Watkins, K. G. (2012). Polymer-nanoparticle composites composed of PEDOT:PSS and nanoparticles of Ag synthesised by laser ablation. COLLOID AND POLYMER SCIENCE, 290(3), 213-220. doi:10.1007/s00396-011-2533-6
A Thermal Investigation on Silver Ink Tracks Cured on Flexible Substrates by Repeating Irradiations of Nd:YAG laser at 532nm
Fu, L., Shang, S., Fearon, E., Perrie, W., Edwardson, S. P., Watkins, K. G., & Dearden, G. (2012). A Thermal Investigation on Silver Ink Tracks Cured on Flexible Substrates by Repeating Irradiations of Nd:YAG laser at 532nm. In ICALEO 2012 (pp. 10 (P161)). Miami: Laser Institute of America.
Advances in Ultra Short Pulsed Parallel Processing Using a Spatial Light Modulator
Edwardson, S. P., Kuang, Z., Liu, D., Perrie, W., Watkins, K. G., & Dearden, G. (2012). Advances in Ultra Short Pulsed Parallel Processing Using a Spatial Light Modulator. In ICALEO 2012 (pp. 10 (M308)). Miami: Laser Institute of America.
Advances in ultra short pulse laser based parallel processing using a spatial light modulator
Dearden, G., Kuang, Z., Liu, D., Perrie, W., Edwardson, S. P., & Watkins, K. G. (2012). Advances in ultra short pulse laser based parallel processing using a spatial light modulator. LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012), 39, 650-660. doi:10.1016/j.phpro.2012.10.085
Multiple Beam Internal Structuring of Poly(methyl methacrylate)
Liu, D., Perrie, W., Kuang, Z., Scully, P. J., Baum, A., Liang, S., . . . Watkins, K. G. (2012). Multiple Beam Internal Structuring of Poly(methyl methacrylate). JOURNAL OF LASER MICRO NANOENGINEERING, 7(2), 208-211. doi:10.2961/jlmn.2012.02.0014
Multiple NUV femtosecond laser beam direct writing of volume Bragg gratings
Liu, D., Kuang, Z., Perrie, W., Dearden, G., Edwardson, S. P., & Watkins, K. G. (2012). Multiple NUV femtosecond laser beam direct writing of volume Bragg gratings. In IoP Photon12 Conference (pp. 10pp). Durham: Institute of Physics.
Picosecond Laser Beam Shaping Using a Spatial Light Modulator
Liu, D., Perrie, W., Mellor, L., Kuang, Z., Fearon, E., Edwardson, S. P., . . . Dearden, G. (2012). Picosecond Laser Beam Shaping Using a Spatial Light Modulator. In ICALEO 2012 (pp. 10 (M303)). Miami: Laser Institute of America.
2011
A predictive thermal dynamic model for parameter generation in the laser assisted direct write process
Shang, S., Fearon, E., Wellburn, D., Sato, T., Edwardson, S., Dearden, G., & Watkins, K. G. (2011). A predictive thermal dynamic model for parameter generation in the laser assisted direct write process. Journal of Physics D: Applied Physics, 44(43), 435301. doi:10.1088/0022-3727/44/43/435301
Picosecond laser patterning of PEDOT:PSS thin films
Semaltianos, N. G., Koidis, C., Pitsalidis, C., Karagiannidis, P., Logothetidis, S., Perrie, W., . . . Watkins, K. G. (2011). Picosecond laser patterning of PEDOT:PSS thin films. SYNTHETIC METALS, 161(5-6), 431-439. doi:10.1016/j.synthmet.2010.12.022
Modeling of Real Temporally Variant Beam Shapes in Laser Materials Processing
Griffiths, J., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2011). Modeling of Real Temporally Variant Beam Shapes in Laser Materials Processing. In 30th International Congress on Applications of Lasers and Electro-Optics (pp. M701 (10 pages)). Orlando, FL: Laser Institute of America.
Short Pulse Thermal Laser Micro-adjustment Technique
Griffiths, J., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2011). Short Pulse Thermal Laser Micro-adjustment Technique. In 3rd International Workshop on Thermal Forming and Welding Distortion (IWOTE'11) (pp. 10). Bremen: BIAS Verlag.
The effect of graphite burn off on multi pass laser forming
Griffiths, J., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2011). The effect of graphite burn off on multi pass laser forming. In 3rd International Workshop on Thermal Forming and Welding Distortion (IWOTE'11) (pp. 10). Bremen: BIAS Verlag.
Ultra-short Pulse Laser Micro-machining of Metals with Radial and Azimuthal Polarization
Allegre, O. J., Perrie, W., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2011). Ultra-short Pulse Laser Micro-machining of Metals with Radial and Azimuthal Polarization. In 30th International Congress on Applications of Lasers and Electro-Optics (pp. (M601); 10pp). Orlando, FL: Laser Institute of America.
Ultrafast laser parallel processing of materials
Perrie, W., Edwardson, S. P., Liu, D., Dearden, G., Fearon, E., Watkins, K. G., . . . Kearsley, A. (2011). Ultrafast laser parallel processing of materials. In 1st Biannual Industrial Laser Applications Symposium (ILAS 2011) (pp. 10pp). Cheshire: Association of Laser Users (AILU).
2010
High-speed uniform parallel 3D refractive index micro-structuring of poly(methyl methacrylate) for volume phase gratings
Liu, D., Kuang, Z., Perrie, W., Scully, P. J., Baum, A., Edwardson, S. P., . . . Watkins, K. G. (2010). High-speed uniform parallel 3D refractive index micro-structuring of poly(methyl methacrylate) for volume phase gratings. APPLIED PHYSICS B-LASERS AND OPTICS, 101(4), 817-823. doi:10.1007/s00340-010-4205-5
Laser ablation in water: A route to synthesize nanoparticles of titanium monoxide
Semaltianos, N. G., Logothetidis, S., Frangis, N., Tsiaoussis, I., Perrie, W., Dearden, G., & Watkins, K. G. (2010). Laser ablation in water: A route to synthesize nanoparticles of titanium monoxide. Chemical Physics Letters, 496(1-3), 113-116. doi:10.1016/j.cplett.2010.07.023
Femtosecond laser internal structuring of materials using a spatial light modulator
Liu, D., Kuang, Z., Perrie, W., Scully, P. J., Baum, A., Liang, S., . . . Watkins, K. G. (2010). Femtosecond laser internal structuring of materials using a spatial light modulator. In 4th Pacific International Conference on Applications of Lasers and Optics, PICALO 2010.
Laser forming: overview of the controlling factors in the temperature gradient mechanism
Edwardson, S. P., Griffiths, J., Edwards, K. R., Dearden, G., & Watkins, K. G. (2010). Laser forming: overview of the controlling factors in the temperature gradient mechanism. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 224(C5), 1031-1040. doi:10.1243/09544062JMES1776
Laser-assisted Direct Write for aerospace applications
Sato, T., Fearon, E., Curran, C., Watkins, K. G., Dearden, G., & Eckford, D. (2010). Laser-assisted Direct Write for aerospace applications. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 224(4), 519-526. doi:10.1243/09544100jaero572
The opportunities and challenges associated with wireless interconnects in aircraft
Panitz, M., Hope, D. C., Sato, T., Harley, C. D., Christopoulos, C., Sewell, P., . . . Crowther, W. J. (2010). The opportunities and challenges associated with wireless interconnects in aircraft. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 224(4), 459-470. doi:10.1243/09544100jaero566
Laser micro peen forming without a tamping layer
Edwards, K. R., Edwardson, S. P., Carey, C., Dearden, G., & Watkins, K. G. (2010). Laser micro peen forming without a tamping layer. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 47(1-4), 191-200. doi:10.1007/s00170-009-2185-6
Towards a rapid, non-contact shaping method for fibre metal laminates using a laser source
Carey, C., Cantwell, W. J., Dearden, G., Edwards, K. R., Edwardson, S. P., & Watkins, K. G. (2010). Towards a rapid, non-contact shaping method for fibre metal laminates using a laser source. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 47(5-8), 557-565. doi:10.1007/s00170-009-2229-y
Picosecond laser ablation of nickel-based superalloy C263
Semaltianos, N. G., Perrie, W., Cheng, J., French, P., Sharp, M., Dearden, G., & Watkins, K. G. (2010). Picosecond laser ablation of nickel-based superalloy C263. Applied Physics A, 98(2), 345-355. doi:10.1007/s00339-009-5399-4
Modification of the electrical properties of PEDOT:PSS by the incorporation of ZnO nanoparticles synthesized by laser ablation
Semaltianos, N. G., Logothetidis, S., Hastas, N., Perrie, W., Romani, S., Potter, R. J., . . . Sharp, M. (2010). Modification of the electrical properties of PEDOT:PSS by the incorporation of ZnO nanoparticles synthesized by laser ablation. CHEMICAL PHYSICS LETTERS, 484(4-6), 283-289. doi:10.1016/j.cplett.2009.11.054
Embedding arrays of microspheres with optical trapping for micro scale device manufacture
Croft, J., Edwardson, S. P., Williams, C. J., Allegre, O. J., Dearden, G., & Watkins, K. G. (2010). Embedding arrays of microspheres with optical trapping for micro scale device manufacture. In International Congress on Applications of Lasers & Electro-Optics (pp. 1450). Laser Institute of America. doi:10.2351/1.5062000
Fast parallel diffractive multi-beam laser surface micro-structuring
Kuang, Z., Liu, D., Perrie, W., Cheng, J., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2010). Fast parallel diffractive multi-beam laser surface micro-structuring. In PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE (pp. 469-472). doi:10.1007/978-1-84996-432-6_104
Finite Element Modelling of the Laser Forming of AISI 1010 Steel
Griffiths, J., Edwardson, S. P., Dearden, G., & Watkins, K. W. (2010). Finite Element Modelling of the Laser Forming of AISI 1010 Steel. In 36th International MATADOR Conference (pp. 503-508). Manchester, UK: CIRP (UK) Ltd.
Finite Element Modelling of the Laser Forming of AISI 1010 Steel
Griffiths, J., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2010). Finite Element Modelling of the Laser Forming of AISI 1010 Steel. PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 503-507. doi:10.1007/978-1-84996-432-6_111
Finite element modelling of laser forming at macro and micro scales
Griffiths, J., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2010). Finite element modelling of laser forming at macro and micro scales. In 6th International Conference on Laser Assisted Net shape Engineering (LANE) (pp. 10). Erlangen, Germany: Physics Procedia (Elsevier).
Multiple beam refractive index modification of PMMA
Liu, D., Perrie, W., Kuang, Z., Scully, P., Liang, S., Baum, A., . . . Watkins, K. G. (2010). Multiple beam refractive index modification of PMMA. In IoP Photon10 Conference (pp. 10pp). Southampton: Institute of Physics.
Multiple beam ultrashort pulse laser microprocessing (Invited paper)
Kuang, Z., Liu, D., Perrie, W., Cheng, J., Shang, S., Edwardson, S. P., . . . Watkins, K. G. (2010). Multiple beam ultrashort pulse laser microprocessing (Invited paper). In 4th Pacific International Conference on Applications of Lasers and Optics, PICALO 2010 (pp. 10pp). Wuhan: Laser Institute of America.
Parallel diffractive multi-beam laser surface micro-structuring
Edwardson, S. P., Perrie, W., Kuang, Z., Liu, D., Dearden, G., & Watkins, K. G. (2010). Parallel diffractive multi-beam laser surface micro-structuring. In IoP Photon10 Conference (pp. 10pp). Southampton: Institute of Physics.
Real-time control of polarisation in high-aspect-ratio ultra-short-pulse laser micro-machining
Allegre, O. J., Perrie, W., Bauchert, K., Dearden, G., & Watkins, K. G. (2010). Real-time control of polarisation in high-aspect-ratio ultra-short-pulse laser micro-machining. In International Congress on Applications of Lasers & Electro-Optics (pp. 1426-1433). Laser Institute of America. doi:10.2351/1.5061995
Real-time control of polarization in ultra-short pulse laser micro-processing
Allegre, O., Perrie, W., Bauchert, K., Liu, D., Edwardson, S. P., Dearden, G., & Watkins, K. W. (2010). Real-time control of polarization in ultra-short pulse laser micro-processing. In 36th International MATADOR Conference (pp. 553-558). Manchester, UK: CIRP (UK) Ltd.
Temperature Gradient Mechanism: Overview of the Multiple Pass Controlling Factors
Edwardson, S. P., Griffiths, J., Dearden, G., & Watkins, K. G. (2010). Temperature Gradient Mechanism: Overview of the Multiple Pass Controlling Factors. LASER ASSISTED NET SHAPE ENGINEERING 6, PROCEEDINGS OF THE LANE 2010, PART 1, 5, 53-63. doi:10.1016/j.phpro.2010.08.122
Towards Controlled 3D Laser Forming
Edwardson, S. P., Griffiths, J., Dearden, G., & Watkins, K. W. (2010). Towards Controlled 3D Laser Forming. In 36th International MATADOR Conference (pp. 513-518). Manchester, UK: CIRP (UK) Ltd.
Towards Controlled 3D Laser Forming
Edwardson, S. P., Griffiths, J., Dearden, G., & Watkins, K. G. (2010). Towards Controlled 3D Laser Forming. PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 513-516. doi:10.1007/978-1-84996-432-6_113
Ultrashort pulse periodic surface structuring of metallic surfaces
Mellor, L., Edwardson, S. P., Perrie, W., Dearden, G., & Watkins, K. (2010). Ultrashort pulse periodic surface structuring of metallic surfaces. In International Congress on Applications of Lasers & Electro-Optics (pp. 791-798). Laser Institute of America. doi:10.2351/1.5062117
2009
Effects of laser operating parameters on metals micromachining with ultrafast lasers
Cheng, J., Perrie, W., Edwardson, S. P., Fearon, E., Dearden, G., & Watkins, K. G. (2009). Effects of laser operating parameters on metals micromachining with ultrafast lasers. APPLIED SURFACE SCIENCE, 256(5), 1514-1520. doi:10.1016/j.apsusc.2009.09.013
Diffractive Multi-beam Ultra-fast Laser Micro-processing Using a Spatial Light Modulator(Invited Paper)
Zheng Kuang, Z. K., Dun Liu*, D. L., Walter Perrie, W. P., Jian Cheng, J. C., Shuo Shang, S. S., S. P. Edwardson, S. P. E., . . . K. G. Watkins, K. G. W. (2009). Diffractive Multi-beam Ultra-fast Laser Micro-processing Using a Spatial Light Modulator(Invited Paper). Chinese Journal of Lasers, 36(12), 3093-3115. doi:10.3788/cjl20093612.3093
Diffractive multi-beam surface micro-processing using 10 ps laser pulses
Kuang, Z., Perrie, W., Liu, D., Edwardson, S., Cheng, J., Dearden, G., & Watkins, K. (2009). Diffractive multi-beam surface micro-processing using 10 ps laser pulses. APPLIED SURFACE SCIENCE, 255(22), 9040-9044. doi:10.1016/j.apsusc.2009.06.089
Generation and characterization of NiO nanoparticles by continuous wave fiber laser ablation in liquid
Khan, S. Z., Yuan, Y., Abdolvand, A., Schmidt, M., Crouse, P., Li, L., . . . Watkins, K. G. (2009). Generation and characterization of NiO nanoparticles by continuous wave fiber laser ablation in liquid. Journal of Nanoparticle Research, 11(6), 1421-1427. doi:10.1007/s11051-008-9530-9
CdTe nanoparticles synthesized by laser ablation
Semaltianos, N. G., Logothetidis, S., Perrie, W., Romani, S., Potter, R. J., Sharp, M., . . . Watkins, K. G. (2009). CdTe nanoparticles synthesized by laser ablation. APPLIED PHYSICS LETTERS, 95(3). doi:10.1063/1.3171941
Ablation mechanism study on metallic materials with a 10 ps laser under high fluence
Cheng, J., Perrie, W., Wu, B., Tao, S., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2009). Ablation mechanism study on metallic materials with a 10 ps laser under high fluence. APPLIED SURFACE SCIENCE, 255(18), 8171-8175. doi:10.1016/j.apsusc.2009.05.036
Switching devices in sol–gel hybrid thin film technology
Dima, A., Dima, M., Watkins, K. G., Dearden, G., Liu, D., Williams, C. J., . . . Della Corte, F. G. (2009). Switching devices in sol–gel hybrid thin film technology. Thin Solid Films, 517(16), 4658-4662. doi:10.1016/j.tsf.2009.02.118
Single-pulse drilling study on Au, Al and Ti alloy by using a picosecond laser
Cheng, J., Perrie, W., Sharp, M., Edwardson, S. P., Semaltianos, N. G., Dearden, G., & Watkins, K. G. (2009). Single-pulse drilling study on Au, Al and Ti alloy by using a picosecond laser. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 95(3), 739-746. doi:10.1007/s00339-008-5037-6
A comparative study of optical fibre types for application in a laser-induced ignition system
Mullett, J. D., Dearden, G., Dodd, R., Shenton, A. T., Triantos, G., & Watkins, K. G. (2009). A comparative study of optical fibre types for application in a laser-induced ignition system. Journal of Optics A: Pure and Applied Optics, 11(5), 054007. doi:10.1088/1464-4258/11/5/054007
Fast parallel diffractive multi-beam femtosecond laser surface micro-structuring
Kuang, Z., Liu, D., Perrie, W., Edwardson, S., Sharp, M., Fearon, E., . . . Watkins, K. (2009). Fast parallel diffractive multi-beam femtosecond laser surface micro-structuring. APPLIED SURFACE SCIENCE, 255(13-14), 6582-6588. doi:10.1016/j.apsusc.2009.02.043
Femtosecond laser ablation characteristics of nickel-based superalloy C263
Semaltianos, N. G., Perrie, W., French, P., Sharp, M., Dearden, G., Logothetidis, S., & Watkins, K. G. (2009). Femtosecond laser ablation characteristics of nickel-based superalloy C263. Applied Physics A, 94(4), 999-1009. doi:10.1007/s00339-008-4885-4
II-VI semiconductor nanoparticles synthesized by laser ablation
Semaltianos, N. G., Logothetidis, S., Perrie, W., Romani, S., Potter, R. J., Sharp, M., . . . Watkins, K. G. (2009). II-VI semiconductor nanoparticles synthesized by laser ablation. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 94(3), 641-647. doi:10.1007/s00339-008-4854-y
Nano-Silicon Sol-Gel Film Refraction Index Modulation with Femtosecond Laser
Dima, A., Gagliardi, M., Liu, D., Perrie, W., Williams, C. J., Rendina, I., . . . Watkins, K. G. (2009). Nano-Silicon Sol-Gel Film Refraction Index Modulation with Femtosecond Laser. In Smart Materials for Smart Devices and Structures (Vol. 154, pp. 101-106). Zurich, Switzerland: Trans Tech Publications.
Nano-Silicon Sol-Gel Film Refraction Index Modulation with Femtosecond Laser
Dima, A., Gagliardi, M., Liu, D., Perrie, W., Williams, C. J., Rendina, I., . . . Watkins, K. G. (n.d.). Nano-Silicon Sol-Gel Film Refraction Index Modulation with Femtosecond Laser. Solid State Phenomena, 154, 101-106. doi:10.4028/www.scientific.net/ssp.154.101
Surface plasmon polaritons for micro and nano-texturing of metal surfaces
Mellor, L., Edwardson, S. P., Perrie, W., Dearden, G., & Watkins, K. (2009). Surface plasmon polaritons for micro and nano-texturing of metal surfaces. In International Congress on Applications of Lasers & Electro-Optics (pp. 1329-1337). Laser Institute of America. doi:10.2351/1.5061494
2008
Femtosecond laser surface texturing of a nickel-based superalloy
Semaltianos, N. G., Perrie, W., French, P., Sharp, M., Dearden, G., & Watkins, K. G. (2008). Femtosecond laser surface texturing of a nickel-based superalloy. Applied Surface Science, 255(5), 2796-2802. doi:10.1016/j.apsusc.2008.08.043
High throughput diffractive multi-beam femtosecond laser processing using a spatial light modulator
Kuang, Z., Perrie, W., Leach, J., Sharp, M., Edwardson, S. P., Padgett, M., . . . Watkins, K. G. (2008). High throughput diffractive multi-beam femtosecond laser processing using a spatial light modulator. APPLIED SURFACE SCIENCE, 255(5), 2284-2289. doi:10.1016/j.apsusc.2008.07.091
CdSe nanoparticles synthesized by laser ablation
Semaltianos, N. G., Logothetidis, S., Perrie, W., Romani, S., Potter, R. J., Sharp, M., . . . Watkins, K. G. (2008). CdSe nanoparticles synthesized by laser ablation. EPL, 84(4). doi:10.1209/0295-5075/84/47001
Nanoparticle formation by the debris produced by femtosecond laser ablation of silicon in ambient air
Semaltianos, N. G., Perrie, W., Vishnyakov, V., Murray, R., Williams, C. J., Edwardson, S. P., . . . Watkins, K. G. (2008). Nanoparticle formation by the debris produced by femtosecond laser ablation of silicon in ambient air. MATERIALS LETTERS, 62(14), 2165-2170. doi:10.1016/j.matlet.2007.11.087
The influences of particle number on hot spots in strongly coupled metal nanoparticles chain
Wang, Z. B., Luk'yanchuk, B. S., Guo, W., Edwardson, S. P., Whitehead, D. J., Li, L., . . . Watkins, K. G. (2008). The influences of particle number on hot spots in strongly coupled metal nanoparticles chain. JOURNAL OF CHEMICAL PHYSICS, 128(9). doi:10.1063/1.2835598
Beam Intensity Profile Modulation for Even Surface Treatment: Finite Element Modelling and Optical Design
Wellburn, D., Sharp, M., Steen, W., Dearden, G., Watkins, K. G., & al, E. (2008). Beam Intensity Profile Modulation for Even Surface Treatment: Finite Element Modelling and Optical Design. In P. Baker (Ed.), 27th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2008) (pp. 10p). Tremecula, CA: Laser Institute of America.
Diffractive Multi-Beam Ultra Fast Laser Processing by Using a Spatial Light Modulator
Kuang, Z., Perrie, W., Sharp, M., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2008). Diffractive Multi-Beam Ultra Fast Laser Processing by Using a Spatial Light Modulator. In IoP Photon08 Conference (pp. 10p). Edinburgh: Institute of Physics.
Effect of Post Forming Heat Treatments on Laser Formed Components
Abed, E., Edwardson, S. P., Edwards, K. R., Carey, C., Dearden, G., & Watkins, K. G. (2008). Effect of Post Forming Heat Treatments on Laser Formed Components. In F. Vollertsen, & J. Sakkiettibutra (Eds.), International Workshop on Thermal Forming and Weld Distortion (IWOTE'08) (pp. 315-322). Bremen: BIAS Verlag.
Effects of Material Parameters on the Laser Forming of Fibre Metal Laminates
Carey, C., Cantwell, W. J., Dearden, G., Edwards, K. R., Edwardson, S. P., & Watkins, K. G. (2008). Effects of Material Parameters on the Laser Forming of Fibre Metal Laminates. In International Workshop on Thermal Forming and Weld Distortion (IWOTE'08) (pp. 421-428). Bremen: BIAS Verlag.
Generation of Nickel Oxide Nanoparticles by CW Laser Ablation in Liquid
Khan, S., Yuan, Y., Abdolvand, A., Schmidt, M. J. J., Li, L., Liu, Z., . . . Watkins, K. G. (2008). Generation of Nickel Oxide Nanoparticles by CW Laser Ablation in Liquid. In 3rd Pacific International Conference on Applications of Lasers and Optoelectronics (PICALO08) (pp. 10p). Beijing: Laser Institute of America.
Laser Forming for Ship Building Applications
Edwardson, S. P., Edwards, K., Carey, C., Dearden, G., & Watkins, K. G. (2008). Laser Forming for Ship Building Applications. Steel Tech, 2(4), 42-46. Retrieved from http://www.steeltech-india.com/
Laser Peen Forming for Non-thermal Forming of Sensitive Components
Edwards, K. R., Edwardson, S. P., Carey, C., Williams, C., Dearden, G., & Watkins, K. G. (2008). Laser Peen Forming for Non-thermal Forming of Sensitive Components. In International Workshop on Thermal Forming and Weld Distortion (IWOTE'08) (pp. 403-412). Bremen: BIAS Verlag.
Multi-Cylinder Laser and Spark Ignition in an IC Gasoline Automotive Engine: A Comparative Study
Mullett, J. D., Dickinson, P. B., Shenton, A. T., Dearden, G., & Watkins, K. G. (2008). Multi-Cylinder Laser and Spark Ignition in an IC Gasoline Automotive Engine: A Comparative Study. In SAE World Conference (pp. 1-6). Detroit: SAE.
Multi-Cylinder Laser and Spark Ignition in an IC Gasoline Automotive Engine: A Comparative Study
Mullett, J. D., Dickinson, P., Shenton, A. T., Dearden, G., & Watkins, K. G. (2008). Multi-Cylinder Laser and Spark Ignition in an IC Gasoline Automotive Engine: A Comparative Study. SI Combustion and Direct Injection SI Engine Technology, 2008, SP-218.
Multi-Cylinder Laser and Spark Ignition in an IC Gasoline Automotive Engine: A Comparative Study
Mullett, J. D., Dickinson, P. B., Shenton, A. T., Dearden, G., & Watkins, K. G. (n.d.). Multi-Cylinder Laser and Spark Ignition in an IC Gasoline Automotive Engine: A Comparative Study. SAE International. doi:10.4271/2008-01-0470
Nano-Silicon Sol-Gel Film Refraction Index Modulation with Femtosecond Laser
Dima, A., Gagliardi, M., Liu, D., Perrie, W., Williams, C. J., Rendina, I., . . . Watkins, K. G. (2008). Nano-Silicon Sol-Gel Film Refraction Index Modulation with Femtosecond Laser. In E-MRS Fall Meeting 2008, Symposium C (pp. 10p). Warsaw: European Materials Research Society.
Optical Tweezers Forces Now Measured on Sub Micron and Micron Dielectric Particles
Edwardson, S. P., Croft, J., Perrie, W., Sharp, M., Dearden, G., & Watkins, K. G. (2008). Optical Tweezers Forces Now Measured on Sub Micron and Micron Dielectric Particles. In IoP Photon08 Conference (pp. 10p). Edinburgh: Institute of Physics.
Production of Micro and Nano Scale Features on Polymer Surfaces with SPM Based Lithography and Ultra Short Pulsed Lasers
Williams, C., Edwardson, S. P., Perrie, W., Ansari, I., Sharp, M., Dearden, G., . . . al, E. (2008). Production of Micro and Nano Scale Features on Polymer Surfaces with SPM Based Lithography and Ultra Short Pulsed Lasers. In P. Baker (Ed.), 27th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2008) (pp. 10p). Tremecula, CA: Laser Institute of America.
Silicon nano-particles in SiO2 sol–gel film for nano-crystal memory device applications
Dima, A., Della Corte, F. G., Williams, C. J., Watkins, K. G., Dearden, G., O’Hare, N., . . . Dima, M. (2008). Silicon nano-particles in SiO2 sol–gel film for nano-crystal memory device applications. Microelectronics Journal, 39(5), 768-770. doi:10.1016/j.mejo.2007.12.022
Single Pulse Picosecond Laser Ablation Studies on Metals
Cheng, J., Perrie, W., Edwardson, S., Sharp, M., Dearden, G., & Watkins, K. G. (2008). Single Pulse Picosecond Laser Ablation Studies on Metals. In IoP Photon08 Conference (pp. 10pp). Edinburgh: Institute of Physics.
2007
Control method for 3D laser forming based on geometrical data
Abed, E., Edwardson, S. P., Bartkowiak, K., Dearden, G., & Watkins, K. G. (2007). Control method for 3D laser forming based on geometrical data. In 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings.
Key factors influencing the bend per pass in laser forming
Edwardson, S. P., Abed, E., Carey, C., Edwards, K. R., Bartkowiak, K., Dearden, G., & Watkins, K. G. (2007). Key factors influencing the bend per pass in laser forming. In 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings.
Laser peen forming for 2D shaping and micro adjustment
Edwards, K., Edwardson, S. P., Carey, C., Williams, C. J., Dearden, G., & Watkins, K. G. (2007). Laser peen forming for 2D shaping and micro adjustment. In 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007 - Congress Proceedings.
Laser ignition of an IC test engine using an Nd: YAG laser and the effect of key laser parameters on engine combustion performance
Dodd, R., Mullett, J., Carroll, S., Dearden, G., Shenton, A. T., Watkins, K. G., . . . Keen, S. (2007). Laser ignition of an IC test engine using an Nd: YAG laser and the effect of key laser parameters on engine combustion performance. Lasers in Engineering, 17(3-4), 213-231.
Optical near-field distribution in an asymmetrically illuminated tip–sample system for laser/STM nanopatterning
Wang, Z. B., Luk’yanchuk, B. S., Li, L., Crouse, P. L., Liu, Z., Dearden, G., & Watkins, K. G. (2007). Optical near-field distribution in an asymmetrically illuminated tip–sample system for laser/STM nanopatterning. Applied Physics A, 89(2), 363-368. doi:10.1007/s00339-007-4114-6
The influence of beam energy, mode and focal length on the control of laser ignition in an internal combustion engine
Mullett, J. D., Dodd, R., Williams, C. J., Triantos, G., Dearden, G., Shenton, A. T., . . . Keen, S. (2007). The influence of beam energy, mode and focal length on the control of laser ignition in an internal combustion engine. Journal of Physics D: Applied Physics, 40(15), 4730-4739. doi:10.1088/0022-3727/40/15/056
Effects of laser interaction with graphite coatings
Carey, C., Cantwell, W. J., Dearden, G., Edwards, K., Edwardson, S. P., Mullett, J. D., . . . Watkins, K. G. (2007). Effects of laser interaction with graphite coatings. In Laser Assisted Net Shape Engineering 5 (pp. 673-686). Erlangen: ??.
Factors influencing the bend per pass in multi-pass laser forming
Edwardson, S. P., Abed, E., Carey, C., Edwards, K., Dearden, G., & Watkins, K. G. (2007). Factors influencing the bend per pass in multi-pass laser forming. In Laser Assisted Net Shape Engineering 5 (pp. 557-568). Erlangen: ??.
Geometrical based control method for 3D laser forming
Abed, E., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2007). Geometrical based control method for 3D laser forming. In Laser Assisted Net Shape Engineering 5 (pp. 1043-1052). Erlangen: ??.
Laser peen forming for 2D shaping and adjustment of metallic components
Edwards, K., Carey, C., Edwardson, S. P., Dearden, G., Williams, C. J., & Watkins, K. G. (2007). Laser peen forming for 2D shaping and adjustment of metallic components. In Laser Assisted Net Shape Engineering 5 (pp. 569-580). Erlangen: ??.
Low power laser forming of glass fibre based fibre metal laminates
Carey, C., Cantwell, W. J., Dearden, G., Edwards, K., Edwardson, S. P., & Watkins, K. G. (2007). Low power laser forming of glass fibre based fibre metal laminates. In Laser Assisted Net Shape Engineering 5 (pp. 645-655). Erlangen: ??.
Silicon nanoparticles produced by femtosecond laser ablation
Semaltianos, N. G., Perrie, W., Edwardson, S. P., Dearden, G., Sharp, M., & Watkins, K. G. (2007). Silicon nanoparticles produced by femtosecond laser ablation. In 8th International Symposium on Laser Precision Microfabrication (pp. 0-000). Vienna: JLPS / University of Vienna.
2006
Geometrical influences on multi-pass laser forming
Edwardson, S. P., Abed, E., Bartkowiak, K., Dearden, G., & Watkins, K. G. (2006). Geometrical influences on multi-pass laser forming. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 39(2), 382-389. doi:10.1088/0022-3727/39/2/021
Correction of distortion and design shape in aluminium structures using laser forming
Dearden, G., Edwardson, S. P., Abed, E., Bartkowiak, K., & Watkins, K. G. (2006). Correction of distortion and design shape in aluminium structures using laser forming. In International Congress on Applications of Lasers & Electro-Optics (pp. P505). Laser Institute of America. doi:10.2351/1.5060920
Effects of laser parameters on laser ignition in an internal combustion engine
Mullett, J. D., Dodd, R., Triantos, G., Dearden, G., Shenton, A. T., Watkins, K. G., . . . Keen, S. (2006). Effects of laser parameters on laser ignition in an internal combustion engine. In Photon'06 (pp. 0-000). Manchester: Institute of Physics.
Geometrical technique for closed loop 3-dimensional laser forming
Abed, E., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2006). Geometrical technique for closed loop 3-dimensional laser forming. In Photon'06 (pp. 0-000). Manchester: Institute of Physics.
Investigation Into The Influence Of Pulse Shaping On Drilling Efficiency
French, P. W., Naeem, M., Sharp, M., & Watkins, K. G. (2006). Investigation Into The Influence Of Pulse Shaping On Drilling Efficiency. In Laser Materials Processing (pp. 0-00). Arizona: Laser Institute of America.
Laser forming for the correction of distortion and design shape in aluminium structures (Invited paper)
Dearden, G., Edwardson, S. P., Abed, E., & Watkins, K. G. (2006). Laser forming for the correction of distortion and design shape in aluminium structures (Invited paper). In Photon'06 (pp. 0-000). Manchester: Institute of Physics.
Laser forming looks in good shape
Dearden, G., Edwardson, S. P., Abed, E., & Watkins, K. G. (2006). Laser forming looks in good shape. Industrial Laser Solutions, 16-18.
Laser peen forming of thin sheet ferrous materials
Edwards, K. R., Dearden, G., Watkins, K. G., & Edwardson, S. P. (2006). Laser peen forming of thin sheet ferrous materials. In Photon'06 (pp. 0-000). Manchester: Institute of Physics.
NIR and Uv Femtosecond Laser micro-structuring of Materials
Perrie, W., Baum, A., Scully, P., Sharp, M., Edwardson, S. P., & Watkins, K. G. (2006). NIR and Uv Femtosecond Laser micro-structuring of Materials. In Photon '06 (pp. 0-000). Manchester: Institute of Physics.
Optimum deposition parameters for the direct laser fabrication (DLF) of quasi-hollow structures
Davis, S. J., Watkins, K. G., Dearden, G., Fearon, E., & Zeng, J. (2006). Optimum deposition parameters for the direct laser fabrication (DLF) of quasi-hollow structures. In Photon'06 (pp. 0-000). Manchester: Institute of Physics.
2005
Developments towards controlled three-dimensional laser forming of continuous surfaces
Edwardson, S. P., Abed, E., French, P., Dearden, G., Watkins, K. G., McBride, R., . . . Moore, A. J. (2005). Developments towards controlled three-dimensional laser forming of continuous surfaces. JOURNAL OF LASER APPLICATIONS, 17(4), 247-255. doi:10.2351/1.2080487
Laser forming of fibre metal laminates
Edwardson, S. P., French, P., Dearden, G., Watkins, K. G., & Cantwell, W. J. (2005). Laser forming of fibre metal laminates. LASERS IN ENGINEERING, 15(3-4), 233-255. Retrieved from https://www.webofscience.com/
Closed Loop 3-Dimensional Laser Forming of Developable Surfaces
Abed, E., Edwardson, S. P., Dearden, G., Watkins, K. G., Hand, D. P., McBride, R., . . . Moore, A. J. (2005). Closed Loop 3-Dimensional Laser Forming of Developable Surfaces. In F. Vollertsen, T. Seefeld, F. Vollertsen, & W. Juptner (Eds.), Ist International Workshop on Thermal Forming Vol. 26 (pp. 239-256). Bremen: BIAS Verlag.
Geometrical Influences on the Bend Angle Rate per Pass during Multi-Pass 2D Laser Forming
Edwardson, S. P., Watkins, K. G., Abed, E., Bartkowiak, K., & Dearden, G. (2005). Geometrical Influences on the Bend Angle Rate per Pass during Multi-Pass 2D Laser Forming. In F. Vollertsen, T. Seefeld, F. Vollertsen, & W. Juptner (Eds.), Ist International Workshop On Laser Forming Vol. 26 (pp. 29-46). Bremen: BIAS Verlag.
Laser Forming of Thin Metal Components for 2D and 3D Applications Using a High Beam Quality, Low Power Nd:YAG Laser and Rapid Scanning Optics
Bartkowiak, K., Edwardson, S. P., Borowski, J., Dearden, G., & Watkins, K. G. (2005). Laser Forming of Thin Metal Components for 2D and 3D Applications Using a High Beam Quality, Low Power Nd:YAG Laser and Rapid Scanning Optics. In F. Vollertsen, & T. Seefeld (Eds.), Ist International Workshoop on Thermal Forming Vol. 26 (pp. 111-130). Bremen: BIAS Verlag. Retrieved from http://www.lasers.org.uk/Liv/papers/Forming13.html
Laser Ignition of an IC Test Engine using an Nd: YAG Laser and the Effect of Key Laser Parameters on Engine Combustion Performance
Dodd, R., Mullett, J., Carroll, S., Dearden, G., Shenton, T., Watkins, K. G., . . . Keen, S. (2005). Laser Ignition of an IC Test Engine using an Nd: YAG Laser and the Effect of Key Laser Parameters on Engine Combustion Performance. In ALAC (Advanced Laser Applications Conference and Exposition) (pp. 104-111). Pittsfield MA: Laurin Publishing.
Laser forming of thin section non ferrous metals with a ND:YAG laser source
Bartkowiak, K., Borowski, J., Edwardson, S. P., Dearden, G., Carey, C., & Watkins, K. G. (2005). Laser forming of thin section non ferrous metals with a ND:YAG laser source. In International Congress on Applications of Lasers & Electro-Optics (pp. 101). Laser Institute of America. doi:10.2351/1.5060407
2004
2-D laser forming comparative study on Nd:YAG of titanium alloy Ti-6Al-4V
Bartkowiak, K., Edwardson, S. P., Dearden, G., & Watkins, K. G. (2004). 2-D laser forming comparative study on Nd:YAG of titanium alloy Ti-6Al-4V. In ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
Development of 2D and 3D laser forming strategies for thin section materials using scanning optics
Bartkowiak, K., Dearden, G., Edwardson, S. P., & Watkins, K. G. (2004). Development of 2D and 3D laser forming strategies for thin section materials using scanning optics. In ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
Iterative 3D laser forming of continuous surfaces
Edwardson, S. P., Moore, A. J., Abed, E., McBride, R., French, P., Hand, D. P., . . . Watkins, K. G. (2004). Iterative 3D laser forming of continuous surfaces. In ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
Sensing for monitoring of the laser-GMAW hybrid welding process
Travis, D., Dearden, G., Watkins, K. G., Reutzel, E. W., Martukanitz, R. P., & Tressler, J. F. (2004). Sensing for monitoring of the laser-GMAW hybrid welding process. In ICALEO 2004 - 23rd International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
'Compensation for uneven surfaces when building direct laser deposition structures on existing metallic parts'
Fearon, E. P., & Watkins, K. G. (2004). 'Compensation for uneven surfaces when building direct laser deposition structures on existing metallic parts'. In D. L. Bourell, R. H. Crawford, J. J. Beaman, K. L. Wood, & M. L. Harris (Eds.), The Fifteenth Solid Freeform Fabrication (SFF) Symposium (pp. 471-480). Austin, Texas: University of Texas at Austin.
'Increasing laser coupling using proactive layer height control'
Fearon, E. P., Watkins, K. G., & Sharp, M. C. (2004). 'Increasing laser coupling using proactive layer height control'. In M. Geiger, & A. Otto (Eds.), Laser Assisted Net Shape Engineering 4 Vol. 1 (pp. 511-521). Nuremburg: Meisenburg-Verlag.
'Optimisation Of Layer Height Control In Direct Laser Deposition'
Fearon, E. P., & Watkins, K. G. (2004). 'Optimisation Of Layer Height Control In Direct Laser Deposition'. In 23nd International Congress on Applications of Lasers & Electro-Optics (ICALEO 2004) Vol. 97 (pp. Paper no 1708). San Francisco: Laser Institute of America.
Forming a New Material
Edwardson, S. P., Dearden, G., Watkins, K. G., & Cantwell, W. J. (2004). Forming a New Material. Industrial Laser Solutions, 19(3), 16-20.
2003
Dynamic distortion measurements during laser forming of Ti-6Al-4V and their comparison with a finite element model
Reeves, M., Moore, A. J., Hand, D. P., Jones, J. D. C., Cho, J. R., Reed, R. C., . . . Watkins, K. G. (2003). Dynamic distortion measurements during laser forming of Ti-6Al-4V and their comparison with a finite element model. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 217(12), 1685-1696. doi:10.1243/095440503772680613
Strain gauge analysis of laser forming
Edwardson, S. P., Watkins, K. G., Dearden, G., French, P., & Magee, J. (2003). Strain gauge analysis of laser forming. JOURNAL OF LASER APPLICATIONS, 15(4), 225-232. doi:10.2351/1.1620000
A method of layer height control in direct laser fabrication of 304L stainless steel
Watkins, K. G., & Fearon, E. (2003). A method of layer height control in direct laser fabrication of 304L stainless steel. In International Congress on Applications of Lasers & Electro-Optics (pp. 904). Laser Institute of America. doi:10.2351/1.5060087
An experimental study of laser micro-forming using a pulsed Nd:YAG laser and scanning optics
Dearden, G., Taylor, C., Bartkowiak, K., Edwardson, S. P., & Watkins, K. G. (2003). An experimental study of laser micro-forming using a pulsed Nd:YAG laser and scanning optics. In International Congress on Applications of Lasers & Electro-Optics (pp. M409). Laser Institute of America. doi:10.2351/1.5060127
Laser forming of metal laminate composite materials
Edwardson, S. P., Dearden, G., French, P., Watkins, K. G., & Cantwell, W. J. (2003). Laser forming of metal laminate composite materials. In International Congress on Applications of Lasers & Electro-Optics (pp. 107). Laser Institute of America. doi:10.2351/1.5059977
2002
A system for dynamic shape measurements during laser processing
Reeves, M., Stoikou, M. D., Moore, A. J., Hand, D. P., Cho, J. R., Edwardson, S. P., . . . Jones, J. D. C. (2002). A system for dynamic shape measurements during laser processing. In ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
Blast and impact resistance studies of laser welded and riveted panel structures
Dearden, G., Simmons, M. C., Okon, P., Schleyer, G. K., & Watkins, K. G. (2002). Blast and impact resistance studies of laser welded and riveted panel structures. In ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
Laser welding of aluminium alloy 5083
Okon, P., Dearden, G., Watkins, K., Sharp, M., & French, P. (2002). Laser welding of aluminium alloy 5083. In ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
Strain gauge analysis of laser forming
Edwardson, S. P., Watkins, K. G., Dearden, G., French, P., & Magee, J. (2002). Strain gauge analysis of laser forming. In ICALEO 2002 - 21st International Congress on Applications of Laser and Electro-Optics, Congress Proceedings.
Ultraviolet laser removal of small metallic particles from silicon wafers
Curran, C., Lee, J. M., & Watkins, K. G. (2002). Ultraviolet laser removal of small metallic particles from silicon wafers. Optics and Lasers in Engineering, 38(6), 405-415. doi:10.1016/s0143-8166(02)00022-2
2001
Laser removal of copper particles from silicon wafers using UV, visible and IR radiation
Lee, J. M., Curran, C., & Watkins, K. G. (2001). Laser removal of copper particles from silicon wafers using UV, visible and IR radiation. Applied Physics A Materials Science & Processing, 73(2), 219-224. doi:10.1007/s003390100685
Removal of small particles on silicon wafer by laser-induced airborne plasma shock waves
Lee, J. M., & Watkins, K. G. (2001). Removal of small particles on silicon wafer by laser-induced airborne plasma shock waves. Journal of Applied Physics, 89(11), 6496-6500. doi:10.1063/1.1353562
3D Laser Forming of Saddle Shapes
Edwardson, S. P., Watkins, K. G., Dearden, G., & Magee, J. (2001). 3D Laser Forming of Saddle Shapes. In M. Gieger, & A. Otto (Eds.), LANE 2001 (pp. 559-568). Erlangen, Germany: Meisenbach Bamberg.
Generation of 3D Shapes Using a Laser Forming Technique
Edwardson, S. P., Watkins, K. G., Dearden, G., & Magee, J. (2001). Generation of 3D Shapes Using a Laser Forming Technique. In X. Chen (Ed.), ICALEO (pp. Section D). Florida, USA: JLA.
Initial studies of laser beam performance monitoring using a novel camera-based in-line beam monitoring system
Dearden, G., Sharp, M. C., Green, L. I., French, P. W., & Watkins, K. G. (2001). Initial studies of laser beam performance monitoring using a novel camera-based in-line beam monitoring system. In 20th International Congress on Applications of Lasers & Electro-Optics (ICALEO2001). Florida: Laser Institute of America.
Laser Forming of Aerospace Alloys
Watkins, K. G., Edwardson, S. P., Magee, J., Dearden, G., French, P., Cooke, R. L., . . . Calder, N. J. (n.d.). Laser Forming of Aerospace Alloys. In SAE Technical Paper Series Vol. 1. SAE International. doi:10.4271/2001-01-2610
The Laser Cladding of Hastalloy to Critical Surfaces of Stainless Steel Components
Henry, M., Fearon, E. P., Dearden, G., & Watkins, K. G. (2001). The Laser Cladding of Hastalloy to Critical Surfaces of Stainless Steel Components. In 20th International Congress on Applications of Lasers & Electro-Optics (ICALEO2001) Vol. 92 (pp. 631-640). Orlando: Laser Institute of America.
1996
Coins and methods for producing coins
Watkins, K., & Steen, P. (1996). Coins and methods for producing coins.