2024
Tan, Y., Ali, M., Lin, F., Su, Z., Liao, W. -H., & Wong, H. (2024). Study on laser spot size measurement by scanning-slit method based on back-injection interferometry. Optics & Laser Technology, 172, 110472. doi:10.1016/j.optlastec.2023.110472DOI: 10.1016/j.optlastec.2023.110472
Ali, M., Tan, Y., Lin, F., Su, Z., Liao, W. -H., & Wong, H. (n.d.). Pilot design of experiment study: effect of stirring duration and guest particle loading on electrostatic adsorption of Ti-6Al-4V composite powder formation. The International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-023-12788-xDOI: 10.1007/s00170-023-12788-x
2023
Development of a novel beam profiling prototype with laser self-mixing via the knife-edge approach (Journal article)
Tan, Y., Lin, F., Ali, M., Su, Z., & Wong, H. (2023). Development of a novel beam profiling prototype with laser self-mixing via the knife-edge approach. OPTICS AND LASERS IN ENGINEERING, 169. doi:10.1016/j.optlaseng.2023.107696DOI: 10.1016/j.optlaseng.2023.107696
Lin, F., Ali, M., Tan, Y., Su, Z., & Wong, H. (2023). Laser offline measurement method based on self-mixing interference for thin-wall fused deposition modelling component. JOURNAL OF MANUFACTURING PROCESSES, 102, 131-142. doi:10.1016/j.jmapro.2023.07.041DOI: 10.1016/j.jmapro.2023.07.041
Tan, Y., & Wong, H. (2023). Development of a novel beam profiling prototype with laser self-mixing via the knife-edge approach. In A. Dudley, & A. V. Laskin (Eds.), Laser Beam Shaping XXIII. SPIE. doi:10.1117/12.2681594DOI: 10.1117/12.2681594
2020
Wong, H. (2020). Pilot investigation of surface-tilt and gas amplification induced contrast during electronic imaging for potential in-situ electron beam melting monitoring. Additive Manufacturing. doi:10.1016/j.addma.2020.101325DOI: 10.1016/j.addma.2020.101325
Wong, H. (n.d.). Bitmap generation from computer-aided design for potential layer-quality evaluation in electron beam additive manufacturing. Rapid Prototyping Journal. doi:10.1108/RPJ-05-2019-0146DOI: 10.1108/RPJ-05-2019-0146
Wong, H., Garrard, R., Black, K., Fox, P., & Sutcliffe, C. (2020). Material characterisation using electronic imaging for Electron Beam Melting process monitoring. MANUFACTURING LETTERS, 23, 44-48. doi:10.1016/j.mfglet.2019.12.005DOI: 10.1016/j.mfglet.2019.12.005
2019
Wong, H., Dawson, K., Ravi, G. A., Howlett, L., Jones, R. O., & Sutcliffe, C. J. (2019). Multi-Laser Powder Bed Fusion Benchmarking-Initial Trials with Inconel 625. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 105(7-8), 2891-2906. doi:10.1007/s00170-019-04417-3DOI: 10.1007/s00170-019-04417-3
Wong, H., Neary, D., Jones, E., Fox, P., & Sutcliffe, C. (2019). Benchmarking spatial resolution in electronic imaging for potential in-situ Electron Beam Melting monitoring. ADDITIVE MANUFACTURING, 29. doi:10.1016/j.addma.2019.100829DOI: 10.1016/j.addma.2019.100829
Wong, H., Neary, D., Jones, E., Fox, P., & Sutcliffe, C. (2019). Pilot feedback electronic imaging at elevated temperatures and its potential for in-process electron beam melting monitoring. ADDITIVE MANUFACTURING, 27, 185-198. doi:10.1016/j.addma.2019.02.022DOI: 10.1016/j.addma.2019.02.022
Wong, H., Neary, D., Shahzad, S., Jones, E., Fox, P., & Sutcliffe, C. (2019). Pilot investigation of feedback electronic image generation in electron beam I melting and its potential for in-process monitoring. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 266, 502-517. doi:10.1016/j.jmatprotec.2018.10.016DOI: 10.1016/j.jmatprotec.2018.10.016
Wong, H., Neary, D., Jones, E., Fox, P., & Sutcliffe, C. (2019). Pilot capability evaluation of a feedback electronic imaging system prototype for in-process monitoring in electron beam additive manufacturing. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 100(1-4), 707-720. doi:10.1007/s00170-018-2702-6DOI: 10.1007/s00170-018-2702-6