Publications
Selected publications
- Developing advanced techniques to reclaim existing end of service life (EoSL) bricks – An assessment of reuse technical viability (Journal article - 2020)
- Physical model tests and numerical simulation for assessing the stability of brick-lined tunnels (Journal article - 2016)
- Links between circular economy and climate change mitigation in the built environment (Journal article - 2020)
- Spatiotemporal model to quantify stocks of building structural products for a prospective circular economy (Journal article - 2020)
- Mesoscale modelling of concrete under high strain rate tension with a rate-dependent cohesive interface approach (Journal article - 2020)
- Mesoscopic investigation of size effect in notched concrete beams: The role of fracture process zone (Journal article - 2019)
2024
Investigation into the impact of using date palm fibre for thermal insulation in residential buildings in Jeddah
Alhabashi, W., Chow, D., & Chen, H. M. (n.d.). Investigation into the impact of using date palm fibre for thermal insulation in residential buildings in Jeddah. In the 1st International Conference of Net Zero Carbon Built Environment (ZCBE). Nottingham, UK.
Reinterpreting the Dougong joint: a systematic review of robotic technologies for the assembly of timber joinery
Zhao, J., Agkathidis, A., Lombardi, D., & Chen, H. (n.d.). Reinterpreting the Dougong joint: a systematic review of robotic technologies for the assembly of timber joinery. Architectural Science Review, 1-15. doi:10.1080/00038628.2024.2339995
Rethinking Bamboo Roof-Based Architecture of Indonesian Traditional House Using Parametric Design and Automated Fabrication Techniques
Mansuri, A., Agkathidis, A., Lombardi, D., & Chen, H. (2024). Rethinking Bamboo Roof-Based Architecture of Indonesian Traditional House Using Parametric Design and Automated Fabrication Techniques. In eCAADe proceedings Vol. 1 (pp. 203-212). eCAADe. doi:10.52842/conf.ecaade.2024.1.203
The Application of Robotic Fabrication in Reinterpreting Traditional Chinese Joinery
Zhao, J., Agkathidis, A., Lombardi, D., & Chen, H. (2024). The Application of Robotic Fabrication in Reinterpreting Traditional Chinese Joinery. In eCAADe proceedings Vol. 1 (pp. 95-104). eCAADe. doi:10.52842/conf.ecaade.2024.1.095
2023
Rethinking traditional Indonesian bamboo-frame structures by utilizing parametric tools and automated fabrication techniques: a systematic review
Mansuri, A., Agkathidis, A., Lombardi, D., & Chen, H. (2023). Rethinking traditional Indonesian bamboo-frame structures by utilizing parametric tools and automated fabrication techniques: a systematic review.
Industry Symbiosis and Waste Glass Upgrading: A Feasibility Study in Liverpool towards Circular Economy
Chen, H., Zhou, R., & Wang, T. (2023). Industry Symbiosis and Waste Glass Upgrading: A Feasibility Study in Liverpool towards Circular Economy. International Journal of Engineering Management and Economics.
Integration of building information modeling and project management in construction project life cycle
Wang, T., & Chen, H. -M. (2023). Integration of building information modeling and project management in construction project life cycle. AUTOMATION IN CONSTRUCTION, 150. doi:10.1016/j.autcon.2023.104832
Robotic 3D printing of concrete building components for residential buildings in Saudi Arabia
Alabbasi, M., Agkathidis, A., & Chen, H. (2023). Robotic 3D printing of concrete building components for residential buildings in Saudi Arabia. AUTOMATION IN CONSTRUCTION, 148. doi:10.1016/j.autcon.2023.104751
A Computational Framework for Parametric Design and Robotic Fabrication of the Dougong joint
Zhao, J., Agkathidis, A., Lombardi, D., & Chen, H. (2023). A Computational Framework for Parametric Design and Robotic Fabrication of the Dougong joint. In eCAADe proceedings Vol. 1 (pp. 313-322). eCAADe. doi:10.52842/conf.ecaade.2023.1.313
2022
Reinterpreting the Dougong joint by using parametric design methods and robotic fabrication technologies: a critical review
Zhao, J., Lombardi, D., Chen, H., & Agkathidis, A. (2022). Reinterpreting the Dougong joint by using parametric design methods and robotic fabrication technologies: a critical review. In eCAADe 2022. Ghent.
Reclaiming structural steels from the end of service life composite structures for reuse - An assessment of the viability of different methods
Chen, H. -M., Wang, Y., Zhou, K., Lam, D., Guo, W., Li, L., . . . Hopkinson, P. (2022). Reclaiming structural steels from the end of service life composite structures for reuse - An assessment of the viability of different methods. DEVELOPMENTS IN THE BUILT ENVIRONMENT, 10. doi:10.1016/j.dibe.2022.100077
Mesoscopic investigation of the dynamic tensile behaviour of concrete from spalling test and implication on interpretation of test data
Zhou, R., Lu, Y., Chen, H. -M., & Wang, W. (2022). Mesoscopic investigation of the dynamic tensile behaviour of concrete from spalling test and implication on interpretation of test data. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 162. doi:10.1016/j.ijimpeng.2021.104139
2021
Study on thermal conductivity model of saline soil based on particle morphology
Qiu, E., Zhong, C., Wan, X., Lu, J., Chen, H. M., Pirhadi, N., . . . Chen, Q. (2021). Study on thermal conductivity model of saline soil based on particle morphology. HEAT AND MASS TRANSFER, 57(12), 2029-2043. doi:10.1007/s00231-021-03089-8
Estimation of structural steel and concrete stocks and flows at urban scale–towards a prospective circular economy
Ajayebi, A., Hopkinson, P., Zhou, K., Lam, D., Chen, H. -M., & Wang, Y. (2021). Estimation of structural steel and concrete stocks and flows at urban scale–towards a prospective circular economy. Resources, Conservation and Recycling, 174, 105821. doi:10.1016/j.resconrec.2021.105821
Multiscale digital twin for particle breakage in milling: From nanoindentation to population balance model
Wang, L. G., Ge, R., Chen, X., Zhou, R., & Chen, H. -M. (2021). Multiscale digital twin for particle breakage in milling: From nanoindentation to population balance model. Powder Technology, 386, 247-261. doi:10.1016/j.powtec.2021.03.005
Mesoscale modelling of size effect on the evolution of fracture process zone in concrete
Zhou, R., Lu, Y., Wang, L. -G., & Chen, H. -M. (2021). Mesoscale modelling of size effect on the evolution of fracture process zone in concrete. ENGINEERING FRACTURE MECHANICS, 245. doi:10.1016/j.engfracmech.2021.107559
Assessing the effectivity of additive manufacturing techniques for the production of building components: Innovation for housing construction in Saudi Arabia
Alabbasi, M., Chen, H., & Agkathidis, A. (2021). Assessing the effectivity of additive manufacturing techniques for the production of building components: Innovation for housing construction in Saudi Arabia. In ASCAAD 2021. Cairo.
Developing a design framework for the 3D printing production of concrete building components: A case study on column optimisation for efficient housing solutions for Saudi Arabia
Alabbasi, M., Chen, H., & Agkathidis, A. (2021). Developing a design framework for the 3D printing production of concrete building components: A case study on column optimisation for efficient housing solutions for Saudi Arabia. In ASCAAD 2021. Cairo.
Developing a design framework for the production of concrete building components: A case study on column optimisation for efficient housing solutions for Saudi Arabia
Alabbasi, M., Chen, H., & Agkathidis, A. (n.d.). Developing a design framework for the production of concrete building components: A case study on column optimisation for efficient housing solutions for Saudi Arabia. Architectural Science Review.
Reinterpretation of the Dougong Joint by the use of Parametric Tools and Robotic Fabrication Techniques
Zhao, J., Lombardi, D., Chen, H., & Agkathidis, A. (2021). Reinterpretation of the Dougong Joint by the use of Parametric Tools and Robotic Fabrication Techniques. In eCAADe proceedings Vol. 2 (pp. 233-242). eCAADe. doi:10.52842/conf.ecaade.2021.2.233
2020
Spatiotemporal model to quantify stocks of building structural products for a prospective circular economy
Ajayebi, A., Hopkinson, P., Zhou, K., Lam, D., Chen, H. -M., & Wang, Y. (2020). Spatiotemporal model to quantify stocks of building structural products for a prospective circular economy. Resources, Conservation and Recycling, 162. doi:10.1016/j.resconrec.2020.105026
Links between circular economy and climate change mitigation in the built environment
Gallego-Schmid, A., Chen, H. -M., Sharmina, M., & Mendoza, J. M. F. (2020). Links between circular economy and climate change mitigation in the built environment. JOURNAL OF CLEANER PRODUCTION, 260. doi:10.1016/j.jclepro.2020.121115
Developing advanced techniques to reclaim existing end of service life (EoSL) bricks – An assessment of reuse technical viability
Zhou, K., Chen, H. -M., Wang, Y., Lam, D., Ajayebi, A., & Hopkinson, P. (2020). Developing advanced techniques to reclaim existing end of service life (EoSL) bricks - An assessment of reuse technical viability. DEVELOPMENTS IN THE BUILT ENVIRONMENT, 2. doi:10.1016/j.dibe.2020.100006
Mesoscale modelling of concrete under high strain rate tension with a rate-dependent cohesive interface approach
Zhou, R., Chen, H. -M., & Lu, Y. (2020). Mesoscale modelling of concrete under high strain rate tension with a rate-dependent cohesive interface approach. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 139. doi:10.1016/j.ijimpeng.2020.103500
Numerical Prediction and Corresponding Circular Economy Approaches for Resource Optimisation and Recovery of Underground Structures
Chen, H. -M., Zhou, R., & Ulianov, C. (2020). Numerical Prediction and Corresponding Circular Economy Approaches for Resource Optimisation and Recovery of Underground Structures. URBAN RAIL TRANSIT, 6(1), 71-83. doi:10.1007/s40864-019-00124-0
Development and clinical deployment of a smartphone-based visual field deep learning system for glaucoma detection.
Li, F., Song, D., Chen, H., Xiong, J., Li, X., Zhong, H., . . . Ting, D. S. W. (2020). Development and clinical deployment of a smartphone-based visual field deep learning system for glaucoma detection.. NPJ digital medicine, 3, 123. doi:10.1038/s41746-020-00329-9
2019
Mesoscopic investigation of size effect in notched concrete beams: The role of fracture process zone
Zhou, R., & Chen, H. -M. (2019). Mesoscopic investigation of size effect in notched concrete beams: The role of fracture process zone. ENGINEERING FRACTURE MECHANICS, 212, 136-152. doi:10.1016/j.engfracmech.2019.03.028
Recovery and reuse of structural products from end-of-life buildings
Hopkinson, P., Chen, H. -M., Zhou, K., Wang, Y., & Lam, D. (2019). Recovery and reuse of structural products from end-of-life buildings. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENGINEERING SUSTAINABILITY, 172(3), 119-128. doi:10.1680/jensu.18.00007
REBUILD: Regenerative Buildings and Construction systems for a Circular Economy
Ajayabi, A., Chen, H. -M., Zhou, K., Hopkinson, P., Wang, Y., & Lam, D. (n.d.). REBUILD: Regenerative Buildings and Construction systems for a Circular Economy. In IOP Conference Series: Earth and Environmental Science Vol. 225 (pp. 012015). IOP Publishing. doi:10.1088/1755-1315/225/1/012015
2018
Study on the splitting failure of the surrounding rock of underground caverns
Li, X., Chen, H. -M., Sun, Y., Zhou, R., & Wang, L. (2018). Study on the splitting failure of the surrounding rock of underground caverns. GEOMECHANICS AND ENGINEERING, 14(5), 499-507. doi:10.12989/gae.2018.14.5.499
2016
Physical model tests and numerical simulation for assessing the stability of brick-lined tunnels
Chen, H. -M., Yu, H. -S., & Smith, M. J. (2016). Physical model tests and numerical simulation for assessing the stability of brick-lined tunnels. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 53, 109-119. doi:10.1016/j.tust.2016.01.016
2015
3D LASER SCANNING TECHNIQUE FOR THE INSPECTION AND MONITORING OF RAILWAY TUNNELS
Chen, H. -M., Ulianov, C., & Shaltout, R. (2015). 3D LASER SCANNING TECHNIQUE FOR THE INSPECTION AND MONITORING OF RAILWAY TUNNELS. TRANSPORT PROBLEMS, 10, 73-84. doi:10.21307/tp-2015-063
A Holistic Design Approach using Advanced Computing Tools for Railway Track Modelling
Chen, H. -M., Ulianov, C., & Shaltout, R. E. (2015, September 1). A Holistic Design Approach using Advanced Computing Tools for Railway Track Modelling. In Civil-Comp Proceedings. Civil-Comp Press. doi:10.4203/ccp.108.197
Coupled Numerical Modelling of Railway Track Substructure with Vehicle-Track Interaction
Shaltout, R. E., Ulianov, C., & Chen, H. -M. (2015, September 1). Coupled Numerical Modelling of Railway Track Substructure with Vehicle-Track Interaction. In Civil-Comp Proceedings. Civil-Comp Press. doi:10.4203/ccp.108.125
2014
Monitoring deformation of small scale model tunnels under load testing
Chen, H. -M., Smith, M., Yu, H. -S., & Kokkas, N. (2014). Monitoring deformation of small scale model tunnels under load testing. SURVEY REVIEW, 46(339), 417-425. doi:10.1179/1752270614Y.0000000122
Physical model tests and numerical simulation for assessing the stability of tunnels
Chen, H. (2014, July 10). Physical model tests and numerical simulation for assessing the stability of tunnels.
2011
ADVANCED MONITORING AND NUMERICAL TECHNIQUES FOR ASSESSING THE STABILITY OF TUNNELS
Chen, H. -M., Yu, H. -S., & Smith, M. (2011). ADVANCED MONITORING AND NUMERICAL TECHNIQUES FOR ASSESSING THE STABILITY OF TUNNELS. In PARTICLE-BASED METHODS II: FUNDAMENTALS AND APPLICATIONS (pp. 538-549). Retrieved from https://www.webofscience.com/