Publications
Selected publications
- Sensitivity or Bayesian model updating: a comparison of techniques using the DLR AIRMOD test data (Journal article - 2017)
- Parameter selection for model updating with global sensitivity analysis (Journal article - 2019)
- Experimental direct spatial damping identification by the Stabilised Layers Method (Journal article - 2018)
- Experimental Nonlinear Control for Flutter Suppression in a Nonlinear Aeroelastic System (Journal article - 2017)
2024
Application of the sensitivity updating methodology on a scaled research wing demonstrator
Isnardi, I., Mottershead, J. E., Constantin, L., Cooper, J. E., Menga, E., Gambioli, F., & Fichera, S. (2024). Application of the sensitivity updating methodology on a scaled research wing demonstrator. In AIAA SCITECH 2024 Forum. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2024-2443
2023
Stochastic Model Updating with Uncertainty Quantification: An Overview and Tutorial
Bi, S., Beer, M., Cogan, S., & Mottershead, J. (2023). Stochastic Model Updating with Uncertainty Quantification: An Overview and Tutorial. Mechanical Systems and Signal Processing, 204. doi:10.1016/j.ymssp.2023.110784
An experimental study on the stochastic model updating of a structure with irreducible parameter variability and fixed but unknown hyperparameters
Isnardi, I., Menga, E., Mottershead, J. E., & Fichera, S. (2023). An experimental study on the stochastic model updating of a structure with irreducible parameter variability and fixed but unknown hyperparameters. Mechanical Systems and Signal Processing, 200, 110597. doi:10.1016/j.ymssp.2023.110597
2022
A two-level framework for model reduction and stochastic updating of a dynamic system
Isnardi, I., Menga, E., Mottershead, J., & Fichera, S. (2022). A two-level framework for model reduction and stochastic updating of a dynamic system. Oxford.
Editorial: Recent advances in stochastic model updating
Bi, S., Beer, M., & Mottershead, J. (2022). Editorial: Recent advances in stochastic model updating. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 172. doi:10.1016/j.ymssp.2022.108971
H2-optimal vibration control using receptance-based regional eigenvalue assignment
Wei, X., Xia, R., Mottershead, J. E., & He, X. (2022). H2-optimal vibration control using receptance-based regional eigenvalue assignment. Mechanical Systems and Signal Processing, 167, 108591. doi:10.1016/j.ymssp.2021.108591
Eulogy: Hamid Ahmadian
Mottershead, J. E. (2022). Eulogy: Hamid Ahmadian. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 165. doi:10.1016/j.ymssp.2021.108461
A TWO-LEVEL STOCHASTIC FRAMEWORK FOR MODEL UPDATING IN STRUCTURAL DYNAMICS
Isnardi, I., Menga, E., Mottershead, J. E., & Fichera, S. (2022). A TWO-LEVEL STOCHASTIC FRAMEWORK FOR MODEL UPDATING IN STRUCTURAL DYNAMICS. In Proceedings of the International Forum of Aeroelasticity and Structural Dynamics 2022, IFASD 2022.
Framework for stochastic updating in structural dynamics
Isnardi, I., Menga, E., Mottershead, J. E., & Fichera, S. (2022). Framework for stochastic updating in structural dynamics. In Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics (pp. 4751-4760).
Model Updating
Mottershead, J. E., Link, M., Friswell, M. I., & Schedlinski, C. (2022). Model Updating. In Handbook of Experimental Structural Dynamics (pp. 897-949). Springer New York. doi:10.1007/978-1-4614-4547-0_18
2021
MODEL REDUCTION AND STOCHASTIC UPDATING OF A VIBRATING SYSTEM
Isnardi, I., Menga, E., Mottershead, J. E., & Fichera, S. (2021). MODEL REDUCTION AND STOCHASTIC UPDATING OF A VIBRATING SYSTEM. In 32nd Congress of the International Council of the Aeronautical Sciences, ICAS 2021.
Model Updating
Mottershead, J. E., Link, M., Friswell, M. I., & Schedlinski, C. (2021). Model Updating. In Handbook of Experimental Structural Dynamics (pp. 1-53). Springer New York. doi:10.1007/978-1-4939-6503-8_18-2
2020
Aeroelastic stability analysis using stochastic structural modifications
Adamson, L. J., Fichera, S., & Mottershead, J. E. (2020). Aeroelastic stability analysis using stochastic structural modifications. JOURNAL OF SOUND AND VIBRATION, 477. doi:10.1016/j.jsv.2020.115333
Receptance-based robust eigenstructure assignment
Adamson, L. J., Fichera, S., & Mottershead, J. E. (2020). Receptance-based robust eigenstructure assignment. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 140. doi:10.1016/j.ymssp.2020.106697
A state-of-the-art review on theory and engineering applications of eigenvalue and eigenvector derivatives
Lin, R. M., Mottershead, J. E., & Ng, T. Y. (2020). A state-of-the-art review on theory and engineering applications of eigenvalue and eigenvector derivatives. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 138. doi:10.1016/j.ymssp.2019.106536
Nonlinear Aeroservoelastic Control in the Presence of Uncertainty
D'Amico, N., Adamson, L. J., Fichera, S., Paoletti, P., Innocenti, G., & Mottershead, J. E. (2020). Nonlinear Aeroservoelastic Control in the Presence of Uncertainty. In AIAA Scitech 2020 Forum. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2020-1676
Gain scheduling in receptance-based control of aeroelastic systems
Adamson, L. J., Braun, O., Fichera, S., & Mottershead, J. E. (2020). Gain scheduling in receptance-based control of aeroelastic systems. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2020) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2020) (pp. 195-205). Retrieved from https://www.webofscience.com/
Model Updating
Mottershead, J. E., Link, M., Friswell, M. I., & Schedlinski, C. (2020). Model Updating. In Handbook of Experimental Structural Dynamics (pp. 1-53). Springer New York. doi:10.1007/978-1-4939-6503-8_18-1
2019
Compressed sensing for OMA using full-field vibration images
Chang, Y. -H., Wang, W., Chang, J. -Y., & Mottershead, J. E. (2019). Compressed sensing for OMA using full-field vibration images. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 129, 394-406. doi:10.1016/j.ymssp.2019.04.031
The minimum norm multi-input multi-output receptance method for partial pole placement
Mokrani, B., Batou, A., Fichera, S., Adamson, L., Alaluf, D., & Mottershead, J. E. (2019). The minimum norm multi-input multi-output receptance method for partial pole placement. Mechanical Systems and Signal Processing, 129, 437-448. doi:10.1016/j.ymssp.2019.03.003
Pole placement in uncertain dynamic systems by variance minimisation
Adamson, L. J., Fichera, S., Mokrani, B., & Mottershead, J. E. (2019). Pole placement in uncertain dynamic systems by variance minimisation. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 127, 290-305. doi:10.1016/j.ymssp.2019.03.007
Subsystem identification in structures with a human occupant based on composite frequency response functions
Wei, X., Zivanovic, S., Russell, J., & Mottershead, J. E. (2019). Subsystem identification in structures with a human occupant based on composite frequency response functions. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 120, 290-307. doi:10.1016/j.ymssp.2018.09.018
A multivariate interval approach for inverse uncertainty quantification with limited experimental data
Faes, M., Broggi, M., Patelli, E., Govers, Y., Mottershead, J., Beer, M., & Moens, D. (2019). A multivariate interval approach for inverse uncertainty quantification with limited experimental data. Mechanical Systems and Signal Processing, 118, 534-548. doi:10.1016/j.ymssp.2018.08.050
Experimental feedback linearisation of a non-smooth nonlinear system by the method of receptances
Lisitano, D., Jiffri, S., Bonisoli, E., & Mottershead, J. E. (2019). Experimental feedback linearisation of a non-smooth nonlinear system by the method of receptances. MATHEMATICS AND MECHANICS OF SOLIDS, 24(2), 465-482. doi:10.1177/1081286517744601
High-Bandwidth Morphing Actuator for Aeroelastic Model Control
Fichera, S., Isnardi, I., & Mottershead, J. E. (2019). High-Bandwidth Morphing Actuator for Aeroelastic Model Control. AEROSPACE, 6(2). doi:10.3390/aerospace6020013
Basis-updating for data compression of displacement maps from dynamic DIC measurements
Chang, Y. -H., Wang, W., Siebert, T., Chang, J. -Y., & Mottershead, J. E. (2019). Basis-updating for data compression of displacement maps from dynamic DIC measurements. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 115, 405-417. doi:10.1016/j.ymssp.2018.05.058
Parameter selection for model updating with global sensitivity analysis
Yuan, Z., Liang, P., Silva, T., Yu, K., & Mottershead, J. E. (2019). Parameter selection for model updating with global sensitivity analysis. Mechanical Systems and Signal Processing, 115, 483-496. doi:10.1-16/j.ymssp.2018.05.048
Probabilistic Control Optimization of Aeroservoelastic Systems with Uncertainty
Adamson, L. J., Fichera, S., & Mottershead, J. (2019). Probabilistic Control Optimization of Aeroservoelastic Systems with Uncertainty. In AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2019-1754
Inverse quantification of epistemic uncertainty under scarce data: Bayesian or Interval approach?
Faes, M., Broggi, M., Patelli, E., Govers, Y., Mottershead, J., Beer, M., & Moens, D. (2019). Inverse quantification of epistemic uncertainty under scarce data: Bayesian or Interval approach?. In 13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP 2019.
Inverse quantification of epistemic uncertainty under scarce data: Bayesian or Interval approach?
Faes, M., Broggi, M., Patelli, E., Govers, Y., Mottershead, J., Beer, M., & Moens, D. (2019). Inverse quantification of epistemic uncertainty under scarce data: Bayesian or Interval approach?. In 13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP 2019.
Inverse quantification of epistemic uncertainty under scarce data: Bayesian or Interval approach?
Faes, M., Broggi, M., Patelli, E., Govers, Y., Mottershead, J., Beer, M., & Moens, D. (2019). Inverse quantification of epistemic uncertainty under scarce data: Bayesian or Interval approach?. In 13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP 2019.
Inverse quantification of epistemic uncertainty under scarce data: Bayesian or Interval approach?
Faes, M., Broggi, M., Patelli, E., Govers, Y., Mottershead, J., Beer, M., & Moens, D. (2019). Inverse quantification of epistemic uncertainty under scarce data: Bayesian or Interval approach?. In 13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP 2019.
Multiple-Input Multiple-Output Experimental Aeroelastic Control Using a Receptance-Based Method
Mokrani, B., Palazzo, F., Mottershead, J. E., & Fichera, S. (2019). Multiple-Input Multiple-Output Experimental Aeroelastic Control Using a Receptance-Based Method. AIAA Journal: devoted to aerospace research and development, 57(7), 3066-3077. doi:10.2514/1.J057855
2018
Experimental direct spatial damping identification by the Stabilised Layers Method
Lisitano, D., Bonisoli, E., & Mottershead, J. E. (2018). Experimental direct spatial damping identification by the Stabilised Layers Method. JOURNAL OF SOUND AND VIBRATION, 437, 325-339. doi:10.1016/j.jsv.2018.08.055
Parameter selection for model updating based on the global sensitivity method
Yuan, Z., Yu, K., & Mottershead, J. E. (2018). Parameter selection for model updating based on the global sensitivity method. In Journal of Physics: Conference Series Vol. 1106 (pp. 012004). IOP Publishing. doi:10.1088/1742-6596/1106/1/012004
Experimental feedback linearisation of a vibrating system with a non-smooth nonlinearity
Lisitano, D., Jiffri, S., Bonisoli, E., & Mottershead, J. E. (2018). Experimental feedback linearisation of a vibrating system with a non-smooth nonlinearity. JOURNAL OF SOUND AND VIBRATION, 416, 192-212. doi:10.1016/j.jsv.2017.11.047
Experimental feedback linearisation of a vibrating system with a non-smooth nonlinearity
Lisitano, D., Jiffri, S., Bonisoli, E., & Mottershead, J. E. (2018). Experimental feedback linearisation of a vibrating system with a non-smooth nonlinearity. Journal of Sound and Vibration, 416, 192-212. doi:10.1016/j.jsv.2017.11.047
Quantifying and managing uncertainty in operational modal analysis
Au, S. -K., Brownjohn, J. M. W., & Mottershead, J. E. (2018). Quantifying and managing uncertainty in operational modal analysis. Mechanical Systems and Signal Processing, 102, 139-157. doi:10.1016/j.ymssp.2017.09.017
Erratum to “The sensitivity method in finite element model updating: A tutorial” [Mech. Syst. Signal Process. 25(7) (2010) 2275–2296]
Mottershead, J. E., Link, M., & Friswell, M. I. (2018). The sensitivity method in finite element model updating: A tutorial (vol 25, pg 2275, 2010). MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 99, 946-947. doi:10.1016/j.ymssp.2017.03.009
Design of a receptance-based active aeroelastic controller in the presence of parametric uncertainties
Fichera, S., Guimarães, T. A. M., Jiffri, S., Rade, D. A., & Mottershead, J. E. (2018). Design of a receptance-based active aeroelastic controller in the presence of parametric uncertainties. In 31st Congress of the International Council of the Aeronautical Sciences, ICAS 2018.
Feedback linearisation of nonlinear vibration problems: A new formulation by the method of receptances
Zhen, C., Jiffri, S., Li, D., Xiang, J., & Mottershead, J. E. (2018). Feedback linearisation of nonlinear vibration problems: A new formulation by the method of receptances. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 98, 1056-1068. doi:10.1016/j.ymssp.2017.05.048
Minimisation of the effect of aleatory uncertainties on dynamic systems by active control using the method of receptances
Adamson, L. J., Fichera, S., & Mottershead, J. E. (2018). Minimisation of the effect of aleatory uncertainties on dynamic systems by active control using the method of receptances. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018) (pp. 165-173). Retrieved from https://www.webofscience.com/
Multi-input multi-output aeroelastic control using the receptance method
Mokrani, B., Palazzo, F., Fichera, S., Adamson, L., & Mottershead, J. E. (2018). Multi-input multi-output aeroelastic control using the receptance method. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018) (pp. 153-163). Retrieved from https://www.webofscience.com/
Stabilised Layer Method for linear and nonlinear spatial non classical damping identification
Lisitano, D., Bonisoli, E., & Mottershead, J. E. (2018). Stabilised Layer Method for linear and nonlinear spatial non classical damping identification. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018) (pp. 991-1003). Retrieved from https://www.webofscience.com/
2017
Fuzzy finite element model updating of the DLR AIRMOD test structure
Khodaparast, H. H., Govers, Y., Dayyani, I., Adhikari, S., Link, M., Friswell, M. I., . . . Sienz, J. (2017). Fuzzy finite element model updating of the DLR AIRMOD test structure. APPLIED MATHEMATICAL MODELLING, 52, 512-526. doi:10.1016/j.apm.2017.08.001
Experimental Nonlinear Control for Flutter Suppression in a Nonlinear Aeroelastic System
Jiffri, S., Fichera, S., Mottershead, J. E., & Da Ronch, A. (2017). Experimental Nonlinear Control for Flutter Suppression in a Nonlinear Aeroelastic System. Journal of Guidance, Control, and Dynamics, 40(8), 1925-1938. doi:10.2514/1.G002519
Sensitivity or Bayesian model updating: a comparison of techniques using the DLR AIRMOD test data
Patelli, E., Govers, Y., Broggi, M., Gomes, H. M., Link, M., & Mottershead, J. E. (2017). Sensitivity or Bayesian model updating: a comparison of techniques using the DLR AIRMOD test data. ARCHIVE OF APPLIED MECHANICS, 87(5), 905-925. doi:10.1007/s00419-017-1233-1
Model Updating Strategy of the DLR-AIRMOD Test Structure
Patelli, E., Broggi, M., Govers, Y., & Mottershead, J. E. (2017). Model Updating Strategy of the DLR-AIRMOD Test Structure. In X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017) Vol. 199 (pp. 978-983). doi:10.1016/j.proeng.2017.09.221
Output-only full-field modal testing
Chang, Y. -H., Wang, W., Patterson, E. A., Chang, J. -Y., & Mottershead, J. E. (2017). Output-only full-field modal testing. In X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017) Vol. 199 (pp. 423-428). doi:10.1016/j.proeng.2017.09.137
Robust passivity-based continuous sliding-mode control for under-actuated nonlinear wing sections
Wei, X., & Mottershead, J. E. (2017). Robust passivity-based continuous sliding-mode control for under-actuated nonlinear wing sections. Aerospace Science and Technology, 60, 9-19. doi:10.1016/j.ast.2016.10.024
Selection of modelling parameters for stochastic model updating
Silva, T. A. N., & Mottershead, J. E. (2017). Selection of modelling parameters for stochastic model updating. In SYMCOMP 2017 - 3rd International Conference on Numerical and Symbolic Computation: Developments and Applications, Proceedings (pp. 69-81).
2016
Measurement precision and spatial resolution with Kriging digital image correlation
Wang, D. Z., & Mottershead, J. E. (2016). Measurement precision and spatial resolution with Kriging digital image correlation. Strojniški vestnik - Journal of Mechanical Engineering. doi:10.5545/sv-jme.2016.3736
Block-decoupling vibration control using eigenstructure assignment
Wei, X., & Mottershead, J. E. (2016). Block-decoupling vibration control using eigenstructure assignment. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 74, 11-28. doi:10.1016/j.ymssp.2015.03.028
Parameter selection and covariance updating
Silva, T. A. N., Maia, N. M. M., Link, M., & Mottershead, J. E. (2016). Parameter selection and covariance updating. Mechanical Systems and Signal Processing, 70-71, 269-283. doi:10.1016/j.ymssp.2015.08.034
Partial pole placement by feedback control with inaccessible degrees of freedom
Wei, X., Mottershead, J. E., & Ram, Y. M. (2016). Partial pole placement by feedback control with inaccessible degrees of freedom. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 70-71, 334-344. doi:10.1016/j.ymssp.2015.09.044
Uncertainty quantification in DIC with Kriging regression
Wang, D., Diaz De La O, F. A., Wang, W. V., Lin, X., Patterson, E., & Mottershead, J. (2016). Uncertainty quantification in DIC with Kriging regression. Optics and Lasers in Engineering, 78, 182-195. doi:10.1016/j.optlaseng.2015.09.006
Keynote Presentation: Progress in stochastic model updating
Mottershead, J. E. (2016). Keynote Presentation: Progress in stochastic model updating. Maresias, Brazil.
Design and wind tunnel test of a MODular aeroelastic FLEXible wing (MODFLEX)
Fichera, S., Jiffri, S., & Mottershead, J. E. (2016). Design and wind tunnel test of a MODular aeroelastic FLEXible wing (MODFLEX). In PROCEEDINGS OF ISMA2016 INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING AND USD2016 INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (pp. 445-456). Retrieved from https://www.webofscience.com/
Feedback Linearization in Systems with Nonsmooth Nonlinearities
Jiffri, S., Paoletti, P., & Mottershead, J. E. (2016). Feedback Linearization in Systems with Nonsmooth Nonlinearities. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 39(04), 814-825. doi:10.2514/1.G001220
Model Updating with the Kriging Predictor: Effect of Code Uncertainty
Liang, P., Mottershead, J. E., & DiazDelaO, F. A. (2016). Model Updating with the Kriging Predictor: Effect of Code Uncertainty. In PROCEEDINGS OF ISMA2016 INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING AND USD2016 INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (pp. 4363-4376). Retrieved from https://www.webofscience.com/
2015
MSSP Associate Editors
Mottershead, J. E. (2015). MSSP Associate Editors. Mechanical Systems and Signal Processing, 60-61, iii. doi:10.1016/s0888-3270(15)00133-8
Perspectives on model updating
Mottershead, J., Broggi, M., Gomes, H. M., Govers, Y., Haddad Khodaparast, H., Link, M., . . . Silva, T. A. N. (2015). Perspectives on model updating. Lagos, Portugal.
A Vision for MSSP
Mottershead, J. E. (2015). A Vision for MSSP. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 56-57, 1. doi:10.1016/j.ymssp.2014.12.005
A Block Decoupling Control Algorithm for Vibration Suppression of Linear Structures
Wei, X., & Mottershead, J. E. (2015). A Block Decoupling Control Algorithm for Vibration Suppression of Linear Structures. In VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY Vol. 23 (pp. 329-338). doi:10.1007/978-3-319-09918-7_29
A comparison of two stochastic model updating methods using the DLR AIRMOD test structure
Govers, Y., Khodaparast, H. H., Link, M., & Mottershead, J. E. (2015). A comparison of two stochastic model updating methods using the DLR AIRMOD test structure. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 52-53, 105-114. doi:10.1016/j.ymssp.2014.06.003
Full-field digital image correlation with Kriging regression
Wang, D., Diaz De La O, F. A., Wang, W., & Mottershead, J. (2020). Full-field digital image correlation with Kriging regression. Optics and Lasers in Engineering, 67, 105-115. doi:10.1016/j.optlaseng.2014.11.004
Image analysis of full-field vibration and strain data
Mottershead, J., & Wang, W. V. (2015). Image analysis of full-field vibration and strain data. Heriot-Wall University, Edinburgh, UK.
Image analysis of full-field vibration and strain measurements
Mottershead, J., & Wang, W. V. (2015). Image analysis of full-field vibration and strain measurements. Ljubljana, Slovenia.
Nonlinear Control of an Aeroelastic System with a Non-smooth Structural Nonlinearity
Jiffri, S., & Mottershead, J. E. (2015). Nonlinear Control of an Aeroelastic System with a Non-smooth Structural Nonlinearity. In VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY Vol. 23 (pp. 317-328). doi:10.1007/978-3-319-09918-7_28
Pole placement and active vibration control in structures
Mottershead, J., Ram, Y. M., Jiffri, S., Fichera, S., & Wei, X. (2015). Pole placement and active vibration control in structures. Polish Academy of Sciences, IPPT PAN, Warsaw, Poland.
The Sensitivity Method in Stochastic Model Updating
Mottershead, J. E., Link, M., Silva, T. A. N., Govers, Y., & Khodaparast, H. H. (2015). The Sensitivity Method in Stochastic Model Updating. doi:10.1007/978-3-319-09918-7_5
The use of Kriging in stochastic model updating and its effect on parameter estimates
Liang, P., Diaz De La O, F. A., Patelli, E., & Mottershead, J. (2015). The use of Kriging in stochastic model updating and its effect on parameter estimates. In International Conference on Engineering Dynamics (ICEDyn 2015). Lagos, Portugal.
Uncertainty quantification by fuzzifying an experimental data set
Silva, T. A. N., Carvalho, A., Maia, N. M. M., & Mottershead, J. (2015). Uncertainty quantification by fuzzifying an experimental data set. In International Conference on Engineering Dynamics (ICEDyn2015). Lagos, Portugal.
2014
Corneal topography matching by iterative registration
Wang, J., Elsheikh, A., Davey, P., Wang, W. V., Bao, F., & Mottershead, J. (2014). Corneal topography matching by iterative registration. Journal Of Engineering In Medicine - Part H, 228(11), 1154-1167. doi:10.1177/0954411914559080
Image decomposition and uncertainty quantification for the assessment of manufacturing tolerances in stress analysis
Marcuccio, G., Bonisoli, E., Tornincasa, S., Mottershead, J. E., Patelli, E., & Wang, W. (2014). Image decomposition and uncertainty quantification for the assessment of manufacturing tolerances in stress analysis. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 49(8), 618-631. doi:10.1177/0309324714533694
Aeroelastic Systems with Softening Nonlinearity
Wei, X., & Mottershead, J. E. (2014). Aeroelastic Systems with Softening Nonlinearity. AIAA Journal, 52(9), 1915-1927. doi:10.2514/1.J052712
Model Updating by Uncertain Parameter Inference
Gomes, H. M., Broggi, M., Patelli, E., & Mottershead, J. E. (2014). Model Updating by Uncertain Parameter Inference. In Vulnerability, Uncertainty, and Risk (pp. 1523-1532). American Society of Civil Engineers. doi:10.1061/9780784413609.153
Robust Design Optimization of Structural Systems Under Evolutionary Stochastic Seismic Excitation
Mitseas, I. P., Kougioumtzoglou, I. A., Beer, M., Patelli, E., & Mottershead, J. E. (2014). Robust Design Optimization of Structural Systems Under Evolutionary Stochastic Seismic Excitation. In Unknown Book (pp. 215-224). American Society of Civil Engineers. doi:10.1061/9780784413609.022
Stochastic Model Updating of the DLR AIRMOD Structure
Govers, Y., Haddad Khodaparast, H., Link, M., & Mottershead, J. E. (2014). Stochastic Model Updating of the DLR AIRMOD Structure. In Vulnerability, Uncertainty, and Risk (pp. 475-484). American Society of Civil Engineers. doi:10.1061/9780784413609.049
A Nonlinear Controller for Flutter Suppression: from Simulation to Wind Tunnel Testing
Da Ronch, A., Tantaroudas, N. D., Badcock, K. J., & Mottershead, J. (2014). A Nonlinear Controller for Flutter Suppression: from Simulation to Wind Tunnel Testing. In 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2014-0345
A nonlinear controller for flutter suppression: from simulation to wind tunnel testing
Da Ronch, A., Tantaroudas, S., Jiffri, S., & Mottershead, J. (2014). A nonlinear controller for flutter suppression: from simulation to wind tunnel testing. In AIAA Science and Technology Forum and Exhibition. MD, USA: AIAA.
Adaptive Feedback Linearisation and Control of a Flexible Aircraft Wing
Jiffri, S., Mottershead, J. E., & Cooper, J. E. (2014). Adaptive Feedback Linearisation and Control of a Flexible Aircraft Wing. In Unknown Conference (pp. 683-699). Springer New York. doi:10.1007/978-1-4614-6585-0_66
Aeroelastic systems with softening nonlinearity
Wei, X., & Mottershead, J. E. (2014). Aeroelastic systems with softening nonlinearity. AIAA Journal, 52(9), 1927-1952.
Analysis of displacement fields from a high-speed impact using shape descriptors
Burguete, R. L., Lampeas, G., Mottershead, J. E., Patterson, E. A., Pipino, A., Siebert, T., & Wang, W. (2014). Analysis of displacement fields from a high-speed impact using shape descriptors. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 49(4), 212-223. doi:10.1177/0309324713498074
Approximate Bayesian Computation for Finite Element Model Updating
DiazDelaO, F. A., Gomes, H. M., & Mottershead, J. E. (2014). Approximate Bayesian Computation for Finite Element Model Updating. In Unknown Conference (pp. 301-306). Springer International Publishing. doi:10.1007/978-3-319-04552-8_29
Experimental and numerical study of nonlinear dynamic behaviour of an aerofoil
Fichera, S., Jiffri, S., Wei, X., Da Ronch, A., Tantaroudas, N., & Mottershead, J. E. (2014). Experimental and numerical study of nonlinear dynamic behaviour of an aerofoil. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2014) AND INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2014) (pp. 3609-3618). Retrieved from https://www.webofscience.com/
Feedback Linearisation for Nonlinear Vibration Problems
Jiffri, S., Paoletti, P., Cooper, J. E., & Mottershead, J. E. (2014). Feedback Linearisation for Nonlinear Vibration Problems. SHOCK AND VIBRATION, 2014. doi:10.1155/2014/106531
Fuzzy model updating and its application to the DLR AIRMOD test structure
Khodaparast, H. H., Govers, Y., Adhikari, S., Link, M., Friswell, M. I., Mottershead, J. E., & Sienz, J. (2014). Fuzzy model updating and its application to the DLR AIRMOD test structure. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2014) AND INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2014) (pp. 4509-4522). Retrieved from https://www.webofscience.com/
Inferring Structural Variability Using Modal Analysis in a Bayesian Framework
Gomes, H. M., DiazDelaO, F. A., & Mottershead, J. E. (2014). Inferring Structural Variability Using Modal Analysis in a Bayesian Framework. In Unknown Conference (pp. 363-373). Springer International Publishing. doi:10.1007/978-3-319-04552-8_36
Limit Cycle Assignment in Nonlinear Aeroelastic Systems Using Describing Functions and the Receptance Method
Wei, X., & Mottershead, J. E. (2014). Limit Cycle Assignment in Nonlinear Aeroelastic Systems Using Describing Functions and the Receptance Method. In Unknown Conference (pp. 701-713). Springer New York. doi:10.1007/978-1-4614-6585-0_67
Nonlinear control of systems with non-smooth nonlinearities
Jiffri, S., & Mottershead, J. (2014). Nonlinear control of systems with non-smooth nonlinearities. In 5th International Conference on Computational Methods (ICCM2014). Cambridge, UK.
The role of controllability and observability in partial pole placement by the method of receptances
Wei, X., Maha, A., Ram, Y. M., & Mottershead, J. E. (2014). The role of controllability and observability in partial pole placement by the method of receptances. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2014) AND INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2014) (pp. 201-208). Retrieved from https://www.webofscience.com/
The sensitivity method in stochastic model updating
Mottershead, J., Link, M., Silva, T. A. N., Govers, Y., & Haddad Khodaparast, H. (2014). The sensitivity method in stochastic model updating. University of Manchester.
2013
Model Updating Using Shape Descriptors from Full-Field Images
Wang, W., Mottershead, J. E., Patterson, E., Siebert, T., & Ihle, A. (2013). Model Updating Using Shape Descriptors from Full-Field Images. In Unknown Conference (pp. 425-436). Springer New York. doi:10.1007/978-1-4614-6546-1_46
Principles of Image Processing and Feature Recognition Applied to Full-Field Measurements
Mottershead, J. E., & Wang, W. (2013). Principles of Image Processing and Feature Recognition Applied to Full-Field Measurements. In Unknown Conference (pp. 411-424). Springer New York. doi:10.1007/978-1-4614-6546-1_45
Shape-Descriptor Frequency Response Functions and Modal Analysis
Mottershead, J. E., Wang, W., Siebert, T., & Pipino, A. (2013). Shape-Descriptor Frequency Response Functions and Modal Analysis. In Unknown Conference (pp. 437-445). Springer New York. doi:10.1007/978-1-4614-6546-1_47
Multiple-input active vibration control by partial pole placement using the method of receptances
Ram, Y. M., & Mottershead, J. E. (2013). Multiple-input active vibration control by partial pole placement using the method of receptances. Mechanical Systems and Signal Processing, 40(2), 727-735. doi:10.1016/j.ymssp.2013.06.008
Active Control of a Nonlinear Flexible Aircraft Wing
Jiffri, M., Mottershead, J., & Cooper, J. (2013, June 17). Active Control of a Nonlinear Flexible Aircraft Wing. In ICEDyn 2013 (International Conference on Structural Engineering Dynamics). Sesimbra, Portugal.
Active control for flutter suppression: An experimental investigation
Papatheou, E., Tantaroudas, N. D., Da Ronch, A., Cooper, J. E., & Mottershead, J. E. (2013). Active control for flutter suppression: An experimental investigation. In IFASD 2013 - International Forum on Aeroelasticity and Structural Dynamics.
Adaptive moment descriptors for full-field strain and displacement measurements
Wang, W., & Mottershead, J. E. (2013). Adaptive moment descriptors for full-field strain and displacement measurements. The Journal of Strain Analysis for Engineering Design, 48(1), 16-35. doi:10.1177/0309324712460485
Geometrical and Dimensional Uncertainties Effects Quantification for Stress/Strain Field Characterization
Marcuccio, G., Mottershead, J., Bonisoli, E., Tornincasa, S., & Patelli, E. (2013). Geometrical and Dimensional Uncertainties Effects Quantification for Stress/Strain Field Characterization. In 2013 PROGNOSTICS AND HEALTH MANAGEMENT CONFERENCE (PHM) Vol. 33 (pp. 1099-1104). doi:10.3303/CET1333184
Identification of Composite Delamination Using the Krawtchouk Moment Descriptor
Wang, W. Z., Wang, D. Z., Mottershead, J. E., & Lampeas, G. (n.d.). Identification of Composite Delamination Using the Krawtchouk Moment Descriptor. In Key Engineering Materials Vol. 569-570 (pp. 33-40). Trans Tech Publications, Ltd.. doi:10.4028/www.scientific.net/kem.569-570.33
Nonlinear control of a flexible aeroelastic system
Jiffri, S., Paoletti, P., Mottershead, J. E., & Cooper, J. E. (2013). Nonlinear control of a flexible aeroelastic system. In IFASD 2013 - International Forum on Aeroelasticity and Structural Dynamics.
Special issue on validation of computational solid mechanics models
Fu, S., & Patterson, E. (2013). Special issue on validation of computational solid mechanics models. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 48(1), 3-4. doi:10.1177/0309324712473553
2012
Active vibration control experiments on an AgustaWestland W30 helicopter airframe
Mottershead, J. E., Tehrani, M. G., James, S., & Court, P. (2012). Active vibration control experiments on an AgustaWestland W30 helicopter airframe. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226(6), 1504-1516. doi:10.1177/0954406211423609
Frequency response functions of shape features from full-field vibration measurements using digital image correlation
Wang, W., Mottershead, J. E., Siebert, T., & Pipino, A. (2012). Frequency response functions of shape features from full-field vibration measurements using digital image correlation. Mechanical Systems and Signal Processing, 28, 333-347. doi:10.1016/j.ymssp.2011.11.023
Active vibration control experiments on an AgustaWestland W30 helicopter airframe
Mottershead, J. E., Ghandchi Tehrani, M., James, S., & Court, P. (2012). Active vibration control experiments on an AgustaWestland W30 helicopter airframe. Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 226(6), 1524-1536.
An Overview of the Receptance Method in Active Vibration Control
Tehrani, M. G., & Mottershead, J. E. (2012). An Overview of the Receptance Method in Active Vibration Control. IFAC Proceedings Volumes, 45(2), 1174-1178. doi:10.3182/20120215-3-at-3016.00208
Flutter control using vibration test data: Theory, rig design and preliminary results
Papatheou, E., Wei, X., Jiffri, S., Prandina, M., Ghandchi Tehrani, M., Bode, S., . . . Cooper, J. E. (2012). Flutter control using vibration test data: Theory, rig design and preliminary results. In International Conference on Noise and Vibration Engineering 2012, ISMA 2012, including USD 2012: International Conference on Uncertainty in Structure Dynamics Vol. 4 (pp. 3047-3060).
Full-field modal identification using image moment descriptors
Wang, W., Mottershead, J. E., Siebert, T., & Pipino, A. (2012). Full-field modal identification using image moment descriptors. In International Conference on Noise and Vibration Engineering 2012, ISMA 2012, including USD 2012: International Conference on Uncertainty in Structure Dynamics Vol. 3 (pp. 2133-2143).
How structural model variability influences transonic aeroelastic stability
Marques, S., Badcock, K. J., Khodaparast, H. H., & Mottershead, J. E. (2012). How structural model variability influences transonic aeroelastic stability. Journal of Aircraft, 49(5), 1189-1199. doi:10.2514/1.C031103
Identifying structural variability using Bayesian inference
Dwight, R. P., Haddad-Khodaparast, H., & Mottershead, J. E. (2012). Identifying structural variability using Bayesian inference. In International Conference on Noise and Vibration Engineering 2012, ISMA 2012, including USD 2012: International Conference on Uncertainty in Structure Dynamics Vol. 6 (pp. 4681-4695).
Interval model updating of the AIRMOD structure
Khodaparast, H. H., Mottershead, J. E., Govers, Y., & Link, M. (2012). Interval model updating of the AIRMOD structure. In International Conference on Noise and Vibration Engineering 2012, ISMA 2012, including USD 2012: International Conference on Uncertainty in Structure Dynamics Vol. 6 (pp. 4717-4731).
2011
Uncertain systems: Modelling and updating
Kyprianou, A., & Mottershead, J. E. (2011). Uncertain systems: Modelling and updating. In 18th International Congress on Sound and Vibration 2011, ICSV 2011 Vol. 2 (pp. 995-1002).
Application of High Speed Image Correlation for Measurement of Mode Shapes of a Car Bonnet
Siebert, T., Wang, W. Z., Mottershead, J. E., & Pipino, A. (n.d.). Application of High Speed Image Correlation for Measurement of Mode Shapes of a Car Bonnet. In Applied Mechanics and Materials Vol. 70 (pp. 45-50). Trans Tech Publications, Ltd.. doi:10.4028/www.scientific.net/amm.70.45
Image Analysis for Full-Field Displacement/Strain Data: Method and Applications
Wang, W. Z., Mottershead, J. E., Sebastian, C. M., Patterson, E. A., Siebert, T., Ihle, A., & Pipino, A. (n.d.). Image Analysis for Full-Field Displacement/Strain Data: Method and Applications. Applied Mechanics and Materials, 70, 39-44. doi:10.4028/www.scientific.net/amm.70.39
Image processing of full-field strain data and its use in model updating
Wang, W., Mottershead, J. E., Sebastian, C. M., & Patterson, E. A. (2011). Image processing of full-field strain data and its use in model updating. In 9TH INTERNATIONAL CONFERENCE ON DAMAGE ASSESSMENT OF STRUCTURES (DAMAS 2011) Vol. 305. doi:10.1088/1742-6596/305/1/012011
Shape features and finite element model updating from full-field strain data
Wang, W., Mottershead, J. E., Sebastian, C. M., & Patterson, E. A. (2011). Shape features and finite element model updating from full-field strain data. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 48(11-12), 1644-1657. doi:10.1016/j.ijsolstr.2011.02.010
Interval model updating with irreducible uncertainty using the Kriging predictor
Khodaparast, H. H., Mottershead, J. E., & Badcock, K. J. (2011). Interval model updating with irreducible uncertainty using the Kriging predictor. Mechanical Systems and Signal Processing, 25(4), 1204-1226. doi:10.1016/j.ymssp.2010.10.009
Experimental investigations of a multi-span flexible structure subjected to moving masses
Stancioiu, D., Ouyang, H., Mottershead, J. E., & James, S. (2011). Experimental investigations of a multi-span flexible structure subjected to moving masses. JOURNAL OF SOUND AND VIBRATION, 330(9), 2004-2016. doi:10.1016/j.jsv.2010.11.011
Finite element model updating from full-field vibration measurement using digital image correlation
Wang, W., Mottershead, J. E., Ihle, A., Siebert, T., & Reinhard Schubach, H. (2011). Finite element model updating from full-field vibration measurement using digital image correlation. Journal of Sound and Vibration, 330(8), 1599-1620. doi:10.1016/j.jsv.2010.10.036
Calculating the Influence of Structural Uncertainty on Aeroelastic Limit Cycle Response
Badcock, K., Timme, S., Marques, S., Khodaparast, H., & Mottershead, J. (2011). Calculating the Influence of Structural Uncertainty on Aeroelastic Limit Cycle Response. In 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2011-1741
Partial pole placement with time delay in structures using the receptance and the system matrices
Ram, Y. M., Mottershead, J. E., & Tehrani, M. G. (2011). Partial pole placement with time delay in structures using the receptance and the system matrices. Linear Algebra and its Applications, 434(7), 1689-1696. doi:10.1016/j.laa.2010.07.014
Eigenvalue Assignment Problems in Vibration Using Measured Receptances: Passive Modification and Active Control
Mottershead, J. E., Tehrani, M. G., & Ram, Y. M. (2011). Eigenvalue Assignment Problems in Vibration Using Measured Receptances: Passive Modification and Active Control. In CISM International Centre for Mechanical Sciences (pp. 179-202). Springer Vienna. doi:10.1007/978-3-7091-0696-9_6
Interval model updating with irreducible uncertainty using the Kriging predictor
Khodaparast, H. H., Mottershead, J. E., & Badcock, K. J. (2011). Interval model updating with irreducible uncertainty using the Kriging predictor. Mechanical Systems and Signal Processing, 25(4), 1204-1226. doi:10.1016/j.ymssp.2010.10.009
Progress in developing a standard for dynamic strain analysis
Hack, E., Lampeas, G., Mottershead, J., Patterson, E., Siebert, T., & Whelan, M. (2011). Progress in developing a standard for dynamic strain analysis. In Unknown Conference (pp. 425-429). Springer New York. doi:10.1007/978-1-4614-0222-0_52
Robust pole placement in structures by the method of receptances
Ghandchi Tehrani, M., Mottershead, J. E., Shenton, A. T., & Ram, Y. M. (2011). Robust pole placement in structures by the method of receptances. Mechanical Systems and Signal Processing, 25(1), 112-122. doi:10.1016/j.ymssp.2010.04.005
Robust pole placement in structures by the method of receptances
Ghandchi Tehrani, M., Mottershead, J. E., Shenton, A. T., & Ram, Y. M. (2011). Robust pole placement in structures by the method of receptances. Mechanical Systems and Signal Processing, 25(1), 112-122. doi:10.1016/j.ymssp.2010.04.005
Standards for Validating Stress Analyses by Integrating Simulation and Experimentation
Hack, E., Lampeas, G., Mottershead, J., Patterson, E., Siebert, T., & Whelan, M. (2011). Standards for Validating Stress Analyses by Integrating Simulation and Experimentation. In Unknown Conference (pp. 23-29). Springer New York. doi:10.1007/978-1-4419-9792-0_4
Stochastic Model Updating: Perturbation, Interval Method and Bayesian Inference
Mottershead, J. E., Khodaparast, H. H., Dwight, R. P., & Badcock, K. J. (2011). Stochastic Model Updating: Perturbation, Interval Method and Bayesian Inference. In Unknown Conference (pp. 13-23). Springer Netherlands. doi:10.1007/978-94-007-2069-5_2
Structural Dynamics with Coincident Eigenvalues: Modelling and Testing
Bonisoli, E., Delprete, C., Esposito, M., & Mottershead, J. E. (2011). Structural Dynamics with Coincident Eigenvalues: Modelling and Testing. In Unknown Conference (pp. 325-337). Springer New York. doi:10.1007/978-1-4419-9299-4_29
The sensitivity method in finite element model updating: A tutorial
Mottershead, J. E., Link, M., & Friswell, M. I. (2011). The sensitivity method in finite element model updating: A tutorial. Mechanical Systems and Signal Processing, 25(7), 2275-2296. doi:10.1016/j.ymssp.2010.10.012
Transonic aeroelastic simulation for instability searches and uncertainty analysis
Badcock, K. J., Timme, S., Marques, S., Khodaparast, H., Prandina, M., Mottershead, J. E., . . . Woodgate, M. A. (2011). Transonic aeroelastic simulation for instability searches and uncertainty analysis. PROGRESS IN AEROSPACE SCIENCES, 47(5), 392-423. doi:10.1016/j.paerosci.2011.05.002
2010
Construction of shape features for the representation of full-field displacement/strain data
Wang, W., Mottershead, J. E., Patki, A., & Patterson, E. A. (2010). Construction of shape features for the representation of full-field displacement/strain data. In ADVANCES IN EXPERIMENTAL MECHANICS VII Vol. 24-25 (pp. 365-+). doi:10.4028/www.scientific.net/AMM.24-25.365
Partial pole placement in structures by the method of receptances: Theory and experiments
Ghandchi Tehrani, M., Elliott, R. N. R., & Mottershead, J. E. (2010). Partial pole placement in structures by the method of receptances: Theory and experiments. Journal of Sound and Vibration, 329(24), 5017-5035. doi:10.1016/j.jsv.2010.06.018
Standards for validating stress analyses by integrating simulation and experimentation
Hack, E., Lampeas, G., Mottershead, J., Patterson, E., Siebert, T., & Whelan, M. (2010). Standards for validating stress analyses by integrating simulation and experimentation. In Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010 Vol. 1 (pp. 100-106).
Transonic Aeroelastic Stability Predictions Under the Influence of Structural Variability
Marques, S., Badcock, K. J., Khodaparast, H. H., & Mottershead, J. E. (2010). Transonic Aeroelastic Stability Predictions Under the Influence of Structural Variability. Journal of Aircraft, 47(4), 1229-1239. doi:10.2514/1.46971
Propagation of structural uncertainty to linear aeroelastic stability
Khodaparast, H. H., Mottershead, J. E., & Badcock, K. J. (2010). Propagation of structural uncertainty to linear aeroelastic stability. Computers & Structures, 88(3-4), 223-236. doi:10.1016/j.compstruc.2009.10.005
Propagation of structural uncertainty to linear aeroelastic stability
Khodaparast, H. H., Mottershead, J. E., & Badcock, K. J. (2010). Propagation of structural uncertainty to linear aeroelastic stability. Computers and Structures, 88(3-4), 223-236. doi:10.1016/j.compstruc.2009.10.005
APPLICATION OF THE PERTURBATION METHOD WITH PARAMETER WEIGHTING MATRIX ASSIGNMENTS FOR ESTIMATING VARIABILITY IN A SET OF NOMINALLY IDENTICAL WELDED STRUCTURES
Abu Husain, N., Khodaparast, H. H., Mottershead, J. E., & Ouyang, H. (2010). APPLICATION OF THE PERTURBATION METHOD WITH PARAMETER WEIGHTING MATRIX ASSIGNMENTS FOR ESTIMATING VARIABILITY IN A SET OF NOMINALLY IDENTICAL WELDED STRUCTURES. In PROCEEDINGS OF THE ASME 10TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS, 2010, VOL 5 (pp. 95-104). Retrieved from https://www.webofscience.com/
Active Aeroelastic Control Using the Receptance Method
Singh, K. V., McDonough, L. A., Mottershead, J., & Cooper, J. (2010). Active Aeroelastic Control Using the Receptance Method. In Volume 8: Dynamic Systems and Control, Parts A and B (pp. 137-146). ASMEDC. doi:10.1115/imece2010-38877
How Structural Model Variability Influences Transonic Aeroelastic Stability
Marques, S., Badcock, K. J., Khodaparast, H. H., & Mottershead, J. E. (2012). How Structural Model Variability Influences Transonic Aeroelastic Stability. Journal of Aircraft, 49(5), 1189-1199. doi:10.2514/1.c031103
Image decomposition as a tool for validating stress analysis models
Patki, A., Wang, W., Mottershead, J., & Patterson, E. (2010). Image decomposition as a tool for validating stress analysis models. In ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6 Vol. 6. doi:10.1051/epjconf/20100646005
Interval model updating: Method and application
Khodaparast, H. H., Mottershead, J. E., & Badcock, K. J. (2010). Interval model updating: Method and application. In Proceedings of ISMA 2010 - International Conference on Noise and Vibration Engineering, including USD 2010 (pp. 5277-5289).
Transonic aeroelastic stability predictions under the influence of structural variability
Marques, S., Badcock, K. J., Khodaparast, H. H., & Mottershead, J. E. (2010). Transonic aeroelastic stability predictions under the influence of structural variability. Journal of Aircraft, 47(4), 1229-1239. doi:10.2514/1.46971
Validation of full-field techniques: discussion of experiences
Hack, E., Burguete, R., Siebert, T., Davighi, A., Mottershead, J., Lampeas, G., . . . Pipino, A. (2010). Validation of full-field techniques: discussion of experiences. In ICEM 14: 14TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, VOL 6 Vol. 6. doi:10.1051/epjconf/20100646004
2009
Vibration mode shape recognition using the Zernike moment descriptor
Wang, W., Mottershead, J. E., & Mares, C. (2009). Vibration mode shape recognition using the Zernike moment descriptor. In Conference Proceedings of the Society for Experimental Mechanics Series.
Vibration mode shape recognition using image processing
Wang, W., Mottershead, J. E., & Mares, C. (2009). Vibration mode shape recognition using image processing. Journal of Sound and Vibration, 326(3-5), 909-938. doi:10.1016/j.jsv.2009.05.024
Vibration mode shape recognition using image processing
Wang, W., Mottershead, J. E., & Mares, C. (2009). Vibration mode shape recognition using image processing. Journal of Sound and Vibration, 326(3-5), 909-938. doi:10.1016/j.jsv.2009.05.024
Mode-shape recognition and finite element model updating using the Zernike moment descriptor
Wang, W., Mottershead, J. E., & Mares, C. (2009). Mode-shape recognition and finite element model updating using the Zernike moment descriptor. Mechanical Systems and Signal Processing, 23(7), 2088-2112. doi:10.1016/j.ymssp.2009.03.015
Assignment of eigenvalue sensitivities from receptance measurements
Mottershead, J. E., Tehrani, M. G., & Ram, Y. M. (2009). Assignment of eigenvalue sensitivities from receptance measurements. Mechanical Systems and Signal Processing, 23(6), 1931-1939. doi:10.1016/j.ymssp.2008.04.004
Shape descriptors for mode-shape recognition and model updating
Wang, W., Mottershead, J. E., & Mares, C. (2009). Shape descriptors for mode-shape recognition and model updating. In Journal of Physics: Conference Series Vol. 181 (pp. 012004). IOP Publishing. doi:10.1088/1742-6596/181/1/012004
Special issue on ‘Inverse Problems in MSSP’
Mottershead, J. E., & Datta, B. N. (2009). Special issue on ‘Inverse Problems in MSSP’. Mechanical Systems and Signal Processing, 23(6), 1731-1733. doi:10.1016/j.ymssp.2009.03.002
State feedback control with time delay
Ram, Y. M., Singh, A., & Mottershead, J. E. (2009). State feedback control with time delay. Mechanical Systems and Signal Processing, 23(6), 1940-1945. doi:10.1016/j.ymssp.2008.04.012
Vibration of a continuous beam excited by a moving mass and experimental validation
Stancioiu, D., James, S., Ouyang, H., & Mottershead, J. E. (2009). Vibration of a continuous beam excited by a moving mass and experimental validation. In 7TH INTERNATIONAL CONFERENCE ON MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS Vol. 181. doi:10.1088/1742-6596/181/1/012084
An assessment of damping identification methods
Prandina, M., Mottershead, J. E., & Bonisoli, E. (2009). An assessment of damping identification methods. Journal of Sound and Vibration, 323(3-5), 662-676. doi:10.1016/j.jsv.2009.01.022
Vibration of a continuous beam with multiple elastic supports excited by a moving two-axle system with separation
Stancioiu, D., Ouyang, H., & Mottershead, J. E. (2009). Vibration of a continuous beam with multiple elastic supports excited by a moving two-axle system with separation. MECCANICA, 44(3), 293-303. doi:10.1007/s11012-008-9172-0
CFD Based Aeroelastic Stability Predictions Under the Influence of Structural Variability
Badcock, K., Khodaparast, H., Marques, S., & Mottershead, J. (2009). CFD Based Aeroelastic Stability Predictions Under the Influence of Structural Variability. In 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2009-2324
An Inverse Method to Assign Receptances by Using Classical Vibration Absorbers
Jianfeng Zhu., Mottershead, J. E., & Kyprianou, A. (2009). An Inverse Method to Assign Receptances by Using Classical Vibration Absorbers. Journal of Vibration and Control, 15(1), 53-84. doi:10.1177/1077546307085058
Clustering of Parameter Sensitivities: Examples from a Helicopter Airframe Model Updating Exercise
Shahverdi, H., Mares, C., Wang, W., & Mottershead, J. E. (2009). Clustering of Parameter Sensitivities: Examples from a Helicopter Airframe Model Updating Exercise. Shock and Vibration, 16(1), 75-87. doi:10.1155/2009/982439
2008
Perturbation methods for the estimation of parameter variability in stochastic model updating
Khodaparast, H. H., Mottershead, J. E., & Friswell, M. I. (2008). Perturbation methods for the estimation of parameter variability in stochastic model updating. Mechanical Systems and Signal Processing, 22(8), 1751-1773. doi:10.1016/j.ymssp.2008.03.001
Dynamics of a beam and a moving two-axle system with separation
Stancioiu, D., Ouyang, H., & Mottershead, J. E. (2008). Dynamics of a beam and a moving two-axle system with separation. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 222(10), 1947-1956. doi:10.1243/09544062JMES978
Active vibration suppression by pole-zero placement using measured receptances
Mottershead, J. E., Tehrani, M. G., James, S., & Ram, Y. M. (2008). Active vibration suppression by pole-zero placement using measured receptances. Journal of Sound and Vibration, 311(3-5), 1391-1408. doi:10.1016/j.jsv.2007.10.024
Vibration of a beam excited by a moving oscillator considering separation and reattachment
Stancioiu, D., Ouyang, H., & Mottershead, J. E. (2008). Vibration of a beam excited by a moving oscillator considering separation and reattachment. JOURNAL OF SOUND AND VIBRATION, 310(4-5), 1128-1140. doi:10.1016/j.jsv.2007.08.019
Dynamics of Multi-Span Continuous Plate Structures Traversed By Moving Loads Considering Separation and Reattachment
Stancioiu, D., Ouyang, H., & Mottershead, J. E. (2008). Dynamics of Multi-Span Continuous Plate Structures Traversed By Moving Loads Considering Separation and Reattachment. In PROCEEDINGS OF ISMA 2008: INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING, VOLS. 1-8 (pp. 715-726). Retrieved from https://www.webofscience.com/
Eigenvalue Sensitivity Assignment by the Receptance Method
Tehrani, M. G., Mottershead, J. E., & Ram, Y. M. (2008). Eigenvalue Sensitivity Assignment by the Receptance Method. In Volume 2: Automotive Systems; Bioengineering and Biomedical Technology; Computational Mechanics; Controls; Dynamical Systems (pp. 695-700). ASMEDC. doi:10.1115/esda2008-59357
Separation between a beam with multiple elastic supports and a moving two-axle system
Stancioiu, D., Ouyang, H., & Mottershead, J. E. (2008). Separation between a beam with multiple elastic supports and a moving two-axle system. In 7th European Conference on Structural Dynamics, EURODYN 2008.
2007
Identification of nonlinear bolted lap-joint parameters by force-state mapping
Jalali, H., Ahmadian, H., & Mottershead, J. E. (2007). Identification of nonlinear bolted lap-joint parameters by force-state mapping. International Journal of Solids and Structures, 44(25-26), 8087-8105. doi:10.1016/j.ijsolstr.2007.06.003
A numerical-analytical combined method for vibration of a beam excited by a moving flexible body
Ouyang, H., & Mottershead, J. E. (2007). A numerical-analytical combined method for vibration of a beam excited by a moving flexible body. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 72(10), 1181-1191. doi:10.1002/nme.2052
Minimum Relative Entropy Criterion for Damage Detection and Location
Kyprianou, A., Mares, C., Charalambous, C. D., & Mottershead, J. E. (n.d.). Minimum Relative Entropy Criterion for Damage Detection and Location. Key Engineering Materials, 347, 421-426. doi:10.4028/www.scientific.net/kem.347.421
Methods for refinement of structural finite element models: Summary of the garteur AG14 collaborative programme
Hatch, C., Skingle, G. W., Greaves, C. H., Lieven, N. A. J., Coote, J. E., Friswell, M. I., . . . Rottmayr, H. (2007). Methods for refinement of structural finite element models: Summary of the garteur AG14 collaborative programme. In National Aerospace Laboratory NLR - 32nd European Rotorcraft Forum, ERF 2006 Vol. 2 (pp. 879-906).
Receptance Method in Active Vibration Control
Ram, Y. M., & Mottershead, J. E. (2007). Receptance Method in Active Vibration Control. AIAA Journal, 45(3), 562-567. doi:10.2514/1.24349
Minimum Relative Entropy Criterion for Damage Detection and Location
Kyprianou, A., Mares, C., Charalambous, C. D., & Mottershead, J. E. (n.d.). Minimum Relative Entropy Criterion for Damage Detection and Location. In Unknown Conference (pp. 421-426). Trans Tech Publications Ltd.. doi:10.4028/0-87849-444-8.421
2006
Experimental and theoretical studies of a bolted joint excited by a torsional dynamic load
Ouyang, H., Oldfield, M. J., & Mottershead, J. E. (2006). Experimental and theoretical studies of a bolted joint excited by a torsional dynamic load. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 48(12), 1447-1455. doi:10.1016/j.ijmecsci.2006.07.015
The receptance method in active vibration control
Ram, Y. M., & Mottershead, J. E. (2006). The receptance method in active vibration control. In Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Vol. 11 (pp. 7580-7589).
Structural modification of a helicopter tailcone
Mottershead, J. E., Ghandchi Tehrani, M., Stancioiu, D., James, S., & Shahverdi, H. (2006). Structural modification of a helicopter tailcone. Journal of Sound and Vibration, 298(1-2), 366-384. doi:10.1016/j.jsv.2006.05.026
Stochastic model updating: Part 2—application to a set of physical structures
Mottershead, J. E., Mares, C., James, S., & Friswell, M. I. (2006). Stochastic model updating: Part 2—application to a set of physical structures. Mechanical Systems and Signal Processing, 20(8), 2171-2185. doi:10.1016/j.ymssp.2005.06.007
Structural modification of a helicopter tailcone
Mottershead, J. E., Ghandchi Tehrani, M., Stancioiu, D., James, S., & Shahverdi, H. (2006). Structural modification of a helicopter tailcone. Journal of Sound and Vibration, 298(1-2), 366-384. doi:10.1016/j.jsv.2006.05.026
Stochastic model updating: Part 1—theory and simulated example
Mares, C., Mottershead, J. E., & Friswell, M. I. (2006). Stochastic model updating: Part 1—theory and simulated example. Mechanical Systems and Signal Processing, 20(7), 1674-1695. doi:10.1016/j.ymssp.2005.06.006
The generalized Vincent circle in vibration suppression
Tehrani, M. G., Wang, W., Mares, C., & Mottershead, J. E. (2006). The generalized Vincent circle in vibration suppression. Journal of Sound and Vibration, 292(3-5), 661-675. doi:10.1016/j.jsv.2005.08.024
Modelling and updating of large surface-to-surface joints in the AWE-MACE structure
Ahmadian, H., Mottershead, J. E., James, S., Friswell, M. I., & Reece, C. A. (2006). Modelling and updating of large surface-to-surface joints in the AWE-MACE structure. Mechanical Systems and Signal Processing, 20(4), 868-880. doi:10.1016/j.ymssp.2005.05.005
Finite Element Model Updating of Large Structures by the Clustering of Parameter Sensitivities
Shahverdi, H., Mares, C., Wang, W., Greaves, C. H., & Mottershead, J. E. (n.d.). Finite Element Model Updating of Large Structures by the Clustering of Parameter Sensitivities. In Applied Mechanics and Materials Vol. 5-6 (pp. 85-92). Trans Tech Publications, Ltd.. doi:10.4028/www.scientific.net/amm.5-6.85
Inverse eigenvalue problems in vibration absorption: Passive modification and active control
Mottershead, J. E., & Ram, Y. M. (2006). Inverse eigenvalue problems in vibration absorption: Passive modification and active control. Mechanical Systems and Signal Processing, 20(1), 5-44. doi:10.1016/j.ymssp.2005.05.006
Receptance Method in Active Vibration Control
Mottershead, J. E., & Ram, Y. M. (2006). Receptance Method in Active Vibration Control. Mechanical Systems and Signal Processing (Invited Review), 20(1), 562-567. doi:10.2514/1.2349
Vibration of a beam excited by a moving flexible body
Ouyang, H., & Mottershead, J. E. (2006). Vibration of a beam excited by a moving flexible body. In MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS VI, PROCEEDINGS Vol. 5-6 (pp. 457-+). doi:10.4028/www.scientific.net/AMM.5-6.457
2005
Uncertainty identification by the maximum likelihood method
Fonseca, J. R., Friswell, M. I., Mottershead, J. E., & Lees, A. W. (2005). Uncertainty identification by the maximum likelihood method. Journal of Sound and Vibration, 288(3), 587-599. doi:10.1016/j.jsv.2005.07.006
Model updating contributions by John O'Callahan
Mottershead, J. E. (2005). Model updating contributions by John O'Callahan. In Conference Proceedings of the Society for Experimental Mechanics Series.
Simplified models of bolted joints under harmonic loading
Oldfield, M., Ouyang, H., & Mottershead, J. E. (2005). Simplified models of bolted joints under harmonic loading. COMPUTERS & STRUCTURES, 84(1-2), 25-33. doi:10.1016/j.compstruc.2005.09.007
Updating a spot-welded joint using randomized parameters and a collection of measurements
Mares, C., Mottershead, J. E., & Friswell, M. I. (2005). Updating a spot-welded joint using randomized parameters and a collection of measurements. In 12th International Congress on Sound and Vibration 2005, ICSV 2005 Vol. 3 (pp. 1937-1944).
Structural modification. Part 1: rotational receptances
Mottershead, J. E., Kyprianou, A., & Ouyang, H. (2005). Structural modification. Part 1: rotational receptances. JOURNAL OF SOUND AND VIBRATION, 284(1-2), 249-265. doi:10.1016/j.jsv.2004.06.021
Structural modification. Part 2: assignment of natural frequencies and antiresonances by an added beam
Kyprianou, A., Mottershead, J. E., & Ouyang, H. (2005). Structural modification. Part 2: assignment of natural frequencies and antiresonances by an added beam. JOURNAL OF SOUND AND VIBRATION, 284(1-2), 267-281. doi:10.1016/j.jsv.2004.06.020
Uncertainty Quantification Using Maximum Likelihood: Experimental Validation
Fonseca, J., Friswell, M., Mottershead, J., Lees, A., & Adhikari, S. (2005). Uncertainty Quantification Using Maximum Likelihood: Experimental Validation. In 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2005-2143
A review of robust optimal design and its application in dynamics
Zang, C., Friswell, M. I., & Mottershead, J. E. (2005). A review of robust optimal design and its application in dynamics. Computers & Structures, 83(4-5), 315-326. doi:10.1016/j.compstruc.2004.10.007
Finite element models of spot welds in structural dynamics: review and updating
Palmonella, M., Friswell, M. I., Mottershead, J. E., & Lees, A. W. (2005). Finite element models of spot welds in structural dynamics: review and updating. Computers & Structures, 83(8-9), 648-661. doi:10.1016/j.compstruc.2004.11.003
Model structure correction and updating of aeroengine casings using fictitious mass modifications
Shahverdi, H., Mares, C., & Mottershead, J. E. (2005). Model structure correction and updating of aeroengine casings using fictitious mass modifications. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219(1), 19-30. doi:10.1243/095440605x8342
2004
Disc brake squeal - an experimental approach
James, S., Ouyang, H., Brookfield, D. J., & Mottershead, J. E. (2004). Disc brake squeal - an experimental approach. In BRAKING 2004: VEHICLE BRAKING AND CHASSIS CONTROL (pp. 179-188). Retrieved from https://www.webofscience.com/
Experimental study and analytical modelling of a bolted joint subjected to harmonic excitation
Oldfield, M. J., Ouyang, H., & Mottershead, J. E. (2005). Experimental study and analytical modelling of a bolted joint subjected to harmonic excitation. In Proceedings of ISMA 2004: International Conference on Noise and Vibration Engineering, Vols 1-8 (pp. 1235-1247). Retrieved from https://www.webofscience.com/
Stochastic model updating of a spot welded structure
Mares, C., Mottershead, J. E., & Friswell, M. I. (2004). Stochastic model updating of a spot welded structure. In Proceedings of the 2004 International Conference on Noise and Vibration Engineering, ISMA (pp. 1885-1898).
Uncertainty identification and robust design
Fonseca, J., Friswell, M., Lees, A., & Mottershead, J. (2004). Uncertainty identification and robust design. In Proceedings of the 2004 International Conference on Noise and Vibration Engineering, ISMA (pp. 3267-3272).
Vibration suppression using Vincent's circle
Tehrani, M. G., Wang, W., Mares, C., & Mottershead, J. E. (2004). Vibration suppression using Vincent's circle.
Linear eigenvalue analysis of the disc-brake squeal problem
Cao, Q., Ouyang, H., Friswell, M. I., & Mottershead, J. E. (2004). Linear eigenvalue analysis of the disc-brake squeal problem. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 61(9), 1546-1563. doi:10.1002/nme.1127
Dynamic instability of an elastic disk under the action of a rotating friction couple
Ouyang, H., & Mottershead, J. E. (2004). Dynamic instability of an elastic disk under the action of a rotating friction couple. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 71(6), 753-758. doi:10.1115/1.1795815
Guidelines for the implementation of the CWELD and ACM2 spot weld models in structural dynamics
Palmonella, M., Friswell, M. I., Mottershead, J. E., & Lees, A. W. (2004). Guidelines for the implementation of the CWELD and ACM2 spot weld models in structural dynamics. Finite Elements in Analysis and Design, 41(2), 193-210. doi:10.1016/j.finel.2004.04.003
Quantification of Uncertainty Using Inverse Methods
Friswell, M., Fonseca, J., Mottershead, J., & Lees, A. (2004). Quantification of Uncertainty Using Inverse Methods. In 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2004-1672
Assignment of natural frequencies by an added mass and one or more springs
Kyprianou, A., Mottershead, J. E., & Ouyang, H. J. (2004). Assignment of natural frequencies by an added mass and one or more springs. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 18(2), 263-289. doi:10.1016/S0888-3270(02)00220-0
Complex‐Damped Dynamic Systems in the Time and Frequency Domains
Bonisoli, E., & Mottershead, J. E. (2004). Complex‐Damped Dynamic Systems in the Time and Frequency Domains. Shock and Vibration, 11(3-4), 209-225. doi:10.1155/2004/849417
Experimental and Analytical Study of the Hysteretic Behaviour of Bolted Joints
Oldfield, M. J., Ouyang, H., & Mottershead, J. E. (2004). Experimental and Analytical Study of the Hysteretic Behaviour of Bolted Joints. In Volume 2 (pp. 27-32). ASMEDC. doi:10.1115/esda2004-58136
2003
Dynamic modeling of spot welds using thin layer interface theory
Ahmadian, H., Jalali, H., Mottershead, J. E., & Friswell, M. I. (2003). Dynamic modeling of spot welds using thin layer interface theory. In Proceedings of the Tenth International Congress on Sound and Vibration (pp. 3439-3446).
Vibration and squeal of a disc brake: modelling and experimental results
Ouyang, H., Cao, Q., Mottershead, J. E., & Treyde, T. (2003). Vibration and squeal of a disc brake: modelling and experimental results. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 217(D10), 867-875. doi:10.1243/095440703769683270
A moving-load model for disc-brake stability analysis
Ouyang, H., Mottershead, J. E., & Li, W. (2003). A moving-load model for disc-brake stability analysis. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 125(1), 53-58. doi:10.1115/1.1521954
Car disc brake squeal: Theoretical and experimental study
Cao, Q., Friswell, M. I., Ouyang, H., Mottershead, J. E., & James, S. (2003). Car disc brake squeal: Theoretical and experimental study. In MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS Vol. 440-4 (pp. 269-276). doi:10.4028/www.scientific.net/MSF.440-441.269
Disc brake squeal - An experimental approach
James, S., Ouyang, H., Brookfield, D. J., & Mottershead, J. E. (2003). Disc brake squeal - An experimental approach. In MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS Vol. 440-4 (pp. 237-244). doi:10.4028/www.scientific.net/MSF.440-441.237
Estimation of rotational frequency responses
Mottershead, J. E., Kyprianou, A., & Ouyang, H. (2003). Estimation of rotational frequency responses. In DAMAGE ASSESSMENT OF STRUCTURES, PROCEEDINGS Vol. 245-2 (pp. 157-165). doi:10.4028/www.scientific.net/KEM.245-246.157
Improving Spot Weld Models in Structural Dynamics
Palmonella, M., Friswell, M. I., Mares, C., & Mottershead, J. E. (2003). Improving Spot Weld Models in Structural Dynamics. In Volume 1: 23rd Computers and Information in Engineering Conference, Parts A and B (pp. 379-388). ASMEDC. doi:10.1115/detc2003/cie-48212
Modelling and simulation of bolted joints under harmonic excitation
Oldfield, M., Ouyang, H. J., Mottershead, J. E., & Kyprianou, A. (2003). Modelling and simulation of bolted joints under harmonic excitation. In MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS Vol. 440-4 (pp. 421-428). doi:10.4028/www.scientific.net/MSF.440-441.421
ON POLE–ZERO PLACEMENT BY UNIT-RANK MODIFICATION
PRELLS, U., MOTTERSHEAD, J. E., & FRISWELL, M. I. (2003). ON POLE–ZERO PLACEMENT BY UNIT-RANK MODIFICATION. Mechanical Systems and Signal Processing, 17(3), 611-633. doi:10.1006/mssp.2002.1529
Pseudo Tests on Axisymmetric Structures
Shahverdi, H., Mares, C., & Mottershead, J. E. (n.d.). Pseudo Tests on Axisymmetric Structures. In Materials Science Forum Vol. 440-441 (pp. 415-420). Trans Tech Publications, Ltd.. doi:10.4028/www.scientific.net/msf.440-441.415
RESULTS OBTAINED BY MINIMISING NATURAL-FREQUENCY ERRORS AND USING PHYSICAL REASONING
MARES, C., MOTTERSHEAD, J. E., & FRISWELL, M. I. (2003). RESULTS OBTAINED BY MINIMISING NATURAL-FREQUENCY ERRORS AND USING PHYSICAL REASONING. Mechanical Systems and Signal Processing, 17(1), 39-46. doi:10.1006/mssp.2002.1537
2002
Identification of bolted-joint interface models
Ahmadian, H., Ebrahimi, M., Mottershead, J. E., & Friswell, M. I. (2002). Identification of bolted-joint interface models. In Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA (pp. 1741-1747).
Review of parameter uncertainty propagation methods in structural dynamic analysis
Fonseca, J., Mares, C., Friswell, M., & Mottershead, J. (2002). Review of parameter uncertainty propagation methods in structural dynamic analysis. In Proceedings of the 2002 International Conference on Noise and Vibration Engineering, ISMA (pp. 1853-1859).
Physical Realization of Generic-Element Parameters in Model Updating
Ahmadian, H., Mottershead, J. E., & Friswell, M. I. (2002). Physical Realization of Generic-Element Parameters in Model Updating. Journal of Vibration and Acoustics, 124(4), 628-633. doi:10.1115/1.1505028
A tribute to the contribution of Gérard Lallement to structural dynamics
Cogan, S., Hemez, F. M., Link, M., Mottershead, J. E., Wada, B., & Zhang, C. (2002). A tribute to the contribution of Gérard Lallement to structural dynamics. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 4753 II (pp. 1464-1477).
FICTITIOUS MODIFICATIONS FOR THE SEPARATION OF CLOSE MODES
MOTTERSHEAD, J. E., MARES, C., & JAMES, S. (2002). FICTITIOUS MODIFICATIONS FOR THE SEPARATION OF CLOSE MODES. Mechanical Systems and Signal Processing, 16(5), 741-755. doi:10.1006/mssp.2002.1502
MODEL UPDATING USING ROBUST ESTIMATION
MARES, C., FRISWELL, M. I., & MOTTERSHEAD, J. E. (2002). MODEL UPDATING USING ROBUST ESTIMATION. Mechanical Systems and Signal Processing, 16(1), 169-183. doi:10.1006/mssp.2000.1375
Physical realization of updating parameters
Ahmadian, H., Mottershead, J. E., & Friswell, M. I. (2002). Physical realization of updating parameters. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 4753 I (pp. 206-209).
Separation of close modes in axisymmetric structures
Mottershead, J. E., Mares, C., & James, S. (2002). Separation of close modes in axisymmetric structures. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 4753 II (pp. 1452-1457).
2001
Unstable travelling waves in the friction-induced vibration of discs
Ouyang, H., & Mottershead, J. E. (2001). Unstable travelling waves in the friction-induced vibration of discs. JOURNAL OF SOUND AND VIBRATION, 248(4), 768-779. doi:10.1006/jsvi.2001.3720
BOUNDARY CONDITION IDENTIFICATION BY SOLVING CHARACTERISTIC EQUATIONS
AHMADIAN, H., MOTTERSHEAD, J. E., & FRISWELL, M. I. (2001). BOUNDARY CONDITION IDENTIFICATION BY SOLVING CHARACTERISTIC EQUATIONS. Journal of Sound and Vibration, 247(5), 755-763. doi:10.1006/jsvi.2001.3708
A bounded region of disc-brake vibration instability
Ouyang, H., & Mottershead, J. E. (2001). A bounded region of disc-brake vibration instability. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 123(4), 543-545. doi:10.1115/1.1394200
COMPLEX AND DEFECTIVE ZEROS IN CROSS RECEPTANCES
MOTTERSHEAD, J. E. (2001). COMPLEX AND DEFECTIVE ZEROS IN CROSS RECEPTANCES. Journal of Sound and Vibration, 246(1), 190-197. doi:10.1006/jsvi.2001.3579
Structural Modification for the Assignment of Zeros Using Measured Receptances
Mottershead, J. E. (2001). Structural Modification for the Assignment of Zeros Using Measured Receptances. Journal of Applied Mechanics, 68(5), 791-798. doi:10.1115/1.1388616
VIBRATIONS AND FRICTION-INDUCED INSTABILITY IN DISCS
MOTTERSHEAD, J. E. (2001). VIBRATIONS AND FRICTION-INDUCED INSTABILITY IN DISCS. In Series on Stability, Vibration and Control of Systems, Series B (pp. 29-74). WORLD SCIENTIFIC. doi:10.1142/9789812811271_0002
Sensitivity Analysis of the Small Specimen Bulge Test by the Finite Element and the Taguchi Methods
Li, W., Hellen, T. K., Brookfield, D. J., Mottershead, J. E., & Whelan, M. (2001). Sensitivity Analysis of the Small Specimen Bulge Test by the Finite Element and the Taguchi Methods. Journal of Testing and Evaluation, 29(3), 277-284. doi:10.1520/jte12256j
Beat-Frequencies for Damage Detection
Abdel Wahab, M. M., & Mottershead, J. E. (n.d.). Beat-Frequencies for Damage Detection. Key Engineering Materials, 204-205, 211-220. doi:10.4028/www.scientific.net/kem.204-205.211
Inverse Methods in Structural Health Monitoring
Friswell, M. I., & Mottershead, J. E. (n.d.). Inverse Methods in Structural Health Monitoring. Key Engineering Materials, 204-205, 201-210. doi:10.4028/www.scientific.net/kem.204-205.201
Finite–element model updating using experimental test data: parametrization and regularization
Friswell, M. I., Mottershead, J. E., & Ahmadian, H. (2001). Finite–element model updating using experimental test data: parametrization and regularization. Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, 359(1778), 169-186. doi:10.1098/rsta.2000.0719
'Complex and defective zeros in cross receptances'
Mottershead, J. E. (2001). 'Complex and defective zeros in cross receptances'. Journal of Sound and Vibration, 246(1), 791-798.
AN INVERSE METHOD FOR THE ASSIGNMENT OF VIBRATION NODES
MOTTERSHEAD, J. E., MARES, C., & FRISWELL, M. I. (2001). AN INVERSE METHOD FOR THE ASSIGNMENT OF VIBRATION NODES. Mechanical Systems and Signal Processing, 15(1), 87-100. doi:10.1006/mssp.2000.1353
Assignment of the zeros of point and cross receptances
Mottershead, J. E. (2001). Assignment of the zeros of point and cross receptances. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 302-304).
Optimal suppression of parametric vibration in discs under rotating frictional loads
Ouyang, H., & Mottershead, J. E. (2001). Optimal suppression of parametric vibration in discs under rotating frictional loads. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 215(1), 65-75. doi:10.1243/0954406011520526
Special Issue of MECHANICAL SYSTEMS AND SIGNAL PROCESSING on ‘Inverse Methods in Structural Dynamics’
Mottershead, J. E., & Friswell, M. I. (2001). Special Issue of MECHANICAL SYSTEMS AND SIGNAL PROCESSING on ‘Inverse Methods in Structural Dynamics’. Mechanical Systems and Signal Processing, 15(1), 1. doi:10.1006/mssp.2000.1347
Spectra, modes and FRFS of the zeros subsidiary system
Mottershead, J. E. (2001). Spectra, modes and FRFS of the zeros subsidiary system. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 297-301).
Vibration and dynamic instability of moving load systems
Ouyang, H., Mottershead, J. E., & Li, W. (2001). Vibration and dynamic instability of moving load systems. In NOISE AND VIBRATION ENGINEERING, VOLS 1 - 3, PROCEEDINGS (pp. 1355-1360). Retrieved from https://www.webofscience.com/
2000
A systematic approach for physical realization of updated models
Ahmadian, H., Mottershead, J. E., & Friswell, M. I. (2000). A systematic approach for physical realization of updated models. In Proceedings of the 25th International Conference on Noise and Vibration Engineering, ISMA (pp. 637-640).
Selection and updating of parameters for the GARTEUR SM-AG19 testbed
Mares, C., Mottershead, J. E., & Friswell, M. I. (2000). Selection and updating of parameters for the GARTEUR SM-AG19 testbed. In Proceedings of the 25th International Conference on Noise and Vibration Engineering, ISMA (pp. 657-662).
Vibration and dynamic instability of moving load systems
Ouyang, H., Mottershead, J. E., & Li, W. (2000). Vibration and dynamic instability of moving load systems. In Proceedings of the 25th International Conference on Noise and Vibration Engineering, ISMA (pp. 1377-1382).
SELECTION AND UPDATING OF PARAMETERS FOR AN ALUMINIUM SPACE-FRAME MODEL
MOTTERSHEAD, J. E., MARES, C., FRISWELL, M. I., & JAMES, S. (2000). SELECTION AND UPDATING OF PARAMETERS FOR AN ALUMINIUM SPACE-FRAME MODEL. Mechanical Systems and Signal Processing, 14(6), 923-944. doi:10.1006/mssp.2000.1303
Editorial
Friswell, M. I., Mottershead, J. E., & Lees, A. W. (2000). Editorial. Inverse Problems in Engineering, 8(2), i-ii. doi:10.1080/174159700088027721
POLE–ZERO CANCELLATION IN STRUCTURES: REPEATED ROOTS
MOTTERSHEAD, J. E., LI, T., & HE, J. (2000). POLE–ZERO CANCELLATION IN STRUCTURES: REPEATED ROOTS. Journal of Sound and Vibration, 231(1), 219-231. doi:10.1006/jsvi.1999.2714
Editorial
Friswell, M. I., Mottershead, J. E., & Lees, A. W. (2000). Editorial. Inverse Problems in Engineering, 8(1), i-ii. doi:10.1080/174159700088027715
'A methodology for the determination of dynamic instabilities in a car disc brake'
Ouyang, H., Mottershead, J. E., Brookfield, D. J., James, S., & Cartmell, M. P. (2000). 'A methodology for the determination of dynamic instabilities in a car disc brake'. International Journal of Vehicle Design, 23(3/4), 241-262.
Assignment of vibration nodes
Mottershead, J. E., Mares, C., & Friswell, M. I. (2000). Assignment of vibration nodes. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 4062.
Assignment of vibration nodes
Mottershead, J. E., Mares, C., & Friswell, M. I. (2000). Assignment of vibration nodes. Proceedings of the International Modal Analysis Conference - IMAC, 1, 227-233.
Damage location indicators from substructure mode shapes
Ahmadian, H., Mottershead, J. E., & Friswell, M. I. (2000). Damage location indicators from substructure mode shapes. Inverse Problems in Engineering, 8(4), 309-323. doi:10.1080/174159700088027733
Methodology for the determination of dynamic instabilities in a car disc brake
Ouyang, H., Mottershead, J. E., Brookfield, D. J., James, S., & Cartmell, M. P. (2000). Methodology for the determination of dynamic instabilities in a car disc brake. International Journal of Vehicle Design, 23(3), 241-262. doi:10.1504/ijvd.2000.001894
Model updating of an aluminum space-frame using different parameters sets
Mottershead, J. E., Mares, C., Friswell, M. I., & James, S. (2000). Model updating of an aluminum space-frame using different parameters sets. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 4062.
Model updating of an aluminum space-frame using different parameters sets
Mottershead, J. E., Mares, C., Friswell, M. I., & James, S. (2000). Model updating of an aluminum space-frame using different parameters sets. Proceedings of the International Modal Analysis Conference - IMAC, 1, 576-583.
Robust model updating
Friswell, M. I., Mottershead, J. E., & Shenton, T. (2000). Robust model updating. In Proceedings of SPIE - The International Society for Optical Engineering Vol. 4062.
Robust model updating
Friswell, M. I., Mottershead, J. E., & Shenton, T. (2000). Robust model updating. Proceedings of the International Modal Analysis Conference - IMAC, 2, 987-991.
Selection and updating of parameters for an aluminum space-frame model
Mottershead, J. E., Mares, C., Friswell, M. I., & James, S. (2000). Selection and updating of parameters for an aluminum space-frame model. Mechanical Systems and Signal Processing, 14(6), 923-944. doi:10.1006/mssp.2000.1303
1999
A method for determining model-structure errors and for locating damage in vibrating systems
Mottershead, J. E., Friswell, M. I., & Mares, C. (1999). A method for determining model-structure errors and for locating damage in vibrating systems. Meccanica, 34(3), 155-168.
Material properties from small specimens using the punch and bulge test
Brookfield, D. J., Li, W., Rodgers, B., Mottershead, J. E., Hellen, T. K., Jarvis, J., . . . Whelan, M. (1999). Material properties from small specimens using the punch and bulge test. The Journal of Strain Analysis for Engineering Design, 34(6), 423-436. doi:10.1243/0309324991513867
Mottershead, J. E., Friswell, M. I., & Mares, C. (1999). Unknown Title. Meccanica, 34(3), 153-166. doi:10.1023/a:1004684417925
Vibration Nodes, and the Cancellation of Poles and Zeros by Unit-Rank Modifications to Structures
Mottershead, J. E., & Lallement, G. (1999). Vibration Nodes, and the Cancellation of Poles and Zeros by Unit-Rank Modifications to Structures. Journal of Sound and Vibration, 222(5), 833-851. doi:10.1006/jsvi.1998.2103
A Finite Element and Experimental Study of Punch and Bulge Testing
Li, W., Rodgers, B., Brookfield, D. J., Mottershead, J. E., Hellen, T. K., Howard-Hildige, R., . . . Whelan, M. P. (n.d.). A Finite Element and Experimental Study of Punch and Bulge Testing. Key Engineering Materials, 167-168, 55-63. doi:10.4028/www.scientific.net/kem.167-168.55
Damage Location in Beams by Using Rigid-Body Constraints
Mares, C., Mottershead, J. E., & Friswell, M. I. (n.d.). Damage Location in Beams by Using Rigid-Body Constraints. Key Engineering Materials, 167-168, 381-390. doi:10.4028/www.scientific.net/kem.167-168.381
Dynamic Instabilities in a Simple Model of a Car Disc Brake
Ouyang, H., Mottershead, J. E., Brookfield, D. J., James, S., Cartmell, M. P., Kaster, T., . . . Allen, R. (n.d.). Dynamic Instabilities in a Simple Model of a Car Disc Brake. In SAE Technical Paper Series. SAE International. doi:10.4271/1999-01-3409
FINITE ELEMENT CONNECTIVITIES FROM VIBRATION MEASUREMENTS
MOTTERSHEAD, J. E. (1999). FINITE ELEMENT CONNECTIVITIES FROM VIBRATION MEASUREMENTS. Mechanical Systems and Signal Processing, 13(3), 367-374. doi:10.1006/mssp.1998.0196
Frequency response functions and finite element equations with rigid-body constraints, and their application in model updating
Friswell, M. I., & Mottershead, J. E. (1999). Frequency response functions and finite element equations with rigid-body constraints, and their application in model updating. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 654-659).
Friction-induced vibration olf an elastic slider on a vibrating disc
Ouyang, H., Mottershead, J. E., Cartmell, M. P., & Brookfield, D. J. (1999). Friction-induced vibration olf an elastic slider on a vibrating disc. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 41(3), 325-336. doi:10.1016/S0020-7403(98)00059-9
On the natural frequencies and antiresonances of modified structures
Mottershead, J. E. (1999). On the natural frequencies and antiresonances of modified structures. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 648-653).
1998
Finite element connectivities from vibration measurements'
Mottershead, J. E. (1998). Finite element connectivities from vibration measurements'. In Proceedings of the 23rd International Conference on Noise and Vibration Engineering, ISMA (pp. 451-455).
Combining Subset Selection and Parameter Constraints in Model Updating
Friswell, M. I., Mottershead, J. E., & Ahmadian, H. (1998). Combining Subset Selection and Parameter Constraints in Model Updating. Journal of Vibration and Acoustics, 120(4), 854-859. doi:10.1115/1.2893911
Dynamic models of golf clubs
Friswell, M. I., Mottershead, J. E., & M. G. Smart. (1998). Dynamic models of golf clubs. Sports Engineering, 1(1), 41-50. doi:10.1046/j.1460-2687.1998.00001.x
Minimization of the discretization error in mass and stiffness formulations by an inverse method
Ahmadian, H., Friswell, M. I., & Mottershead, J. E. (1998). Minimization of the discretization error in mass and stiffness formulations by an inverse method. International Journal for Numerical Methods in Engineering, 41(2), 371-387. doi:3.0.co;2-r">10.1002/(sici)1097-0207(19980130)41:2<371::aid-nme288>3.0.co;2-r
Friction-induced parametric resonances in discs: Effect of a negative friction-velocity relationship
Ouyang, H., Mottershead, J. E., Cartmell, M. P., & Friswell, M. I. (1998). Friction-induced parametric resonances in discs: Effect of a negative friction-velocity relationship. JOURNAL OF SOUND AND VIBRATION, 209(2), 251-264. doi:10.1006/jsvi.1997.1261
'Friction-induced parametric resonances in discs: Effect of a negative friction-velocity relationship'
Ouyang, H., Mottershead, J. E., Cartmell, M. P., & Friswell, M. I. (1998). 'Friction-induced parametric resonances in discs: Effect of a negative friction-velocity relationship'. Journal of Sound and Vibration, 209(2), 254-264.
Cross validation and `L'-curves for the regularization of ill-conditioned equations in model updating
Mottershead, J. E., Friswell, M. I., & Ahmadian, H. (1998). Cross validation and `L'-curves for the regularization of ill-conditioned equations in model updating. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 2 (pp. 1333-1337).
Dynamics of golf clubs using generic finite element models
Friswell, M. I., Mottershead, J. E., & Smart, M. G. (1998). Dynamics of golf clubs using generic finite element models. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 565-571).
Editorial
Friswell, M. I., & Mottershead, J. E. (1998). Editorial. Journal of Vibration and Control, 4(1), 4. doi:10.1177/107754639800400101
Editorial
Iversen, R., Grane, T., Rose, H. A., Croix, S., Sørensen, L., & Jensen, X. P. (n.d.). Editorial. Danish Journal of Archaeology, 12(1), 1-3. doi:10.7146/dja.v12i1.142363
ON THE ZEROS OF STRUCTURAL FREQUENCY RESPONSE FUNCTIONS AND THEIR SENSITIVITIES
Mottershead, J. E. (1998). ON THE ZEROS OF STRUCTURAL FREQUENCY RESPONSE FUNCTIONS AND THEIR SENSITIVITIES. Mechanical Systems and Signal Processing, 12(5), 591-597. doi:10.1006/mssp.1998.0167
On the zeros of structural frequency response functions and their application to model assessment and updating
Mottershead, J. E. (1998). On the zeros of structural frequency response functions and their application to model assessment and updating. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 500-503).
REGULARISATION METHODS FOR FINITE ELEMENT MODEL UPDATING
Ahmadian, H., Mottershead, J. E., & Friswell, M. I. (1998). REGULARISATION METHODS FOR FINITE ELEMENT MODEL UPDATING. Mechanical Systems and Signal Processing, 12(1), 47-64. doi:10.1006/mssp.1996.0133
Updating parameters for the model of a three storey aluminium space frame
Mottershead, J. E., & James, S. (1998). Updating parameters for the model of a three storey aluminium space frame. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 8-11).
Vibration- and Friction-induced Instability in Disks
Mottershead, J. E. (1998). Vibration- and Friction-induced Instability in Disks. The Shock and Vibration Digest, 30(1), 14-31. doi:10.1177/058310249803000103
1997
Parameterization and identification of a rubber seal
Ahmadian, H., Mottershead, J. E., & Friswell, M. I. (1997). Parameterization and identification of a rubber seal. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 142-146).
Updating finite element models of golf clubs
Friswell, M. I., Smart, M. G., & Mottershead, J. E. (1997). Updating finite element models of golf clubs. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 155-161).
Combining Subset Selection and Parameter Constraints in Model Updating
Friswell, M. I., Mottershead, J. E., & Ahmadian, H. (1997). Combining Subset Selection and Parameter Constraints in Model Updating. In Volume 1B: 16th Biennial Conference on Mechanical Vibration and Noise. American Society of Mechanical Engineers. doi:10.1115/detc97/vib-4147
In-Plane Stick-Slip Vibration on the Surface of a Flexible Disc Clamped Between Elastic Sliders
Ouyang, H., Mottershead, J. E., Cartmell, M. P., & Friswell, M. I. (1997). In-Plane Stick-Slip Vibration on the Surface of a Flexible Disc Clamped Between Elastic Sliders. In Volume 1C: 16th Biennial Conference on Mechanical Vibration and Noise. American Society of Mechanical Engineers. doi:10.1115/detc97/vib-3906
Parametric resonances in an annular disc, with a rotating system of distributed mass and elasticity; And the effects of friction and damping
Mottershead, J. E., Ouyang, H., Cartmell, M. P., & Friswell, M. I. (1997). Parametric resonances in an annular disc, with a rotating system of distributed mass and elasticity; And the effects of friction and damping. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 453(1956), 1-19. doi:10.1098/rspa.1997.0001
1996
On discretization error estimates for finite element model updating
Mottershead, J. E., Friswell, M. I., & Zhang, Y. (1996). On discretization error estimates for finite element model updating. Modal analysis, 11(3-4), 155-164.
'On discretisation error estimates for finite element model updating'
Mottershead, J. E., Friswell, M. I., & Zhang, Y. (1996). 'On discretisation error estimates for finite element model updating'. International Journal of Analytical and Experimental Modal Analysis, 11(3, 4), 155-164.
Finite element analysis of a total knee replacement by using Gauss point contact constraints.
Mottershead, J. E., Edwards, P. D., Whelan, M. P., & English, R. G. (1996). Finite element analysis of a total knee replacement by using Gauss point contact constraints.. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine, 210(1), 51-63. doi:10.1243/pime_proc_1996_210_390_02
Finite element analysis of a total knee replacement by using Gauss point contact constraints.
Jin, Z. M. (1996). Finite element analysis of a total knee replacement by using Gauss point contact constraints.. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine, 210(4), 301-302. doi:10.1243/pime_proc_1996_210_427_02
GEOMETRIC PARAMETERS FOR FINITE ELEMENT MODEL UPDATING OF JOINTS AND CONSTRAINTS
Mottershead, J. E., Friswell, M. I., Ng, G. H. T., & Brandon, J. A. (1996). GEOMETRIC PARAMETERS FOR FINITE ELEMENT MODEL UPDATING OF JOINTS AND CONSTRAINTS. Mechanical Systems and Signal Processing, 10(2), 171-182. doi:10.1006/mssp.1996.0012
1995
Parameterisation of joints and constraints for finite element model updating
Friswell, M. I., Mottershead, J. E., Ng, G. H. T., & Smart, M. G. (1995). Parameterisation of joints and constraints for finite element model updating. In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE Vol. 84.
Parametric vibrations in discs: Point-wise and distributed loads, including rotating friction
Ouyang, H., Chan, S. N., Mottershead, J. E., Friswell, M. I., & Cartmell, M. P. (1995). Parametric vibrations in discs: Point-wise and distributed loads, including rotating friction. In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE Vol. 84 (pp. 1125-1133).
Treatment of systematic errors in model updating
Friswell, M. I., Mottershead, J. E., & Zhang, Y. (1995). Treatment of systematic errors in model updating. In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE Vol. 84.
Parameterisation of Joints and Constraints for Finite Element Model Updating
Friswell, M. I., Mottershead, J. E., Ng, G. H. T., & Smart, M. G. (1995). Parameterisation of Joints and Constraints for Finite Element Model Updating. In Volume 3C: 15th Biennial Conference on Mechanical Vibration and Noise — Vibration Control, Analysis, and Identification (pp. 1163-1170). American Society of Mechanical Engineers. doi:10.1115/detc1995-0691
Parametric Vibrations in Discs: Point-Wise and Distributed Loads, Including Rotating Friction
Ouyang, H., Chan, S. N., Mottershead, J. E., Friswell, M. I., & Cartmell, M. P. (1995). Parametric Vibrations in Discs: Point-Wise and Distributed Loads, Including Rotating Friction. In Volume 3A: 15th Biennial Conference on Mechanical Vibration and Noise — Vibration of Nonlinear, Random, and Time-Varying Systems (pp. 1125-1133). American Society of Mechanical Engineers. doi:10.1115/detc1995-0359
The Treatment of Systematic Errors in Model Updating
Friswell, M. I., Mottershead, J. E., & Zhang, Y. (1995). The Treatment of Systematic Errors in Model Updating. In Volume 3C: 15th Biennial Conference on Mechanical Vibration and Noise — Vibration Control, Analysis, and Identification (pp. 1103-1110). American Society of Mechanical Engineers. doi:10.1115/detc1995-0684
Modelling an orthopaedic knee prosthesis as a layered elastic system part 2: Finite element analysis
Whelan, M. P., Mottershead, J. E., Edwards, P. D., & Little, E. G. (1995). Modelling an orthopaedic knee prosthesis as a layered elastic system part 2: Finite element analysis. The Journal of Strain Analysis for Engineering Design, 30(3), 195-203. doi:10.1243/03093247v303195
Instabilities at Subcritical Speeds in Discs With Rotating Frictional Follower Loads
Chan, S. N., Mottershead, J. E., & Cartmell, M. P. (1995). Instabilities at Subcritical Speeds in Discs With Rotating Frictional Follower Loads. Journal of Vibration and Acoustics, 117(2), 240-242. doi:10.1115/1.2873936
Comparing Numerical Data with Test Results
Friswell, M. I., & Mottershead, J. E. (1995). Comparing Numerical Data with Test Results. In Solid Mechanics and its Applications (pp. 56-77). Springer Netherlands. doi:10.1007/978-94-015-8508-8_4
Direct Methods using Modal Data
Friswell, M. I., & Mottershead, J. E. (1995). Direct Methods using Modal Data. In Solid Mechanics and its Applications (pp. 126-157). Springer Netherlands. doi:10.1007/978-94-015-8508-8_7
Discussion and Recommendations
Friswell, M. I., & Mottershead, J. E. (1995). Discussion and Recommendations. In Solid Mechanics and its Applications (pp. 279-282). Springer Netherlands. doi:10.1007/978-94-015-8508-8_11
Estimation Techniques
Friswell, M. I., & Mottershead, J. E. (1995). Estimation Techniques. In Solid Mechanics and its Applications (pp. 78-97). Springer Netherlands. doi:10.1007/978-94-015-8508-8_5
Finite Element Model Updating in Structural Dynamics
Friswell, M. I., & Mottershead, J. E. (1995). Finite Element Model Updating in Structural Dynamics. Dordrecht: Kluwer Academic Publishers.
Finite Element Modelling
Friswell, M. I., & Mottershead, J. E. (1995). Finite Element Modelling. In Solid Mechanics and its Applications (pp. 7-35). Springer Netherlands. doi:10.1007/978-94-015-8508-8_2
Flutter Instability of Circular Discs with Frictional Follower Loads
Mottershead, J. E., & Chan, S. N. (1995). Flutter Instability of Circular Discs with Frictional Follower Loads. Journal of Vibration and Acoustics, 117(1), 161-163. doi:10.1115/1.2873860
Introduction
Friswell, M. I., & Mottershead, J. E. (1995). Introduction. In Solid Mechanics and its Applications (pp. 1-6). Springer Netherlands. doi:10.1007/978-94-015-8508-8_1
Iterative Methods using Modal Data
Friswell, M. I., & Mottershead, J. E. (1995). Iterative Methods using Modal Data. In Solid Mechanics and its Applications (pp. 158-227). Springer Netherlands. doi:10.1007/978-94-015-8508-8_8
Methods using Frequency Domain Data
Friswell, M. I., & Mottershead, J. E. (1995). Methods using Frequency Domain Data. In Solid Mechanics and its Applications (pp. 228-256). Springer Netherlands. doi:10.1007/978-94-015-8508-8_9
On the treatment of discretisation errors in finite element model updating
Mottershead, J. E., Goh, E. L., & Shao, W. (1995). On the treatment of discretisation errors in finite element model updating. Mechanical Systems and Signal Processing, 9(1), 101-112. doi:10.1006/mssp.1995.0008
Parameters for Model Updating
Friswell, M. I., & Mottershead, J. E. (1995). Parameters for Model Updating. In Solid Mechanics and its Applications (pp. 98-125). Springer Netherlands. doi:10.1007/978-94-015-8508-8_6
Vibration Testing
Friswell, M. I., & Mottershead, J. E. (1995). Vibration Testing. In Solid Mechanics and its Applications (pp. 36-55). Springer Netherlands. doi:10.1007/978-94-015-8508-8_3
1994
Parametric Resonances at Subcritical Speeds in Discs with Rotating Frictional Loads
Chan, S. N., Mottershead, J. E., & Cartmell, M. P. (1994). Parametric Resonances at Subcritical Speeds in Discs with Rotating Frictional Loads. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 208(6), 417-425. doi:10.1243/pime_proc_1994_208_147_02
1993
Model Updating In Structural Dynamics: A Survey
Mottershead, J. E., & Friswell, M. I. (1993). Model Updating In Structural Dynamics: A Survey. Journal of Sound and Vibration, 167(2), 347-375. doi:10.1006/jsvi.1993.1340
Correction of Joint Stiffnesses and Constraints for Finite Element Models in Structural Dynamics
Mottershead, J. E., & Weixun, S. (1993). Correction of Joint Stiffnesses and Constraints for Finite Element Models in Structural Dynamics. Journal of Applied Mechanics, 60(1), 117-122. doi:10.1115/1.2900733
1992
Brake squeal - an analysis of symmetry and flutter instability
Mottershead, J. E., & Chan, S. N. (1992). Brake squeal - an analysis of symmetry and flutter instability. In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE Vol. 49 (pp. 87-97).
A general finite element approach for contact stress analysis
Mottershead, J. E., Pascoe, S. K., & English, R. G. (1992). A general finite element approach for contact stress analysis. International Journal for Numerical Methods in Engineering, 33(4), 765-779. doi:10.1002/nme.1620330407
1991
On the Optimal Correction of Structural Dynamic Models
Mottershead, J. E. (1991). On the Optimal Correction of Structural Dynamic Models. In 13th Biennial Conference on Mechanical Vibration and Noise: Modal Analysis, Modeling, Diagnostics, and Control — Analytical and Experimental (pp. 107-112). American Society of Mechanical Engineers. doi:10.1115/detc1991-0368
Methods and application of spatial parameter estimation from measured vibration data
Mottershead, J. E., & Weixun, S. (1991). Methods and application of spatial parameter estimation from measured vibration data. In Proceedings of the International Modal Analysis Conference - IMAC Vol. 1 (pp. 789-795).
On the optimal correction of structural dynamic models
Mottershead, J. E. (1991). On the optimal correction of structural dynamic models. In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE Vol. 38 (pp. 107-112).
On the treatment of ill-conditioning in spatial parameter estimation from measured vibration data
Mottershead, J. E., & Foster, C. D. (1991). On the treatment of ill-conditioning in spatial parameter estimation from measured vibration data. Mechanical Systems and Signal Processing, 5(2), 139-154. doi:10.1016/0888-3270(91)90020-6
1990
A method for improving finite element models by using experimental data: Application and implications for vibration monitoring
Foster, C. D., & Mottershead, J. E. (1990). A method for improving finite element models by using experimental data: Application and implications for vibration monitoring. International Journal of Mechanical Sciences, 32(3), 191-203. doi:10.1016/0020-7403(90)90015-b
An Experiment to Identify the Structural Dynamics of a Portal Frame
Mottershead, J. E., Tee, T. K., Foster, C. D., & Stanway, R. (1990). An Experiment to Identify the Structural Dynamics of a Portal Frame. Journal of Vibration and Acoustics, 112(1), 78-83. doi:10.1115/1.2930102
Editorial
Mottershead, J. E. (1990). Editorial. International Journal of Mechanical Sciences, 32(3), 167. doi:10.1016/0020-7403(90)90012-8
Theory for the Estimation of Structural Vibration Parameters from Incomplete Data
Mottenhead, J. E. (1990). Theory for the Estimation of Structural Vibration Parameters from Incomplete Data. AIAA Journal, 28(7), 1326-1328. doi:10.2514/3.48888
Theory for the estimation of structural vibration parameters from incomplete data
Mottershead, J. E. (1990). Theory for the estimation of structural vibration parameters from incomplete data. AIAA Journal, 28(3), 559-561. doi:10.2514/3.10429
1989
Identification of squeeze-film bearing dynamics using a recursive, frequency-domain filter
Stanway, R., Tee, T. K., & Mottershead, J. E. (1989). Identification of squeeze-film bearing dynamics using a recursive, frequency-domain filter. In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE Vol. 18-2 (pp. 167-176).
'Experimental techniques for modelling non-linear stiffness and damping characteristics'
Stanway, R., & Mottershead, J. E. (1989). 'Experimental techniques for modelling non-linear stiffness and damping characteristics'. International Journal of Analytical and Experimental Modal Analysis, 4(3), 89-92.
A Comparison of Finite Element Techniques for Contact Stress Analysis
PASCOE, S. K., MOTTERSHEAD, J. E., & HELLEN, T. K. (1989). A Comparison of Finite Element Techniques for Contact Stress Analysis. In Modern Practice in Stress and Vibration Analysis (pp. 299-312). Elsevier. doi:10.1016/b978-0-08-037522-9.50036-2
Estimation of mass, damping and stiffness parameters in mechanical vibrating structures
Stanway, R., Mottershead, J. E., & Tee, T. K. (1989). Estimation of mass, damping and stiffness parameters in mechanical vibrating structures. Transactions of the Institute of Measurement and Control, 11(5), 249-255. doi:10.1177/014233128901100504
FOREWORD
Mottershead, J. E. (1989). FOREWORD. In Modern Practice in Stress and Vibration Analysis (pp. xi). Elsevier. doi:10.1016/b978-0-08-037522-9.50005-2
Parameter Estimation Techniques for Monitoring Machines and Structures
FOSTER, C. D., & MOTTERSHEAD, J. E. (1989). Parameter Estimation Techniques for Monitoring Machines and Structures. In Modern Practice in Stress and Vibration Analysis (pp. 109-124). Elsevier. doi:10.1016/b978-0-08-037522-9.50017-9
Two new finite element contact algorithms
Pascoe, S. K., & Mottershead, J. E. (1989). Two new finite element contact algorithms. Computers & Structures, 32(1), 137-144. doi:10.1016/0045-7949(89)90078-3
Vibratory Bowl Feeder Design using Numerical Modelling Techniques
MORREY, D., & MOTTERSHEAD, J. E. (1989). Vibratory Bowl Feeder Design using Numerical Modelling Techniques. In Modern Practice in Stress and Vibration Analysis (pp. 211-217). Elsevier. doi:10.1016/b978-0-08-037522-9.50027-1
1988
A Unified Theory of Recursive, Frequency Domain Filters With Application to System Identification in Structural Dynamics
Mottershead, J. E. (1988). A Unified Theory of Recursive, Frequency Domain Filters With Application to System Identification in Structural Dynamics. Journal of Vibration and Acoustics, 110(3), 360-365. doi:10.1115/1.3269526
Nonlinear Identification of a Squeeze-Film Damper
Stanway, R., Mottershead, J. E., & Firoozian, R. (1988). Nonlinear Identification of a Squeeze-Film Damper. Journal of Tribology, 110(3), 486-491. doi:10.1115/1.3261654
'Identification of a positive definite mass matrix'
Mottershead, J. E., Tee, T. K., & Lees, A. W. (1988). 'Identification of a positive definite mass matrix'. Transactions of the American Society of Mechanical Engineers, Journal of Vibration, Acoustics, Stress and Reliability in Design, 110(1), 48-52.
An instrumental variable method for the estimation of mass, stiffness and damping parameters from measured frequency response functions
Mottershead, J. E., & Foster, C. D. (1988). An instrumental variable method for the estimation of mass, stiffness and damping parameters from measured frequency response functions. Mechanical Systems and Signal Processing, 2(4), 379-390. doi:10.1016/0888-3270(88)90061-1
Geometric stiffness of thin‐walled open section beams using a semiloof beam formulation
Mottershead, J. E. (1988). Geometric stiffness of thin‐walled open section beams using a semiloof beam formulation. International Journal for Numerical Methods in Engineering, 26(10), 2267-2278. doi:10.1002/nme.1620261010
Identification of a Positive Definite Mass Matrix
Mottershead, J. E., Tee, T. K., & Lees, A. W. (1988). Identification of a Positive Definite Mass Matrix. Journal of Vibration and Acoustics, 110(1), 49-52. doi:10.1115/1.3269479
Linear elastic contact problems using curved elements and including dynamic friction
Pascoe, S. K., & Mottershead, J. E. (1988). Linear elastic contact problems using curved elements and including dynamic friction. International Journal for Numerical Methods in Engineering, 26(7), 1631-1643. doi:10.1002/nme.1620260712
Warping torsion in thin‐walled open section beams using the semiloof beam element
Mottershead, J. E. (1988). Warping torsion in thin‐walled open section beams using the semiloof beam element. International Journal for Numerical Methods in Engineering, 26(1), 231-243. doi:10.1002/nme.1620260116
1987
A Linear, Frequency Domain Filter for Parameter Identification of Vibrating Structures
Mottershead, J. E., Lees, A. W., & Stanway, R. (1987). A Linear, Frequency Domain Filter for Parameter Identification of Vibrating Structures. Journal of Vibration and Acoustics, 109(3), 262-269. doi:10.1115/1.3269430
Estimation of the Linearized Damping Coefficients of a Squeeze-Film Vibration Isolator
Stanway, R., Firoozian, R., & Mottershead, J. E. (1987). Estimation of the Linearized Damping Coefficients of a Squeeze-Film Vibration Isolator. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 201(3), 181-191. doi:10.1243/pime_proc_1987_201_105_02
Identification of fluid-film bearing dynamics: time-domain or frequency-domain?
Mottershead, J. E., Firoozian, R., & Stanway, R. (1987). Identification of fluid-film bearing dynamics: time-domain or frequency-domain?. Unknown Journal, ((eds.), Amsterdam, The Netherlands, Elsevier Sci. Publishers B.V., 1987, Session XI, Paper XI(i)).
Paper XI(i) Identification of fluid-film bearing dynamics: time-domain or frequency-domain?
Mottershead, J., Firoozian, R., & Stanway, R. (1987). Paper XI(i) Identification of fluid-film bearing dynamics: time-domain or frequency-domain?. Unknown Journal, 339-346. doi:10.1016/s0167-8922(08)70962-3
1986
Identification of nth-power velocity damping
Mottershead, J. E., & Stanway, R. (1986). Identification of nth-power velocity damping. Journal of Sound and Vibration, 105(2), 309-319. doi:10.1016/0022-460x(86)90159-8
Identification of combined viscous and Coulomb friction - a numerical comparison of least-squares algorithms
Stanway, R., & Mottershead, J. E. (1986). Identification of combined viscous and Coulomb friction - a numerical comparison of least-squares algorithms. Transactions of the Institute of Measurement and Control, 8(1), 9-16. doi:10.1177/014233128600800102
Identification of structural vibration parameters by using a frequency domain filter
Mottershead, J. E., & Stanway, R. (1986). Identification of structural vibration parameters by using a frequency domain filter. Journal of Sound and Vibration, 109(3), 495-506. doi:10.1016/s0022-460x(86)80385-6
Modelling of Vibratory Bowl Feeders
Morrey, D., & Mottershead, J. E. (1986). Modelling of Vibratory Bowl Feeders. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 200(6), 431-437. doi:10.1243/pime_proc_1986_200_152_02
1985
NON-LINEAR MODELS OF EV FLUIDS IN VIBRATION.
Stanway, R., Stevens, N. G., & Mottershead, J. E. (1985). NON-LINEAR MODELS OF EV FLUIDS IN VIBRATION.. In IEE Colloquium (Digest).
1982
Finite elements and related areas of computer-aided engineering
Mottershead, J. E., Chan, B. T. F., & Kellman, M. P. (1982). Finite elements and related areas of computer-aided engineering. Materials & Design, 3(4), 495-501. doi:10.1016/0261-3069(82)90159-5
The large displacements and dynamic stability of springs using helical finite elements
Mottershead, J. E. (1982). The large displacements and dynamic stability of springs using helical finite elements. International Journal of Mechanical Sciences, 24(9), 547-558. doi:10.1016/0020-7403(82)90047-9
1980
'Finite elements for dynamical analysis of helical rods'
Mottershead, J. E. (1980). 'Finite elements for dynamical analysis of helical rods'. International Journal of Mechanical Sciences, 22(5), 269-284.
Finite elements for dynamical analysis of helical rods
Mottershead, J. E. (1980). Finite elements for dynamical analysis of helical rods. International Journal of Mechanical Sciences, 22(5), 267-283. doi:10.1016/0020-7403(80)90028-4
Undated
Image analysis of full-field vibration and strain data
Mottershead, J., & Wang, W. (n.d.). Image analysis of full-field vibration and strain data. Cambridge, UK.