Publications
2024
Flanking transmission from structure-borne sound sources in heavyweight buildings over multiple junctions
HOPKINS, C. (2024). Flanking transmission from structure-borne sound sources in heavyweight buildings over multiple junctions. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings Vol. 270 (pp. 970-978). Institute of Noise Control Engineering (INCE). doi:10.3397/in_2024_2717
SOUND POWER OF NORMAL SPEECH FOR BUILDING ACOUSTICS
HOPKINS, C., GRAETZER, S., & SEIFFERT, G. (2024, September 12). SOUND POWER OF NORMAL SPEECH FOR BUILDING ACOUSTICS. In Acoustics 2024. Institute of Acoustics. doi:10.25144/23650
ESTIMATION OF AIRBORNE AND IMPACT SOUND INSULATION BETWEEN ADJACENT AND NON-ADJACENT ROOMS USING SEA PATH ANALYSIS
Hopkins, C. (2024). ESTIMATION OF AIRBORNE AND IMPACT SOUND INSULATION BETWEEN ADJACENT AND NON-ADJACENT ROOMS USING SEA PATH ANALYSIS. In Proceedings of the International Congress on Sound and Vibration.
2023
Assessing the low-frequency measurement procedure for the measurement of impact sound insulation using the rubber ball
Hirakawa, S., & Hopkins, C. (2023). Assessing the low-frequency measurement procedure for the measurement of impact sound insulation using the rubber ball. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings Vol. 268 (pp. 492-501). Institute of Noise Control Engineering (INCE). doi:10.3397/in_2023_0086
Assessing the potential to use structure-borne sound to detect survivors in collapsed buildings
Hopkins, C., & Filippoupolitis, M. (2023). Assessing the potential to use structure-borne sound to detect survivors in collapsed buildings. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings Vol. 268 (pp. 270-281). Institute of Noise Control Engineering (INCE). doi:10.3397/in_2023_0055
Perception and learning of relative pitch by musicians using the vibrotactile mode
Hopkins, C., Mate-Cid, S., Fulford, R., Seiffert, G., & Ginsborg, J. (2023). Perception and learning of relative pitch by musicians using the vibrotactile mode. MUSICAE SCIENTIAE, 27(1), 3-26. doi:10.1177/10298649211015278
Vibration transmission across seismically damaged beam-to-column junctions of reinforced concrete using Statistical Energy Analysis
Fillipoupolitis, M., & Hopkins, C. (2023). Vibration transmission across seismically damaged beam-to-column junctions of reinforced concrete using Statistical Energy Analysis. Vibration. doi:10.3390/vibration6010011
Characterisation of time-varying structure-borne sound sources using a reception plate to predict maximum Fast time-weighted levels in heavyweight buildings
Reinhold, S., & Hopkins, C. (2023). Characterisation of time-varying structure-borne sound sources using a reception plate to predict maximum Fast time-weighted levels in heavyweight buildings. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings Vol. 265 (pp. 943-952). Institute of Noise Control Engineering (INCE). doi:10.3397/in_2022_0135
Low-frequency vibration of a timber joist floor section connected by metal screws: experimental validation of FEM models
Shen, X., & Hopkins, C. (2023). Low-frequency vibration of a timber joist floor section connected by metal screws: experimental validation of FEM models. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings Vol. 265 (pp. 2362-2372). Institute of Noise Control Engineering (INCE). doi:10.3397/in_2022_0337
VERIFICATION PROCEDURES FOR THE IMPACT FORCE APPLIED BY THE RUBBER BALL USED FOR IMPACT SOUND INSULATION MEASUREMENTS
Hirakawa, S., & Hopkins, C. (2023). VERIFICATION PROCEDURES FOR THE IMPACT FORCE APPLIED BY THE RUBBER BALL USED FOR IMPACT SOUND INSULATION MEASUREMENTS. In Proceedings of the International Congress on Sound and Vibration.
2022
Comparison of ideal mask-based speech enhancement algorithms for speech mixed with white noise at low mixture signal-to-noise ratios
Graetzer, S., & Hopkins, C. (2022). Comparison of ideal mask-based speech enhancement algorithms for speech mixed with white noise at low mixture signal-to-noise ratios. The Journal of the Acoustical Society of America, 152(6), 3458-3470. doi:10.1121/10.0016494
Engineering design for sound insulation in buildings
Hopkins, C. (2022). Engineering design for sound insulation in buildings. In DAGA. Stuttgart, Germany.
Deafness And Music: Can Vibration Be Used When Playing Music Together?
Hopkins, C., Maté-Cid, S., Fulford, R., Seiffert, G., Ginsborg, J., & Barker, N. (n.d.). Deafness And Music: Can Vibration Be Used When Playing Music Together?. Frontiers for Young Minds, 9. doi:10.3389/frym.2021.732713
Experimental and numerical validation of Advanced Statistical Energy Analysis to incorporate tunneling mechanisms for vibration transmission across a grillage of beams
Wang, X., & Hopkins, C. (2022). Experimental and numerical validation of Advanced Statistical Energy Analysis to incorporate tunneling mechanisms for vibration transmission across a grillage of beams. ACTA ACUSTICA, 6. doi:10.1051/aacus/2022046
2021
Experimental Validation of Finite Element Models for Reinforced Concrete Beams with Discontinuities That Form Dowel-Type Joints
Filippoupolitis, M., & Hopkins, C. (n.d.). Experimental Validation of Finite Element Models for Reinforced Concrete Beams with Discontinuities That Form Dowel-Type Joints. Vibration, 4(3), 537-550. doi:10.3390/vibration4030032
Using Inverse Transient Statistical Energy Analysis to determine the transient power input from a heavy impact on floating floors
Hirakawa, S., & Hopkins, C. (2021). Using Inverse Transient Statistical Energy Analysis to determine the transient power input from a heavy impact on floating floors. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings Vol. 263 (pp. 2270-2278). Institute of Noise Control Engineering (INCE). doi:10.3397/in-2021-2088
Vibration transmission across fractured beam-to-column junctions of reinforced concrete
Filippoupolitis, M., & Hopkins, C. (2021). Vibration transmission across fractured beam-to-column junctions of reinforced concrete. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings Vol. 263 (pp. 4779-4786). Institute of Noise Control Engineering (INCE). doi:10.3397/in-2021-2840
Reduced order integration for the radiation efficiency of a rectangular plate
Yu, Y., & Hopkins, C. (2021). Reduced order integration for the radiation efficiency of a rectangular plate. JASA Express Letters, 1(6), 062801. doi:10.1121/10.0005268
Intelligibility prediction for speech mixed with white Gaussian noise at low signal-to-noise ratios
Graetzer, S., & Hopkins, C. (2021). Intelligibility prediction for speech mixed with white Gaussian noise at low signal-to-noise ratios. The Journal of the Acoustical Society of America, 149(2), 1346-1362. doi:10.1121/10.0003557
Experimental validation of finite element models representing stacked concrete beams with unbonded surface contacts
Filippoupolitis, M., & Hopkins, C. (2021). Experimental validation of finite element models representing stacked concrete beams with unbonded surface contacts. ENGINEERING STRUCTURES, 227. doi:10.1016/j.engstruct.2020.111421
Sampling procedures on reception plates to quantify structure-borne sound power from machinery
Reinhold, S., & Hopkins, C. (2021). Sampling procedures on reception plates to quantify structure-borne sound power from machinery. Applied Acoustics. doi:10.1016/j.apacoust.2020.107649
Supplementing the Modal Assurance Criterion (MAC) with the Partial Modal Vector Ratio (PMVR) for the validation of fem models
Filippoupolitis, M., & Hopkins, C. (2021). Supplementing the Modal Assurance Criterion (MAC) with the Partial Modal Vector Ratio (PMVR) for the validation of fem models. In "Advances in Acoustics, Noise and Vibration - 2021" Proceedings of the 27th International Congress on Sound and Vibration, ICSV 2021.
2020
Prediction of maximum fast time-weighted velocity levels from a rubber ball impact on a timber floor
Shen, X., & Hopkins, C. (2020). Prediction of maximum fast time-weighted velocity levels from a rubber ball impact on a timber floor. In Forum Acusticum 2020. Lyon (Online).
Teaching music using vibration
Hopkins, C., Barker, N., & Seiffert, G. (2020). Teaching music using vibration. British Association of Teachers of the Deaf.
Empirical models for artificial and natural rainfall to assess rain noise inside buildings and cars
Hopkins, C., & Yu, Y. (2020). Empirical models for artificial and natural rainfall to assess rain noise inside buildings and cars. In Proceedings of 2020 International Congress on Noise Control Engineering, INTER-NOISE 2020.
Re-considering the impedance method used to predict impact sound insulation from heavy impacts
Hirakawa, S., & Hopkins, C. (2020). Re-considering the impedance method used to predict impact sound insulation from heavy impacts. In Proceedings of 2020 International Congress on Noise Control Engineering, INTER-NOISE 2020.
Attitudes to Noise Inside Dwellings in Three Megacities: Seoul, London, and Sao Paulo
Lee, P. J., Hopkins, C., & Penedo, R. (2020). Attitudes to Noise Inside Dwellings in Three Megacities: Seoul, London, and Sao Paulo. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH, 17(16). doi:10.3390/ijerph17166005
Helping deaf people feel the music
Crewe, S. (2020). Helping deaf people feel the music. Retrieved from https://hbkworld.com/helping-deaf-people-feel-the-music/
Airflow resistance measurement of fibrous materials at high temperatures for acoustical applications
Samarasinghe, T., Hopkins, C., Seiffert, G., & Knox, J. (2020). Airflow resistance measurement of fibrous materials at high temperatures for acoustical applications. APPLIED ACOUSTICS, 164. doi:10.1016/j.apacoust.2020.107255
Reciprocal auditory attenuation affects looking behaviour and playing level but not ensemble synchrony: A psychoacoustical study of violin duos
Fulford, R., Hopkins, C., Seiffert, G., & Ginsborg, J. (2020). Reciprocal auditory attenuation affects looking behaviour and playing level but not ensemble synchrony: A psychoacoustical study of violin duos. MUSICAE SCIENTIAE, 24(2), 168-185. doi:10.1177/1029864918785941
Empirical models for the structure-borne sound power input from artificial and natural rainfall
Yu, Y., & Hopkins, C. (2020). Empirical models for the structure-borne sound power input from artificial and natural rainfall. APPLIED ACOUSTICS, 162. doi:10.1016/j.apacoust.2019.107199
PREDICTION OF RAIN NOISE IN BUILDINGS USING EMPIRICAL MODELS FOR ARTIFICIAL AND NATURAL RAINFALL
Hopkins, C., & Yu, Y. (2020, October 5). PREDICTION OF RAIN NOISE IN BUILDINGS USING EMPIRICAL MODELS FOR ARTIFICIAL AND NATURAL RAINFALL. In ACOUSTICS 2020. Institute of Acoustics. doi:10.25144/13331
2019
Airflow resistance measurements between room temperature and 800 degrees Centigrade
Samarasinghe, T., Hopkins, C. P., Seiffert, G., & Knox, J. (2019). Airflow resistance measurements between room temperature and 800 degrees Centigrade. In ICA. Aachen.
Effects of limited attenuation and signal replay on ideal binary masked speech with very low mixture SNRs
Graetzer, S., & Hopkins, C. (2019). Effects of limited attenuation and signal replay on ideal binary masked speech with very low mixture SNRs. In Speech in Noise 2019. Ghent, Belgium.
Airflow resistance measurements between room temperature and 800?
Samarasinghe, T., Hopkins, C., Seiffert, G., & Knox, J. (2019). Airflow resistance measurements between room temperature and 800?. In Proceedings of the International Congress on Acoustics Vol. 2019-September (pp. 1387-1393). doi:10.18154/RWTH-CONV-239401
Comparison of ideal mask-based speech enhancement algorithms for white noise and low mixture signal-to-noise ratios
Graetzer, S., & Hopkins, C. (2019). Comparison of ideal mask-based speech enhancement algorithms for white noise and low mixture signal-to-noise ratios. In Proceedings of the International Congress on Acoustics Vol. 2019-September (pp. 6182-6189). doi:10.18154/RWTH-CONV-239141
Experimental validation of a finite element model for a heavy impact from the standard rubber ball on a timber floor
Shen, X., & Hopkins, C. (2019). Experimental validation of a finite element model for a heavy impact from the standard rubber ball on a timber floor. In Proceedings of the International Congress on Acoustics Vol. 2019-September (pp. 1271-1277). doi:10.18154/RWTH-CONV-239285
Prediction of maximum fast time-weighted sound pressure levels from time-varying structure-borne sound sources in heavyweight buildings
Reinhold, S., Hopkins, C., & Seiffert, G. (2019). Prediction of maximum fast time-weighted sound pressure levels from time-varying structure-borne sound sources in heavyweight buildings. In Proceedings of the International Congress on Acoustics Vol. 2019-September (pp. 1248-1254). doi:10.18154/RWTH-CONV-238845
Vibration transmission between two reinforced concrete beams with surface-to-surface contact conditions
Filippoupolitis, M., & Hopkins, C. (2019). Vibration transmission between two reinforced concrete beams with surface-to-surface contact conditions. In Proceedings of the International Congress on Acoustics Vol. 2019-September (pp. 8140-8147). doi:10.18154/RWTH-CONV-239313
2018
Experimental determination of transient structure-borne sound power from heavy impact sources on heavyweight floors with floating floors using an inverse form of transient statistical energy analysis
Hirakawa, S., & Hopkins, C. (2018). Experimental determination of transient structure-borne sound power from heavy impact sources on heavyweight floors with floating floors using an inverse form of transient statistical energy analysis. APPLIED ACOUSTICS, 140, 74-82. doi:10.1016/j.apacoust.2018.05.020
Estimating maximum Fast time-weighted vibration levels from short equivalent continuous vibration level measurements of structure-borne sound sources on heavyweight plates
Reinhold, S., Hopkins, C. P., & Seiffert, G. (2018). Estimating maximum Fast time-weighted vibration levels from short equivalent continuous vibration level measurements of structure-borne sound sources on heavyweight plates. In Euronoise 2018. Crete, Greece.
Measurement and prediction of structure-borne sound transmission from machinery in timber-frame buildings
Mayr, A., Schopfer, F., Schanda, U., & Hopkins, C. P. (2018). Measurement and prediction of structure-borne sound transmission from machinery in timber-frame buildings. In Euronoise 2018. Crete, Greece.
Sound transmission in buildings: recent developments and current challenges in measurement and prediction
Hopkins, C. P. (2018). Sound transmission in buildings: recent developments and current challenges in measurement and prediction. In Euronoise 2018. Crete, Greece.
Experimental determination of forces applied by liquid water drops at high drop velocities impacting a glass plate with and without a shallow water layer using wavelet deconvolution
Yu, Y., & Hopkins, C. P. (2018). Experimental determination of forces applied by liquid water drops at high drop velocities impacting a glass plate with and without a shallow water layer using wavelet deconvolution. Experiments in Fluids, 59(5). doi:10.1007/s00348-018-2537-9
Structure-borne sound power characterisation from single and multiple contact sources at low frequencies using heavyweight reception plates
Reinhold, S., Hopkins, C., & Zeitler, B. (2018). Structure-borne sound power characterisation from single and multiple contact sources at low frequencies using heavyweight reception plates. In DAGA 2018. Munich.
Prediction of sound transmission in long spaces using ray tracing and experimental Statistical Energy Analysis
Jang, H., & Hopkins, C. (2018). Prediction of sound transmission in long spaces using ray tracing and experimental Statistical Energy Analysis. APPLIED ACOUSTICS, 130, 15-33. doi:10.1016/j.apacoust.2017.09.004
Comparison and assessment of Japanese, Korean and international measurement procedures for impact sound insulation with heavy impact sources
Hirakawa, S., Hopkins, C., & Lee, P. J. (2018). Comparison and assessment of Japanese, Korean and international measurement procedures for impact sound insulation with heavy impact sources. In 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling Vol. 7 (pp. 4384-4391).
Evaluation of stoi for speech at low signal-to-noise ratios after enhancement with ideal binary masks
Graetzer, S., & Hopkins, C. (2018). Evaluation of stoi for speech at low signal-to-noise ratios after enhancement with ideal binary masks. In 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling Vol. 6 (pp. 3645-3652).
Modal sampling technique on reception plates to characterize structure-borne sound sources
Zeitler, B., Reinhold, S., Jakob, A., & Hopkins, C. (2018). Modal sampling technique on reception plates to characterize structure-borne sound sources. In INTER-NOISE 2018 - 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering.
Prediction of heavy impact sounds using transient statistical energy analysis and finite element methods
Hirakawa, S., & Hopkins, C. (2018). Prediction of heavy impact sounds using transient statistical energy analysis and finite element methods. In 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling Vol. 7 (pp. 4377-4383).
Rain noise: Empirical models for the force applied by raindrops to a plate with and without a water layer
Hopkins, C., & Yu, Y. (2018). Rain noise: Empirical models for the force applied by raindrops to a plate with and without a water layer. In 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling Vol. 1 (pp. 407-414).
Using wavelet deconvolution to determine the force applied by drops of water on dry plates and plates with a shallow water layer
Yu, Y., & Hopkins, C. (2018). Using wavelet deconvolution to determine the force applied by drops of water on dry plates and plates with a shallow water layer. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018) (pp. 2119-2126). Retrieved from https://www.webofscience.com/
2017
Finite difference time domain modelling of a point-excited elastic plate radiating into an acoustic cavity
Ferreira, N., & Hopkins, C. (2017). Finite difference time domain modelling of a point-excited elastic plate radiating into an acoustic cavity. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 142(5), 2996-3012. doi:10.1121/1.5009460
An assessment of objective intelligibility metrics for signals with low mixture signal-to-noise ratios after enhancement using Ideal Binary Masks
Graetzer, S., & Hopkins, C. (2018, January 11). An assessment of objective intelligibility metrics for signals with low mixture signal-to-noise ratios after enhancement using Ideal Binary Masks. In Speech in Noise (SpiN). Glasgow Scotland.
Modelling the sound field inside an automotive cabin using Experimental Statistical Energy Analysis
Jang, H., & Hopkins, C. P. (2017). Modelling the sound field inside an automotive cabin using Experimental Statistical Energy Analysis. In KSNVE Autumn Conference. Korea.
Structural dynamics of a dowelled-joist timber floor in the low-frequency range modelled using finite element simulation
Filippoupolitis, M., Hopkins, C., Voeltl, R., Schanda, U., Mahn, J., & Krajci, L. (2017). Structural dynamics of a dowelled-joist timber floor in the low-frequency range modelled using finite element simulation. ENGINEERING STRUCTURES, 148, 602-620. doi:10.1016/j.engstruct.2017.07.009
Measurement of transmission functions in lightweight buildings for the prediction of structure-borne sound transmission from machinery
Schöpfer, F., Hopkins, C. P., Mayr, A., & Schanda, U. (2017). Measurement of transmission functions in lightweight buildings for the prediction of structure-borne sound transmission from machinery. Acta Acustica United with Acustica, 103(3), 451-461. doi:10.3813/AAA.919075
Chapter 7: Sound insulation in buildings
Hopkins, C. P. (2017). Chapter 7: Sound insulation in buildings. In N. Xiang (Ed.), Architectural Acoustics Handbook (pp. 137-171). J. Ross Publishing.
Ansätze zur Prognose des Installationspegels im Holz-Leichtbau
Schopfer, F., Hopkins, C. P., Mayr, A., & Schanda, U. (2017). Ansätze zur Prognose des Installationspegels im Holz-Leichtbau. In DAGA 2017. Kiel, Germany.
Numerical simulation of a laboratory reception plate using finite elements
Reinhold, S., Hopkins, C. P., & Zeitler, B. (2017). Numerical simulation of a laboratory reception plate using finite elements. In DAGA 2017. Kiel, Germany.
An assessment of objective indicators of speech intelligibility in noise at low signal-to-noise ratios
Graetzer, S., & Hopkins, C. (2017). An assessment of objective indicators of speech intelligibility in noise at low signal-to-noise ratios. In 24th International Congress on Sound and Vibration, ICSV 2017.
An inverse form of transient statistical energy analysis to determine the transient power input with floating floor systems
Hirakawa, S., Hopkins, C., Lee, P. J., & Seiffert, G. (2017). An inverse form of transient statistical energy analysis to determine the transient power input with floating floor systems. In 24th International Congress on Sound and Vibration, ICSV 2017.
Finite difference time domain modelling of radiation from a point-excited elastic plate into a reverberant space
Ferreira, N., & Hopkins, C. (2017). Finite difference time domain modelling of radiation from a point-excited elastic plate into a reverberant space. In 24th International Congress on Sound and Vibration, ICSV 2017.
Low-frequency structure-borne sound power measurements using heavyweight reception plates
Reinhold, S., Hopkins, C., & Zeitler, B. (2017). Low-frequency structure-borne sound power measurements using heavyweight reception plates. In 24th International Congress on Sound and Vibration, ICSV 2017.
Prediction of noise from machinery in timber-frame buildings using transmission functions
Schöpfer, F., Mayr, A. R., Schanda, U., & Hopkins, C. (2017). Prediction of noise from machinery in timber-frame buildings using transmission functions. In 24th International Congress on Sound and Vibration, ICSV 2017.
Prediction of vibration transmission across plate junctions with a periodic ribbed plate using SEA and ASEA
Yin, J., Hopkins, C., & Yang, H. (2017). Prediction of vibration transmission across plate junctions with a periodic ribbed plate using SEA and ASEA. In 24th International Congress on Sound and Vibration, ICSV 2017.
Using experimental statistical energy analysis to determine loss factors for coupled space subsystems in a car cabin
Jang, H., & Hopkins, C. (2017). Using experimental statistical energy analysis to determine loss factors for coupled space subsystems in a car cabin. In 24th International Congress on Sound and Vibration, ICSV 2017.
Validation of a wavelet deconvolution method for experimental determination of the force applied by liquid water drops
Yu, Y., & Hopkins, C. (2017). Validation of a wavelet deconvolution method for experimental determination of the force applied by liquid water drops. In 24th International Congress on Sound and Vibration, ICSV 2017.
Vibration transmission between stacked rein-forced concrete beams using Monte Carlo simulations with finite element methods
Filippoupolitis, M., Hopkins, C., & Au, S. K. (2017). Vibration transmission between stacked rein-forced concrete beams using Monte Carlo simulations with finite element methods. In 24th International Congress on Sound and Vibration, ICSV 2017.
2016
Comparison of high-intensity sound and mechanical vibration for cleaning porous titanium cylinders fabricated using selective laser melting
Seiffert, G., Hopkins, C., & Sutcliffe, C. (2016). Comparison of high-intensity sound and mechanical vibration for cleaning porous titanium cylinders fabricated using selective laser melting. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105(1), 117-123. doi:10.1002/jbm.b.33535
Regression curves for vibration transmission across junctions of heavyweight walls and floors based on finite element methods and wave theory
Hopkins, C., Crispin, C., Poblet-Puig, J., & Guigou-Carter, C. (2016). Regression curves for vibration transmission across junctions of heavyweight walls and floors based on finite element methods and wave theory. APPLIED ACOUSTICS, 113, 7-21. doi:10.1016/j.apacoust.2016.06.002
Modelling flexural and in-plane wave transmission across frameworks and grillages of beams using Advanced Statistical Energy Analysis
Hopkins, C. P., & Wang, X. (2016). Modelling flexural and in-plane wave transmission across frameworks and grillages of beams using Advanced Statistical Energy Analysis. In KSNVE Autumn Conference. Korea.
Bending, longitudinal and torsional wave transmission on Euler-Bernoulli and Timoshenko beams with high propagation losses
Wang, X., & Hopkins, C. P. (2016). Bending, longitudinal and torsional wave transmission on Euler-Bernoulli and Timoshenko beams with high propagation losses. Journal of the Acoustical Society of America, 140(04), 2312-2332. doi:10.1121/1.4963900
Using Statistical Energy Analysis to predict sound insulation in buildings
Hopkins, C. P. (2016). Using Statistical Energy Analysis to predict sound insulation in buildings. In IoA Acoustics 2016 Vol. 38.
Prediction of airborne sound transmission across a timber-concrete composite floor using Statistical Energy Analysis
Churchill, C., & Hopkins, C. (2016). Prediction of airborne sound transmission across a timber-concrete composite floor using Statistical Energy Analysis. APPLIED ACOUSTICS, 110, 145-159. doi:10.1016/j.apacoust.2016.03.031
The influence of force distribution on structure-borne sound power in buildings
Gibbs, B. M., & Hopkins, C. (2016). The influence of force distribution on structure-borne sound power in buildings. In Forum Acusticum. Krakow.
Vibrotactile presentation of musical notes to the skin
Hopkins, C. P., Mate-Cid, S., Seiffert, G., Ginsborg, J., & Fulford, R. (2016, October 13). Vibrotactile presentation of musical notes to the skin. In Music and Cochlea Implants Symposium. Erikshol Research Centre.
Predicting and measuring sound transmission in buildings at low frequencies
Hopkins, C. P. (2016). Predicting and measuring sound transmission in buildings at low frequencies. In Internoise 2016 - Satellite symposium on building acoustics. Berlin.
Comparison of high-intensity sound and mechanical vibration for cleaning porous titanium cylinders fabricated using selective laser melting
Seiffert, G., Hopkins, C., & Sutcliffe, C. (2016). Comparison of high-intensity sound and mechanical vibration for cleaning porous titanium cylinders fabricated using selective laser melting. In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (pp. 1557-1565).
Experimentally validated finite element models of two reinforced concrete beams subjected to surface-to-surface contact condition
Filippoupolitis, M., Hopkins, C., & Au, S. K. (2016). Experimentally validated finite element models of two reinforced concrete beams subjected to surface-to-surface contact condition. In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (pp. 1649-1656).
Finite element simulation of a laboratory reception plate for structure-borne sound power measurements
Reinhold, S., Hopkins, C., & Zeitler, B. (2016). Finite element simulation of a laboratory reception plate for structure-borne sound power measurements. In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (pp. 3734-3742).
Impact sound insulation: Transient power input from the rubber ball on locally reacting mass-spring systems
Hirakawa, S., Hopkins, C., & Lee, P. J. (2016). Impact sound insulation: Transient power input from the rubber ball on locally reacting mass-spring systems. In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (pp. 6281-6290).
Modelling structure-borne sound transmission across a timber-frame wall using SEA
Schöpfer, F., Hopkins, C., Mayr, A. R., & Schanda, U. (2016). Modelling structure-borne sound transmission across a timber-frame wall using SEA. In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (pp. 3752-3761).
Modelling vibration transmission on frameworks of beams using Advanced Statistical Energy Analysis
Hopkins, C., & Wang, X. (2016). Modelling vibration transmission on frameworks of beams using Advanced Statistical Energy Analysis. In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (pp. 2452-2460).
Vibroacoustic finite element modelling of the low-frequency performance of a solid timber floor formed from dowel-connected joists
Hopkins, C., Filippoupolitis, M., Ferreira, N., Völtl, R., Schanda, U., Mahn, J., & Krajči, L. (2016). Vibroacoustic finite element modelling of the low-frequency performance of a solid timber floor formed from dowel-connected joists. In Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future (pp. 1115-1122).
Vibrotactile Presentation of Musical Notes to the Glabrous Skin for Adults with Normal Hearing or a Hearing Impairment: Thresholds, Dynamic Range and High-Frequency Perception
Hopkins, C., Mate-Cid, S., Fulford, R., Seiffert, G., & Ginsborg, J. (2016). Vibrotactile Presentation of Musical Notes to the Glabrous Skin for Adults with Normal Hearing or a Hearing Impairment: Thresholds, Dynamic Range and High-Frequency Perception. PLOS ONE, 11(05), 25 pages. doi:10.1371/journal.pone.0155807
Book Review
Hopkins, C. (2016). Book Review. Applied Acoustics, 106, 1. doi:10.1016/j.apacoust.2015.12.020
Entwicklung eines SEA-Modells fur eine Holzrahmenbauwand mit N+F Beplankungslagen
Schopfer, F., Hopkins, C. P., Mayr, A., & Schanda, U. (2016). Entwicklung eines SEA-Modells fur eine Holzrahmenbauwand mit N+F Beplankungslagen. In DAGA. Aachen, Germany.
Experimental validation of finite element models for reinforced concrete beams with and without discontinuities
Filippoupolitis, M., Hopkins, C., & Au, S. -K. (2016). EXPERIMENTAL VALIDATION OF FINITE ELEMENT MODELS FOR REINFORCED CONCRETE BEAMS WITH AND WITHOUT DISCONTINUITIES. In Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016) (pp. 5454-5463). Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA) Greece. doi:10.7712/100016.2194.11638
On the use of high-intensity sound for acoustic cleaning of porous titanium medical implants fabricated using selective laser melting
Seiffert, G., & Sutcliffe, C. (2016). On the use of high-intensity sound for acoustic cleaning of porous titanium medical implants fabricated using selective laser melting. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings Vol. 253 (pp. 1637-1645). Institute of Noise Control Engineering.
2015
Prediction of maximum fast time-weighted sound pressure levels due to transient excitation from the rubber ball and human footsteps
Robinson, M., & Hopkins, C. (2015). Prediction of maximum fast time-weighted sound pressure levels due to transient excitation from the rubber ball and human footsteps. BUILDING AND ENVIRONMENT, 94, 810-820. doi:10.1016/j.buildenv.2015.06.013
Prediction of vibration transmission across finite periodic structures using Advanced Statistical Energy Analysis
Hopkins, C., Yin, J., Wilson, D., & Wang, X. (2015). Prediction of vibration transmission across finite periodic structures using Advanced Statistical Energy Analysis. In KSNVE Autumn Conference. Korea.
Using Transient Statistical Energy Analysis to predict impact sounds in buildings from the rubber ball and human footsteps
Hopkins, C., Robinson, M., & Lee, P. -J. (2015). Using Transient Statistical Energy Analysis to predict impact sounds in buildings from the rubber ball and human footsteps. In KSNVE Autumn Conference. Korea.
Characterisation of sources and transmission of structure-borne sound by a reception plate method
Gibbs, B., Hopkins, C., & Lai, K. (2015). Characterisation of sources and transmission of structure-borne sound by a reception plate method. In Internoise 2015 (pp. 1-9). San Francisco, USA.
Assessing spatial correlation in reverberant fields using ray tracing
Jang, H., & Hopkins, C. (2015). ASSESSING SPATIAL CORRELATION IN REVERBERANT SOUND FIELDS USING RAY TRACING. In PROCEEDINGS OF THE 22ND INTERNATIONAL CONGRESS ON SOUND AND VIBRATION. Retrieved from https://www.webofscience.com/
Structure-borne sound transmission across a double-leaf timber frame wall
Schöpfer, F., Mayr, A., Schanda, U., & Hopkins, C. (2015). Structure-borne sound transmission across a double-leaf timber frame wall. In ICSV22. Florence, Italy.
Laboratory characterisation and prediction of structure-borne sound transmission of sanitary installations in heavyweight buildings
Reinhold, S., Scheck, J., Fischer, H. M., Ruff, A., & Hopkins, C. (2015). Laboratory characterisation and prediction of structure-borne sound transmission of sanitary installations in heavyweight buildings. In Euronoise 2015 (pp. 1097-1102).
Measured transmission functions from structure-borne sound sources in a timber-frame construction
Schöpfer, F., Hopkins, C., Mayr, A. R., & Schanda, U. (2015). Measured transmission functions from structure-borne sound sources in a timber-frame construction. In Euronoise 2015 (pp. 1091-1096).
Speech security outside meeting rooms
Hopkins, C., Robinson, M., Worrall, K., & Jackson, T. (2015). Speech security outside meeting rooms. In Euronoise 2015 (pp. 1215-1220).
Treating periodic ribbed plates with symmetric ribs as individual subsystems in Statistical Energy Analysis: Models for bending wave transmission across L-junctions in the low- and mid-frequency ranges
Yin, J., & Hopkins, C. (2015). Treating periodic ribbed plates with symmetric ribs as individual subsystems in Statistical Energy Analysis: Models for bending wave transmission across L-junctions in the low- and mid-frequency ranges. JOURNAL OF SOUND AND VIBRATION, 344, 221-241. doi:10.1016/j.jsv.2015.01.031
Analysis of bending wave transmission using beam tracing with advanced statistical energy analysis for periodic box-like structures affected by spatial filtering
Wilson, D., & Hopkins, C. (2015). Analysis of bending wave transmission using beam tracing with advanced statistical energy analysis for periodic box-like structures affected by spatial filtering. JOURNAL OF SOUND AND VIBRATION, 341, 138-161. doi:10.1016/j.jsv.2014.12.029
Messungen der Körperschallintensität in einer Holzrahmenbaustruktur
Schöpfer, F., Hopkins, C., Mayr, A., & Schanda, U. (2015). Messungen der Körperschallintensität in einer Holzrahmenbaustruktur. In DAGA. Nürnberg, Germany.
Characterisation of sources and transmission of structure-borne sound by a reception plate method
Gibbs, B., Hopkins, C., & Lai, K. (2015). Characterisation of sources and transmission of structure-borne sound by a reception plate method. In INTER-NOISE 2015 - 44th International Congress and Exposition on Noise Control Engineering.
Modelling Bending Wave Transmission across Coupled Plate Systems Comprising Periodic Ribbed Plates in the Low-, Mid-, and High-Frequency Ranges Using Forms of Statistical Energy Analysis
Yin, J., & Hopkins, C. (2015). Modelling Bending Wave Transmission across Coupled Plate Systems Comprising Periodic Ribbed Plates in the Low-, Mid-, and High-Frequency Ranges Using Forms of Statistical Energy Analysis. SHOCK AND VIBRATION, 2015. doi:10.1155/2015/467875
Prediction of low-frequency radiation efficiencies using the normal mode approach and finite element methods
Hopkins, C., Filippoupolitis, M., & Ferreira, N. (2015). PREDICTION OF LOW-FREQUENCY RADIATION EFFICIENCIES USING THE NORMAL MODE APPROACH AND FINITE ELEMENT METHODS. In PROCEEDINGS OF THE 22ND INTERNATIONAL CONGRESS ON SOUND AND VIBRATION. Retrieved from https://www.webofscience.com/
Prediction of the dynamic properties of a cross laminated timber plate from an investigation of the eigenmodes using a scanning laser Vibrometer
Churchill, C., & Hopkins, C. (2015). Prediction of the dynamic properties of a cross laminated timber plate from an investigation of the eigenmodes using a scanning laser Vibrometer. In Proceedings of the Institute of Acoustics Vol. 37 (pp. 193-196).
Providing speech security for meeting rooms using the threshold of information leakage
Hopkins, C., Robinson, M., Worrall, K., & Jackson, T. (2015). Providing speech security for meeting rooms using the threshold of information leakage. In INTER-NOISE 2015 - 44th International Congress and Exposition on Noise Control Engineering.
Revision of international standards on field measurements of airborne, impact and facade sound insulation to form the ISO 16283 series
Hopkins, C. (2015). Revision of international standards on field measurements of airborne, impact and facade sound insulation to form the ISO 16283 series. BUILDING AND ENVIRONMENT, 92, 703-712. doi:10.1016/j.buildenv.2015.05.043
Structure-borne sound propagation across a double leaf timber-frame wall
Schoepfer, F., Mayr, A. R., Schanda, U., & Hopkins, C. (2015). STRUCTURE-BORNE SOUND PROPAGATION ACROSS A DOUBLE LEAF TIMBER-FRAME WALL. In PROCEEDINGS OF THE 22ND INTERNATIONAL CONGRESS ON SOUND AND VIBRATION. Retrieved from https://www.webofscience.com/
2014
Determination of Vibration Reduction Indices Using Wave Theory for Junctions in Heavyweight Buildings
Hopkins, C. (2014). Determination of Vibration Reduction Indices Using Wave Theory for Junctions in Heavyweight Buildings. ACTA ACUSTICA UNITED WITH ACUSTICA, 100(6), 1056-1066. doi:10.3813/AAA.918785
Thresholds of information leakage for speech security outside meeting rooms
Robinson, M., Hopkins, C., Worrall, K., & Jackson, T. (2014). Thresholds of information leakage for speech security outside meeting rooms. Journal of the Acoustical Society of America, 136(3), 1149-1159. doi:10.1121/1.4892858
Using transient and steady-state SEA to assess potential errors in the measurement of structure-borne sound power input from machinery on coupled reception plates
Hopkins, C., & Robinson, M. (2014). Using transient and steady-state SEA to assess potential errors in the measurement of structure-borne sound power input from machinery on coupled reception plates. APPLIED ACOUSTICS, 79, 35-41. doi:10.1016/j.apacoust.2013.12.013
Application of SEA and advanced SEA to structure-borne sound transmission on a rectangular beam framework
Wang, X., & Hopkins, C. (2014). Application of SEA and advanced SEA to structure-borne sound transmission on a rectangular beam framework. In 21st International Congress on Sound and Vibration 2014, ICSV 2014 Vol. 2 (pp. 1549-1556).
Case study on the vibrational behavior of a timber-frame structure
Schöpfer, F., Hopkins, C., Mayr, A. R., & Schanda, U. (2014). Case study on the vibrational behavior of a timber-frame structure. In Proceedings of Forum Acusticum Vol. 2014-January.
Effects of signal processing on the measurement of maximum sound pressure levels
Robinson, M., & Hopkins, C. (2014). Effects of signal processing on the measurement of maximum sound pressure levels. APPLIED ACOUSTICS, 77, 11-19. doi:10.1016/j.apacoust.2013.09.017
Experimentally validated finite element models for the modal response of a solid timber floor formed from dowel-connected joists
Filippoupolitis, M., Hopkins, C., Völtl, R., Schanda, U., Mahn, J., & Krajci, L. (2014). Experimentally validated finite element models for the modal response of a solid timber floor formed from dowel-connected joists. In Proceedings of Forum Acusticum Vol. 2014-January.
INTERACTIVE PERFORMANCE FOR MUSICIANS WITH HEARING IMPAIRMENTS USING THE VIBROTACTILE MODE
HOPKINS, C., GINSBORG, J., MATÉ-CID, S., FULFORD, R., & SEIFFERT, G. (2014, October 15). INTERACTIVE PERFORMANCE FOR MUSICIANS WITH HEARING IMPAIRMENTS USING THE VIBROTACTILE MODE. In IOA 40th Anniversary Conference 2014. Institute of Acoustics. doi:10.25144/16259
ISO 16283-1 Acoustics - Field measurement of sound insulation in buildings and of building elements - Airborne sound insulation
Hopkins, C. (2014). ISO 16283-1 Acoustics - Field measurement of sound insulation in buildings and of building elements - Airborne sound insulation. International Organisation for Standardisation.
Interactive performance for musicians with a hearing impairment
Hopkins, C., Ginsborg, J., Mate-Cid, S., Fulford, R., & Seiffert, G. (2014). Interactive performance for musicians with a hearing impairment. Birmingham.
Prediction of Maximum Time-Weighted Sound and Vibration Levels Using Transient Statistical Energy Analysis. Part 1: Theory and Numerical Implementation
Robinson, M., & Hopkins, C. (2014). Prediction of Maximum Time-Weighted Sound and Vibration Levels Using Transient Statistical Energy Analysis. Part 1: Theory and Numerical Implementation. ACTA ACUSTICA UNITED WITH ACUSTICA, 100(1), 46-56. doi:10.3813/AAA.918685
Prediction of Maximum Time-Weighted Sound and Vibration Levels Using Transient Statistical Energy Analysis. Part 2: Experimental Validation
Robinson, M., & Hopkins, C. (2014). Prediction of Maximum Time-Weighted Sound and Vibration Levels Using Transient Statistical Energy Analysis. Part 2: Experimental Validation. ACTA ACUSTICA UNITED WITH ACUSTICA, 100(1), 57-66. doi:10.3813/AAA.918686
Prediction of flexural wave transmission using advanced sea for three coupled plates incorporating a periodic ribbed plate
Yin, J., Hopkins, C., & Wen, J. (2014). Prediction of flexural wave transmission using advanced sea for three coupled plates incorporating a periodic ribbed plate. In 21st International Congress on Sound and Vibration 2014, ICSV 2014 Vol. 4 (pp. 3102-3108).
Prediction of vibration reduction indices for plate junctions using wave theory
Hopkins, C. (2014). Prediction of vibration reduction indices for plate junctions using wave theory. In Proceedings of Forum Acusticum Vol. 2014-January.
Sight, sound and synchrony: effects of attenuating auditory information on duo violinists behaviours in performance
Fulford, R., Hopkins, C., Seiffert, G., & Ginsborg, J. (2014). Sight, sound and synchrony: effects of attenuating auditory information on duo violinists behaviours in performance. In ICMPC 13. Seoul: ICMPC.
Structure-borne sound transmission across periodic box-like structures affected by spatial filtering
Hopkins, C., & Wilson, D. (2014). Structure-borne sound transmission across periodic box-like structures affected by spatial filtering. In 21st International Congress on Sound and Vibration 2014, ICSV 2014 Vol. 3 (pp. 2167-2173).
Structure-borne sound transmission from a sanitary installation wall
Reinhold, S., Scheck, J., Fischer, H. M., & Hopkins, C. (2014). Structure-borne sound transmission from a sanitary installation wall. In Proceedings of Forum Acusticum Vol. 2014-January.
The Optimization of a wooden floor design based on validated finite element models
Mahn, J., Hopkins, C., Filippoupolitis, M., Schanda, U., Völtl, R., & Krajči, L. (2014). The Optimization of a wooden floor design based on validated finite element models. In INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control.
The influence of force distribution on structure-borne sound power sources in buildings
Gibbs, B., & Hopkins, C. (2014). The influence of force distribution on structure-borne sound power sources in buildings. In Proceedings of Forum Acusticum Vol. 2014-January.
2013
Using finite-difference time-domain methods with a Rayleigh approach to model low-frequency sound fields in small spaces subdivided by porous materials
Ferreira, N., & Hopkins, C. (2013). Using finite-difference time-domain methods with a Rayleigh approach to model low-frequency sound fields in small spaces subdivided by porous materials. Acoustical Science and Technology, 34(5), 332-341. doi:10.1250/ast.34.332
Modulation of Visually Evoked Postural Responses by Contextual Visual, Haptic and Auditory Information: A 'Virtual Reality Check'
Meyer, G. F., Shao, F., White, M. D., Hopkins, C., & Robotham, A. J. (2013). Modulation of Visually Evoked Postural Responses by Contextual Visual, Haptic and Auditory Information: A 'Virtual Reality Check'. PLOS ONE, 8(6). doi:10.1371/journal.pone.0067651
Prediction of high-frequency vibration transmission across coupled, periodic ribbed plates by incorporating tunneling mechanisms
Yin, J., & Hopkins, C. (2013). Prediction of high-frequency vibration transmission across coupled, periodic ribbed plates by incorporating tunneling mechanisms. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 133(4), 2069-2081. doi:10.1121/1.4792361
On the Evaluation of Decay Curves to Determine Structural Reverberation Times for Building Elements
Hopkins, C., & Robinson, M. (2013). On the Evaluation of Decay Curves to Determine Structural Reverberation Times for Building Elements. ACTA ACUSTICA UNITED WITH ACUSTICA, 99(2), 226-244. doi:10.3813/AAA.918606
Competitive wooden floor systems - Multi-objective optimization based on acoustics improvement
Mahn, J., Hopkins, C., Schanda, U., & Krajči, L. (2013). Competitive wooden floor systems - Multi-objective optimization based on acoustics improvement. In 42nd International Congress and Exposition on Noise Control Engineering 2013, INTER-NOISE 2013: Noise Control for Quality of Life Vol. 3 (pp. 1838-1846).
Development of SEA models of composite heavyweight-lightweight floors by incorporating measured stiffness data for suspended ceiling hangers
Churchill, C., & Hopkins, C. (2013). Development of SEA models of composite heavyweight-lightweight floors by incorporating measured stiffness data for suspended ceiling hangers. In 42nd International Congress and Exposition on Noise Control Engineering 2013, INTER-NOISE 2013: Noise Control for Quality of Life Vol. 3 (pp. 1810-1819).
Incorporating tunneling mechanisms with advanced statistical energy analysis to predict flexural wave transmission across a periodic plate with symmetric ribs
Hopkins, C., & Yin, J. (2013). Incorporating tunneling mechanisms with advanced statistical energy analysis to predict flexural wave transmission across a periodic plate with symmetric ribs. In 20th International Congress on Sound and Vibration 2013, ICSV 2013 Vol. 4 (pp. 3086-3093).
Incorporating tunneling mechanisms with advanced statistical energy analysis to predict flexural wave transmission across a periodic plate with symmetric ribs
Hopkins, C., & Yin, J. (2013). Incorporating tunneling mechanisms with advanced statistical energy analysis to predict flexural wave transmission across a periodic plate with symmetric ribs. In International Congress on Sound and Vibration. Bangkok: International Congress on Sound and Vibration.
Inherent and learnt abilities for relative pitch in the vibrotactile domain using the fingertip
Hopkins, C., Maté-Cid, S., Seiffert, G., Fulford, R., & Ginsborg, J. (2013). Inherent and learnt abilities for relative pitch in the vibrotactile domain using the fingertip. In 20th International Congress on Sound and Vibration 2013, ICSV 2013 Vol. 4 (pp. 3207-3214).
Integration of decision support systems and GIS noise mapping
Ibrahim, H. G. A., Oldham, D. J., Hopkins, C., & Seiffert, G. (2013). Integration of decision support systems and GIS noise mapping. In 20th International Congress on Sound and Vibration 2013, ICSV 2013 Vol. 2 (pp. 1311-1318).
Interactive performance: Towards the use of vibrotactile technology by musicians with hearing impairments
Ginsborg, J., Hopkins, C., Fulford, R., Mate-Cid, S., & Seiffert, G. (2013). Interactive performance: Towards the use of vibrotactile technology by musicians with hearing impairments. In International Symposium on Performance Science 2013. Vienna: European Association of Conservatoires.
Measurement errors with maximum sound pressure levels used in building acoustics
Hopkins, C., & Robinson, M. (2013). Measurement errors with maximum sound pressure levels used in building acoustics. In 42nd International Congress and Exposition on Noise Control Engineering 2013, INTER-NOISE 2013: Noise Control for Quality of Life Vol. 2 (pp. 1284-1291).
Structure-borne sound transmission for networks of beams incorporated in large structures
Wang, X., & Hopkins, C. (2013). Structure-borne sound transmission for networks of beams incorporated in large structures. In International symposium on the theory and application of artificial periodic structures. Changsha: ISAPS.
Validation of the Rayleigh model in FDTD models to predict low-frequency sound fields in small volumes that are subdivided by porous materials
Ferreira, N., & Hopkins, C. (2013). Validation of the Rayleigh model in FDTD models to predict low-frequency sound fields in small volumes that are subdivided by porous materials. In AIA-DAGA 2013. Merano: AIA-DAGA 2013.
2012
Establishing vibrotactile thresholds on the fingertip for people with and without a hearing impairment over the musical frequency range between C1 and C6
Maté-Cid, S., Hopkins, C., Seiffert, G., Fulford, R., & Ginsborg, J. (2012). Establishing vibrotactile thresholds on the fingertip for people with and without a hearing impairment over the musical frequency range between C1 and C6. In 19th International Congress on Sound and Vibration 2012, ICSV 2012 Vol. 3 (pp. 2244-2251).
Measurement of vibrotactile thresholds on the fingertip to assess vibrotactile presentation of musical notes to people with and without a hearing impairment
Hopkins, C., Mate-Cid, S., Seiffert, G., Fulford, R., & Ginsborg, J. (2012). Measurement of vibrotactile thresholds on the fingertip to assess vibrotactile presentation of musical notes to people with and without a hearing impairment. In 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012 Vol. 4 (pp. 3361-3370).
Prediction of maximum sound pressure and vibration levels from the impact source of the ISO rubber ball using Transient Statistical Energy Analysis
Robinson, M., & Hopkins, C. (2012). Prediction of maximum sound pressure and vibration levels from the impact source of the ISO rubber ball using Transient Statistical Energy Analysis. In 19th International Congress on Sound and Vibration 2012, ICSV 2012 Vol. 1 (pp. 308-315).
Prediction of maximum sound pressure levels in heavyweight buildings using the ISO rubber ball as an impact source
Hopkins, C., & Robinson, M. (2012). Prediction of maximum sound pressure levels in heavyweight buildings using the ISO rubber ball as an impact source. In 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012 Vol. 8 (pp. 6690-6697).
Using a global mode approach on isolated junctions to calculate coupling loss factors for sea models of large heavyweight buildings
Wilson, D., & Hopkins, C. (2012). Using a global mode approach on isolated junctions to calculate coupling loss factors for sea models of large heavyweight buildings. In 19th International Congress on Sound and Vibration 2012, ICSV 2012 Vol. 2 (pp. 1405-1412).
Using transient and steady-state SEA to quantify errors in the measured structure-borne sound power input from machinery with coupled reception plates
Hopkins, C., & Robinson, M. (2012). Using transient and steady-state SEA to quantify errors in the measured structure-borne sound power input from machinery with coupled reception plates. In 19th International Congress on Sound and Vibration 2012, ICSV 2012 Vol. 1 (pp. 324-331).
Airborne sound transmission of a cross-laminated timber plate with orthotopic stiffness
Krajči, L., Hopkins, C., Davy, J. L., & Tröbs, H. M. (2012). Airborne sound transmission of a cross-laminated timber plate with orthotopic stiffness. In Proceedings - European Conference on Noise Control (pp. 202-207).
Errors and uncertainty in the measurement of maximum sound pressure levels in rooms
Robinson, M., & Hopkins, C. (2012). Errors and uncertainty in the measurement of maximum sound pressure levels in rooms. In IoA Autumn Conference 2012. Birmingham: Institute of Acoustics.
Keynote (Tyndall Medal) : Sound insulation in buildings - linking theory and practice
Hopkins, C. (2012). Keynote (Tyndall Medal) : Sound insulation in buildings - linking theory and practice. In Acoustics 2012. Nantes: IoA and SFA.
On the potential for vibrotactile technology to facilitate interactive performance for musicians with a hearing impairment
Hopkins, C., Ginsborg, J., Mate-Cid, S., Fulford, R., & Seiffert, G. (2012). On the potential for vibrotactile technology to facilitate interactive performance for musicians with a hearing impairment. In LIPAM 2012. Leeds: LIPAM.
Overview of changes proposed for field sound insulation testing in the ISO 16283 Standards
Hopkins, C. (2012). Overview of changes proposed for field sound insulation testing in the ISO 16283 Standards. In oA Autumn Conference 2013. Birmingham: Institute of Acoustics.
Perception and learning of relative pitch in the vibrotactile mode
Mate-Cid, S., Fulford, R., Hopkins, C., Seiffert, G., & Ginsborg, J. (2012). Perception and learning of relative pitch in the vibrotactile mode. In LIPAM 2012. Leeds: LIPAM.
2011
Modelling airborne sound transmission across a hybrid heavyweight- lightweight floor using Statistical Energy Analysis
Churchill, C., Hopkins, C., & Krajci, L. (2011). Modelling airborne sound transmission across a hybrid heavyweight- lightweight floor using Statistical Energy Analysis. In Proceedings of Forum Acusticum (pp. 1353-1357).
Predicting the effect of coupled spaces and structures on structural decay curves of building elements using transient statistical energy analysis
Robinson, M., & Hopkins, C. (2011). Predicting the effect of coupled spaces and structures on structural decay curves of building elements using transient statistical energy analysis. In 18th International Congress on Sound and Vibration 2011, ICSV 2011 Vol. 3 (pp. 2023-2030).
Prediction of low frequency structure-borne sound transmission between non-adjacent rooms in buildings using SEA and FEA
Wilson, D., & Hopkins, C. (2011). Prediction of low frequency structure-borne sound transmission between non-adjacent rooms in buildings using SEA and FEA. In Proceedings of Forum Acusticum (pp. 1979-1984).
Signal processing errors associated with the measurement of maximum sound pressure levels
Robinson, M., & Hopkins, C. (2011). Signal processing errors associated with the measurement of maximum sound pressure levels. In 18th International Congress on Sound and Vibration 2011, ICSV 2011 Vol. 4 (pp. 3098-3105).
Transient statistical energy analysis: A twosubsystem model to assess the validity of using steady-state coupling loss factors for plate radiation
Robinson, M., & Hopkins, C. (2011). Transient statistical energy analysis: A twosubsystem model to assess the validity of using steady-state coupling loss factors for plate radiation. In 18th International Congress on Sound and Vibration 2011, ICSV 2011 Vol. 2 (pp. 1517-1524).
Using the framework of Statistical Energy Analysis to incorporate tunneling mechanisms for bending wave transmission across a ribbed periodic plate
Yin, J., & Hopkins, C. (2011). Using the framework of Statistical Energy Analysis to incorporate tunneling mechanisms for bending wave transmission across a ribbed periodic plate. In 40th International Congress and Exposition on Noise Control Engineering 2011, INTER-NOISE 2011 Vol. 3 (pp. 2314-2321).
Using transient SEA to assess errors in the total loss factor determined from measured structural reverberation times in building acoustics
Hopkins, C., & Robinson, M. (2011). Using transient SEA to assess errors in the total loss factor determined from measured structural reverberation times in building acoustics. In 40th International Congress and Exposition on Noise Control Engineering 2011, INTER-NOISE 2011 Vol. 3 (pp. 2322-2329).
On the efficacy of spatial sampling using manual scanning paths to determine the spatial average sound pressure level in rooms
Hopkins, C. (2011). On the efficacy of spatial sampling using manual scanning paths to determine the spatial average sound pressure level in rooms. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 129(5), 3027-3034. doi:10.1121/1.3573986
Airborne sound transmission across a hybrid heavyweight-lightweight timber floor: Initial modelling using Statistical Energy Analysis
Churchill, C., Hopkins, C., & Krajci, L. (2011). Airborne sound transmission across a hybrid heavyweight-lightweight timber floor: Initial modelling using Statistical Energy Analysis. In EU COST Networks FP0702 and TU0901 - Symposium. Zurich: EMPA.
Revision of ISO Standards on field sound insulation testing
Hopkins, C. (2011). Revision of ISO Standards on field sound insulation testing. In EU COST Networks FP0702 and TU0901 - Symposium. Zurich: EMPA.
2010
DETERMINATION OF COUPLING LOSS FACTORS BETWEEN L-JUNCTIONS OF COUPLED HOMOGENOUS AND PERIODIC PLATES USING FINITE ELEMENT METHODS
Yin, J., & Hopkins, C. (2010). DETERMINATION OF COUPLING LOSS FACTORS BETWEEN L-JUNCTIONS OF COUPLED HOMOGENOUS AND PERIODIC PLATES USING FINITE ELEMENT METHODS. In PROCEEDINGS OF THE 17TH INTERNATIONAL CONGRESS ON SOUND AND VIBRATION. Retrieved from https://www.webofscience.com/
Prediction of maximum sound pressure and vibration levels in heavyweight building structures using transient statistical energy analysis
Robinson, M., & Hopkins, C. (2010). Prediction of maximum sound pressure and vibration levels in heavyweight building structures using transient statistical energy analysis. In 39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010 Vol. 2 (pp. 1242-1251).
The effectiveness of manual scanning measurements to determine the spatial average sound pressure level in rooms
Hopkins, C. (2010). The effectiveness of manual scanning measurements to determine the spatial average sound pressure level in rooms. In 39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010 Vol. 1 (pp. 525-534).
A reappraisal of the effects of constant percentage bandwidth filters used in field sound insulation measurements
Hopkins, C. (2010). A reappraisal of the effects of constant percentage bandwidth filters used in field sound insulation measurements. In Autumn Conference. Birmingham: Institute of Acoustics.
Collected papers in Building Acoustics: Room Acoustics and Environmental Noise
Gibbs, B., Goodchild, J., Hopkins, C., & Oldham, D. (Eds.) (2010). Collected papers in Building Acoustics: Room Acoustics and Environmental Noise. Brentwood: Multi-Science Publishing.
The efficacy of manual scanning paths in determining the room average sound pressure level
Hopkins, C. (2010). The efficacy of manual scanning paths in determining the room average sound pressure level. In Institute of Acoustics. The Royal Society, London: Institute of Acoustics.
2009
Influence of the physical test set-up and in-plane waves on the measurement of flexural wave coupling parameters between heavyweight building elements
Hopkins, C. (2009). Influence of the physical test set-up and in-plane waves on the measurement of flexural wave coupling parameters between heavyweight building elements. In 8th European Conference on Noise Control 2009, EURONOISE 2009 - Proceedings of the Institute of Acoustics Vol. 31.
Spatial sampling of sound pressure in rooms using manual scanning paths
Hopkins, C. (2009). Spatial sampling of sound pressure in rooms using manual scanning paths. In 8th European Conference on Noise Control 2009, EURONOISE 2009 - Proceedings of the Institute of Acoustics Vol. 31.
Hopkins, C. (2009). . Journal of Sound and Vibration, 327(1-2), 269-270. doi:10.1016/j.jsv.2009.06.018
Experimental statistical energy analysis of coupled plates with wave conversion at the junction
Hopkins, C. (2009). Experimental statistical energy analysis of coupled plates with wave conversion at the junction. JOURNAL OF SOUND AND VIBRATION, 322(1-2), 155-166. doi:10.1016/j.jsv.2008.10.025
Sound fields near building facades - comparison of finite and semi-infinite reflectors on a rigid ground plane
Hopkins, C., & Lam, Y. (2009). Sound fields near building facades - comparison of finite and semi-infinite reflectors on a rigid ground plane. APPLIED ACOUSTICS, 70(2), 300-308. doi:10.1016/j.apacoust.2008.03.008
Book review of 'Building Acoustics' by Prof. T.E. Vigran
Hopkins, C. (2009). Book review of 'Building Acoustics' by Prof. T.E. Vigran. Unknown Journal, 327(1-2), 269-270.
Collected Papers in Building Acoustics: Sound Transmission
Gibbs, B. M., Goodchild, J., Hopkins, A., & Oldham, D. (Eds.) (2009). Collected Papers in Building Acoustics: Sound Transmission. Brentwwod, Essex: Multi-Science Publ. Co. ltd..
Sound Absorption Characteristics of Porous Steel Manufactured by Lost Carbonate Sintering
Lu, M., Hopkins, C., Zhao, Y., & Seiffert, G. (2009). Sound Absorption Characteristics of Porous Steel Manufactured by Lost Carbonate Sintering. In ARCHITECTURE MULTIFUNCTIONAL MATERIALS Vol. 1188 (pp. 207-+). Retrieved from https://www.webofscience.com/
Sound insulation in timber-framed buildings - Improving the reliability and relevance of field measurements in the low-frequency range
Hopkins, C. (2009). Sound insulation in timber-framed buildings - Improving the reliability and relevance of field measurements in the low-frequency range. In Sound insulation and low-frequency vibration in timber-framed buildings. Vaxjo, Sweden: COST Action FP0702.
2008
Airborne sound transmission across solid homogeneous plates: A review of theory and practice for building acoustics applications
Hopkins, C. (2008). Airborne sound transmission across solid homogeneous plates: A review of theory and practice for building acoustics applications. In Proceedings of the Institute of Acoustics Vol. 30 (pp. 83-89).
Airborne sound transmission across solid homogeneous plates: A review of theory and practice for building acoustics applications
Hopkins, C. (2008). Airborne sound transmission across solid homogeneous plates: A review of theory and practice for building acoustics applications. In IoA Spring Conference Vol. 30 (pp. Pt 2). Reading: Institute of Acoustics.
Rain noise - reconciling artificial and real rainfall
Hopkins, C. (2008). Rain noise - reconciling artificial and real rainfall. In International Council for Research and Innnovation in Building and Construction (CIB) W51 Acoustics Conference. Boras: CIBWorld.
The Effect of Foundation Details and Soil Types on the Airborne Sound Insulation of Masonry Cavity Walls
Hopkins, C. (2008). The Effect of Foundation Details and Soil Types on the Airborne Sound Insulation of Masonry Cavity Walls. Building Acoustics, 15(1), 1-20. doi:10.1260/135101008784050205
The effects of wave conversion in Experimental Statistical Energy Analysis: Examples using plate junctions in buildings
Hopkins, C. (2008). The effects of wave conversion in Experimental Statistical Energy Analysis: Examples using plate junctions in buildings. In Internoise 08. Shanghai.
2007
Sound insulation
Hopkins, C. (2007). Sound insulation. Oxford: Elsevier.
2006
Impact Sound Insulation Using Timber Platform Floating Floors on a Concrete Floor Base
Hopkins, C., & Hall, R. (2006). Impact Sound Insulation Using Timber Platform Floating Floors on a Concrete Floor Base. Building Acoustics, 13(4), 273-284. doi:10.1260/135101006779320492
Impact sound insulation using timber platform floating floors on a concrete floor base
Hopkins, C., & Hall, R. (2006). Impact sound insulation using timber platform floating floors on a concrete floor base. In 2nd International Symposium on advanced Timber and Timber-Composite Elements for Buildings (COST E29). Biel: COST E29.
PD CEN/TR 15226:2006 Building products. Treatment of acoustics in product technical specifications
Hopkins, C., & Seller, J. (2006). PD CEN/TR 15226:2006 Building products. Treatment of acoustics in product technical specifications. CEN Standard.
Rain noise from glazed and lightweight roofing IP 2/06
Hopkins, C. (2006). Rain noise from glazed and lightweight roofing IP 2/06. BRE Information Paper.
2005
Field measurement of airborne sound insulation between rooms with non-diffuse sound fields at low frequencies
Hopkins, C., & Turner, P. (2005). Field measurement of airborne sound insulation between rooms with non-diffuse sound fields at low frequencies. APPLIED ACOUSTICS, 66(12), 1339-1382. doi:10.1016/j.apacoust.2005.04.005
Sound Measurements and Natural Ventilation in Schools
Andersen, A., & Hopkins, C. (2005). Sound Measurements and Natural Ventilation in Schools. International Journal of Ventilation, 4(1), 57-69. doi:10.1080/14733315.2005.11683699
2004
Airborne Sound Insulation of Beam and Block Floors: Direct and Flanking Transmission
Hopkins, C. (2004). Airborne Sound Insulation of Beam and Block Floors: Direct and Flanking Transmission. Building Acoustics, 11(1), 1-25. doi:10.1260/1351010041217211
Acoustics
Hopkins, C. (2004). Acoustics. In L. Watson, A. Wadsworth, R. Daniels, & G. Wonnacott (Eds.), Building Bulletin 81 Design and technology accomodation in secondary schools. A design guide (pp. 152-153). The Stationary Office, Norwich: Department for Education and Skills.
Aligning the aims of the new DfES Building Bulletin on natural ventilation with those of Building Bulletin 93 'Acoustic design of schools'
Hopkins, C. (2004). Aligning the aims of the new DfES Building Bulletin on natural ventilation with those of Building Bulletin 93 'Acoustic design of schools'. In Ventilation, indoor air quality and acoustics in schools. London: SCME.
2003
Vibration transmission between coupled plates using finite element methods and statistical energy analysis. Part 1: Comparison of measured and predicted data for masonry walls with and without apertures
Hopkins, C. (2003). Vibration transmission between coupled plates using finite element methods and statistical energy analysis. Part 1: Comparison of measured and predicted data for masonry walls with and without apertures. APPLIED ACOUSTICS, 64(10), 955-973. doi:10.1016/S0003-682X(03)00062-8
Vibration transmission between coupled plates using finite element methods and statistical energy analysis. Part 2: The effect of window apertures in masonry flanking walls
Hopkins, C. (2003). Vibration transmission between coupled plates using finite element methods and statistical energy analysis. Part 2: The effect of window apertures in masonry flanking walls. APPLIED ACOUSTICS, 64(10), 975-997. doi:10.1016/S0003-682X(03)00063-X
Direct and flanking sound transmission with beam and block floors
Hopkins, C. (2003). Direct and flanking sound transmission with beam and block floors. In Acta Acustica (Stuttgart) Vol. 89.
Acoustic design of schools - A design guide, DfES Building Bulletin 93
Shield, B., & Hopkins, C. (Eds.) (2003). Acoustic design of schools - A design guide, DfES Building Bulletin 93. London: Published for the Department for Education and Skills by The Stationery Office.
An investigation of the acoustic conditions in open-plan teaching areas and enclosed classrooms in a secondary school
Hall, R., & Hopkins, C. (2003). An investigation of the acoustic conditions in open-plan teaching areas and enclosed classrooms in a secondary school. In Autumn Conference Vol. 25 (pp. 162-169). Oxford: Institute of Acoustics.
Approved Document E - Resistance to the passage of sound
Fothergill, L. C., & Hopkins, C. (Eds.) (2003). Approved Document E - Resistance to the passage of sound. London: Published for the Office of the Deputy Prime Minister by The Stationery Office.
Part E time (Article on Building Regulations)
Hopkins, C., & Seller, J. (2003). Part E time (Article on Building Regulations). Builder and Engineer, (89), 30-32.
Various sections
Hopkins, C. (2003). Various sections. In B. Shield, & C. Hopkins (Eds.), Building Bulletin 93 Acoustic design of schools - A design guide. The Stationary Office, Norwich: Department for Education and Skills.
2002
Statistical energy analysis of coupled plate systems with low modal density and low modal overlap
Hopkins, C. (2002). Statistical energy analysis of coupled plate systems with low modal density and low modal overlap. JOURNAL OF SOUND AND VIBRATION, 251(2), 193-214. doi:10.1006/jsvi.2001.4002
Dealing with poor sound insulation between dwellings IP 14/02
Hopkins, C., & Seller, J. (2002). Dealing with poor sound insulation between dwellings IP 14/02. BRE Information Paper.
Laboratory measurement of the sound reduction index improvement by acoustical linings due only to resonant transmission
Hopkins, C. (2002). Laboratory measurement of the sound reduction index improvement by acoustical linings due only to resonant transmission. In Forum Acusticum 2002. Seville: Forum Acusticum.
New building regulations on the resistance to the passage of sound for England & Wales
Hopkins, C., Grimwood, C., Seller, J., Wright, P., Ling, M., & Fothergill, L. (2002). New building regulations on the resistance to the passage of sound for England & Wales. In Forum Acusticum 2002. Seville: Forum Acusticum.
2001
Breaking the sound barrier
Hall, R., & Hopkins, C. (2001). Breaking the sound barrier. Architects Journal, 34-35.
Dynamic stiffness of wall ties used in masonry cavity walls: Measurement procedure IP 3/01
Hall, R., & Hopkins, C. (2001). Dynamic stiffness of wall ties used in masonry cavity walls: Measurement procedure IP 3/01. BRE Information Paper.
The effect of wall ties in external cavity walls on the airborne sound insulation of solid separating walls
Hall, R., Hopkins, C., & Turner, P. (2001). The effect of wall ties in external cavity walls on the airborne sound insulation of solid separating walls. In ICA 2001. Rome: ICA.
Using sound intensity measurements to diagnose the causes of poor sound insulation
Turner, P., & Hopkins, C. (2001). Using sound intensity measurements to diagnose the causes of poor sound insulation. In Autumn Conference. Oxford: Institute of Acoustics.
2000
Application of FEM, ESEA and Monte Carlo methods to determine SEA coupling loss factors between concrete/masonry plates
Hopkins, C. (2000). Application of FEM, ESEA and Monte Carlo methods to determine SEA coupling loss factors between concrete/masonry plates. In Acoustics 2000 Research into practice. Liverpool: Institute of Acoustics.
Determination of SEA coupling loss factors between concrete/masonry plates using FEM and ESEA
Hopkins, C. (2000). Determination of SEA coupling loss factors between concrete/masonry plates using FEM and ESEA. In Internoise 2000. Nice: Internoise.
Quieter homes
Grimwood, C., & Hopkins, C. (2000). Quieter homes. In NSCA Seminar, Noise Update 2000. Birmingham: NSCA.
Structure-borne sound transmission between coupled plates
Hopkins, C. (2000). Structure-borne sound transmission between coupled plates. (PhD Thesis, Heriot-Watt University).
The National Noise Incidence Study 2000 (England and Wales): 1.2m and 4m assessment heights
Hopkins, C., Skinner, C., & Grimwood, C. (2000). The National Noise Incidence Study 2000 (England and Wales): 1.2m and 4m assessment heights. London: Department for Environment, Food and Rural Affairs. Retrieved from http://www.defra.gov.uk/environment/noise/research/nis0001/pdf/nis_4m.pdf
1999
Measurement of the Vibration Reduction Index, K<sub>ij</sub> on Free-Standing Masonry Wall Constructions
Hopkins, C. (1999). Measurement of the Vibration Reduction Index, K<sub>ij</sub> on Free-Standing Masonry Wall Constructions. Building Acoustics, 6(3), 235-257. doi:10.1260/1351010991501437
Building acoustics measurements
Hopkins, C. (1999). Building acoustics measurements. In Institute of Acoustics 25th anniversary conference Vol. 21 (pp. 9-16). London: Institute of Acoustics.
Dynamic stiffness as an acoustic specification parameter for wall ties used in masonry cavity walls
Hopkins, C., Wilson, R., & Craik, R. J. M. (1999). Dynamic stiffness as an acoustic specification parameter for wall ties used in masonry cavity walls. APPLIED ACOUSTICS, 58(1), 51-68. doi:10.1016/S0003-682X(98)00068-1
Measurement of Kij with free-standing masonry walls
Hopkins, C. (1999). Measurement of Kij with free-standing masonry walls. In Joint EAA/ASA meeting - Forum Acusticum 1999. Berlin: EAA/ASA.
Measurement of the vibration reduction index, Kij on free-standing masonry wall constructions
Hopkins, C. (1999). Measurement of the vibration reduction index, Kij on free-standing masonry wall constructions. Building Acoustics, 6(3&4), 235-257.
The distribution and measurement of sound pressure levels in dwellings at low frequencies
Turner, P., Hopkins, C., & Vasudevan, R. (1999). The distribution and measurement of sound pressure levels in dwellings at low frequencies. In Institute of Acoustics Vol. 21 (pp. 67-74). Windermere: Institute of Acoustics.
1998
Dynamic stiffness of wall ties used in masonry cavity walls
Hopkins, C., Wilson, R., & Craik, R. J. M. (1998). Dynamic stiffness of wall ties used in masonry cavity walls. In Euronoise 98 (pp. 687-692). Munich: Euronoise.
Measurement of Kij with free-standing masonry walls
Hopkins, C. (1998). Measurement of Kij with free-standing masonry walls. In CIB Working Group 51 Conference. Paris: CIB.
1997
Dynamic stiffness as an acoustic specification parameter for wall ties used in masonry cavity walls
Hopkins, C., Wilson, R., & Craik, R. J. M. (1997). Dynamic stiffness as an acoustic specification parameter for wall ties used in masonry cavity walls. In INSTITUTE OF ACOUSTICS, PROCEEDINGS, VOL 19, PT 8 1997 Vol. 19 (pp. 97-109). Retrieved from https://www.webofscience.com/
Energy flow measurement between walls containing a window aperture
Hopkins, C. (1997). Energy flow measurement between walls containing a window aperture. In INSTITUTE OF ACOUSTICS, PROCEEDINGS, VOL 19, PT 8 1997 Vol. 19 (pp. 261-266). Retrieved from https://www.webofscience.com/
Measurement of vibration transmission between walls with a window aperture
Hopkins, C. (1997). Measurement of vibration transmission between walls with a window aperture. In Internoise 97 (pp. 731-734). Budapest: Internoise.
Sound insulation measurements with intensity techniques: Flanking transmission
Hopkins, C. (1997). Sound insulation measurements with intensity techniques: Flanking transmission. In Sound intensity - Theory and practise. Watford: Institute of Acoustics.
Sound transmission across a separating and flanking cavity wall construction
Hopkins, C. (1997). Sound transmission across a separating and flanking cavity wall construction. Applied Acoustics, 52(3/4), 259-272.
Sound transmission across a separating and flanking cavity wall construction
Hopkins, C. (1997). Sound transmission across a separating and flanking cavity wall construction. APPLIED ACOUSTICS, 52(3-4), 259-272. doi:10.1016/S0003-682X(97)00030-3
1996
Sound intensity measurements for building acoustics
Hopkins, C. P., & Emmanuel, T. A. (1996). Sound intensity measurements for building acoustics. Acoustics Bulletin, 21(4).
Intensity measurements for building acoustics
Hopkins, C., & Emmanuel, T. (1996). Intensity measurements for building acoustics. In Sound insulation: The law, the science and in-practise (pp. 21-27). Watford: Institute of Acoustics.
Prediction of sound transmission across cavity walls in the BRE Flanking Laboratory using statistical energy analysis.
Hopkins, C. (1996). Prediction of sound transmission across cavity walls in the BRE Flanking Laboratory using statistical energy analysis.. In ACUSTICA Vol. 82 (pp. S111). Retrieved from https://www.webofscience.com/
1995
Cavity wall sound transmission in the BRE Flanking Laboratory: Measurements and predictions using Statistical Energy Analysis
Hopkins, C. (1995). Cavity wall sound transmission in the BRE Flanking Laboratory: Measurements and predictions using Statistical Energy Analysis. In Autumn Conference Vol. 17 (pp. 37-45). Windermere: Institute of Acoustics.
1993
Prediction of sound transmission in the BRE Flanking Laboratory using SEA
Hopkins, C. (1993). Prediction of sound transmission in the BRE Flanking Laboratory using SEA. In Autumn Conference (pp. 275-281). Windermere: Institute of Acoustics.