2022
Industry 4.0: A Review of Digital Retrofitting Solutions for Legacy Manufacturing Systems (Conference Paper)
Alqoud, A., Schaefer, D., & Milisavljevic-Syed, J. (2022). Industry 4.0: A Review of Digital Retrofitting Solutions for Legacy Manufacturing Systems. IOS Press. doi:10.3233/atde220557DOI: 10.3233/atde220557
Industry 4.0: Challenges and Opportunities of Digitalisation Manufacturing Systems (Conference Paper)
Alqoud, A., Schaefer, D., & Milisavljevic-Syed, J. (2022). Industry 4.0: Challenges and Opportunities of Digitalisation Manufacturing Systems. IOS Press. doi:10.3233/atde220560DOI: 10.3233/atde220560
Maturity Model Development for Digital Servitization of Manufacturing SMEs (Conference Paper)
Khan, M., Schaefer, D., & Milisavljevic-Syed, J. (2022). Maturity Model Development for Digital Servitization of Manufacturing SMEs. IOS Press. doi:10.3233/atde220567DOI: 10.3233/atde220567
Utilising Digital Twins for Increasing Military Supply Chain Visibility (Conference Paper)
Sani, S., Schaefer, D., & Milisavljevic-Syed, J. (2022). Utilising Digital Twins for Increasing Military Supply Chain Visibility. IOS Press. doi:10.3233/atde220595DOI: 10.3233/atde220595
Alqoud, A., Schaefer, D., & Milisavljevic-Syed, J. (2022). Industry 4.0: a systematic review of legacy manufacturing system digital retrofitting. MANUFACTURING REVIEW, 9. doi:10.1051/mfreview/2022031DOI: 10.1051/mfreview/2022031
Challenges and Research Directions in Crowdsourcing for Engineering Design: An Interview Study With Industry Professionals (Journal article)
Shergadwala, M., Forbes, H., Schaefer, D., & Panchal, J. H. (2022). Challenges and Research Directions in Crowdsourcing for Engineering Design: An Interview Study With Industry Professionals. IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT, 69(4), 1592-1604. doi:10.1109/TEM.2020.2983551DOI: 10.1109/tem.2020.2983551
Supply Chain Management 4.0: Looking Backward, Looking Forward (Conference Paper)
Khan, M. D., Schaefer, D., & Milisavljevic-Syed, J. (2022). Supply Chain Management 4.0: Looking Backward, Looking Forward. In M. D. Khan (Ed.), Procedia CIRP Vol. 107 (pp. 9-14). Lugano, Switzerland. doi:10.1016/j.procir.2022.04.002DOI: 10.1016/j.procir.2022.04.002
Evans, R., & Schaefer, D. (2022). Guest Editorial: Open Innovation and Social Product Development. IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT, 69(2), 283-286. doi:10.1109/TEM.2021.3100971DOI: 10.1109/TEM.2021.3100971
Wang, K., Guo, F., Zhang, C., Hao, J., & Schaefer, D. (2022). Digital Technology in Architecture, Engineering, and Construction (AEC) Industry: Research Trends and Practical Status toward Construction 4.0. In CONSTRUCTION RESEARCH CONGRESS 2022: PROJECT MANAGEMENT AND DELIVERY, CONTRACTS, AND DESIGN AND MATERIALS (pp. 983-992). Retrieved from https://www.webofscience.com/
Li, J., Schaefer, D., & Milisavljevic-Syed, J. (2022). A Decision-Based Framework for Predictive Maintenance Technique Selection in Industry 4.0. Procedia CIRP, 107, 77-82. doi:10.1016/j.procir.2022.04.013DOI: 10.1016/j.procir.2022.04.013
Khan, M. D., Schaefer, D., & Milisavljevic-Syed, J. (2022). A Review of Distributed Ledger Technologies in the Machine Economy: Challenges and Opportunities in Industry and Research. Procedia CIRP, 107, 1168-1173. doi:10.1016/j.procir.2022.05.126DOI: 10.1016/j.procir.2022.05.126
2021
Alqoud, A., Schaefer, D., & Milisavljevic Syed, J. (2021). Industry 4.0: Retrofitting of Legacy MAchines for Smart Manufacturing. The Manufacturer PR Services. Retrieved from https://pr.themanufacturer.com/
Han, J., Forbes, H., & Schaefer, D. (2021). An exploration of how creativity, functionality, and aesthetics are related in design. RESEARCH IN ENGINEERING DESIGN, 32(3), 289-307. doi:10.1007/s00163-021-00366-9DOI: 10.1007/s00163-021-00366-9
Jiao, R., Commuri, S., Panchal, J., Milisavljevic-Syed, J., Allen, J. K., Mistree, F., & Schaefer, D. (2021). Design Engineering in the Age of Industry 4.0. JOURNAL OF MECHANICAL DESIGN, 143(7). doi:10.1115/1.4051041DOI: 10.1115/1.4051041
Special Issue: Design Engineering in the Age of Industry 4.0 (Journal article)
Allen, J. K., Commuri, S., Jiao, R., Milisavljevic-Syed, J., Mistree, F., Panchal, J., & Schaefer, D. (2021). Special Issue: Design Engineering in the Age of Industry 4.0. JOURNAL OF MECHANICAL DESIGN, 143(7). doi:10.1115/1.4051042DOI: 10.1115/1.4051042
2020
Forbes, H., Han, J., & Schaefer, D. (2020). A Crowdsourcing Data-Driven Approach for Innovation. The International Journal of Systematic Innovation, 6(2)(2020), 9-19.
A Computational Approach for Using Social Networking Platforms to Support Creative Idea Generation (Journal article)
Han, J., Park, D., Forbes, H., & Schaefer, D. (2020). A Computational Approach for Using Social Networking Platforms to Support Creative Idea Generation. Procedia CIRP, 91(2020), 382. doi:10.1016/j.procir.2020.02.190DOI: 10.1016/j.procir.2020.02.190
Forbes, H., Shaefer, D., Shergadwala, M. N., & Panchal, J. H. (2020). Investigating the Challenges of Crowdsourcing for Engineering Design: An Interview Study With Organizations of Different Sizes. In Volume 8: 32nd International Conference on Design Theory and Methodology (DTM). American Society of Mechanical Engineers. doi:10.1115/detc2020-22466DOI: 10.1115/detc2020-22466
Special Issue: Design Engineering in the Age of Industry 4.0 (Journal article)
Chen, W. (2020). Special Issue: Design Engineering in the Age of Industry 4.0. Journal of Mechanical Design, 142(8). doi:10.1115/1.4047348DOI: 10.1115/1.4047348
Virtual Learning Environments for Manufacturing (Chapter)
Manesh, H. F., & Schaefer, D. (n.d.). Virtual Learning Environments for Manufacturing. In Gaming and Simulations (pp. 1597-1618). IGI Global. doi:10.4018/978-1-60960-195-9.ch609DOI: 10.4018/978-1-60960-195-9.ch609
Mourad, M., Nassehi, A., Schaefer, D., & Newman, S. (2020). Assessment of Interoperability in Cloud Manufacturing. Robotics and Computer Integrated Manufacturing, 61. doi:10.1016/j.rcim.2019.101832DOI: 10.1016/j.rcim.2019.101832
A DATA-DRIVEN APPROACH FOR CREATIVE CONCEPT GENERATION AND EVALUATION (Conference Paper)
Han, J., Forbes, H., Shi, F., Hao, J., & Schaefer, D. (2020). A DATA-DRIVEN APPROACH FOR CREATIVE CONCEPT GENERATION AND EVALUATION. In Proceedings of the Design Society: DESIGN Conference Vol. 1 (pp. 167-176). Cambridge University Press (CUP). doi:10.1017/dsd.2020.5DOI: 10.1017/dsd.2020.5
Forbes, H., Han, J., & Schaefer, D. (2020). A crowdsourcing data-driven approach for innovation. International Journal of Systematic Innovation, 6(2), 9-19.
Dong, F., Sterling, S., Schaefer, D., & Forbes, H. (2020). BUILDING THE HISTORY OF THE FUTURE: A TOOL FOR CULTURE-CENTRED DESIGN FOR THE SPECULATIVE FUTURE. In Proceedings of the Design Society: DESIGN Conference Vol. 1 (pp. 1883-1890). Cambridge University Press (CUP). doi:10.1017/dsd.2020.63DOI: 10.1017/dsd.2020.63
Forbes, H., Schaefer, D., Han, J., & De Oliveira, F. B. (2020). Investigating Factors Influential on the Success of Social Product Development initiatives. Procedia CIRP, 91, 107-112. doi:10.1016/j.procir.2020.02.155DOI: 10.1016/j.procir.2020.02.155
de Oliveira, F. B., Forbes, H., Schaefer, D., & Syed, J. M. (2020). Lean Principles in Vertical Farming: A Case Study. Procedia CIRP, 93, 712-717. doi:10.1016/j.procir.2020.03.017DOI: 10.1016/j.procir.2020.03.017
The Digitization of Design and Manufacturing: A State-of-the-Art Report on the Transition from Strategic Vision to Implementation in Industry (Journal article)
Milisavljevic-Syed, J., Thames, J. L., & Schaefer, D. (2020). The Digitization of Design and Manufacturing: A State-of-the-Art Report on the Transition from Strategic Vision to Implementation in Industry. Procedia CIRP, 93, 575-580. doi:10.1016/j.procir.2020.03.088DOI: 10.1016/j.procir.2020.03.088
Bause, M. F., Forbes, H., Nickpour, F., & Schaefer, D. (2020). Towards a Health 4.0 Framework for the Design of Wearables: Leveraging Human-Centered and Robust Design. Procedia CIRP, 91, 639-645. doi:10.1016/j.procir.2020.02.222DOI: 10.1016/j.procir.2020.02.222
USING CROWDFUNDING AS PART OF THE PRODUCT DEVELOPMENT PROCESS (Conference Paper)
Forbes, H., Han, J., & Schaefer, D. (2020). USING CROWDFUNDING AS PART OF THE PRODUCT DEVELOPMENT PROCESS. In Proceedings of the Design Society: DESIGN Conference Vol. 1 (pp. 1245-1254). Cambridge University Press (CUP). doi:10.1017/dsd.2020.256DOI: 10.1017/dsd.2020.256
2019
Forbes, H., Schaefer, D., Panchal, J., & Han, J. (2019). A Design Framework for Social Product Development. IEEE Transactions on Engineering Management, 1-12. doi:10.1109/tem.2019.2948996DOI: 10.1109/tem.2019.2948996
Li, Z., Guo, F., & Schaefer, D. (2020). SWOT analysis for using BIM for infrastructure across the whole lifecycle of transportation projects. In SUSTAINABLE BUILDINGS AND STRUCTURES: BUILDING A SUSTAINABLE TOMORROW (pp. 351-359). Retrieved from https://www.webofscience.com/
Design Education Today Technical Contexts, Programs and Best Practices (Book)
Schaefer, D., Coates, G., & Eckert, C. (2019). Design Education Today Technical Contexts, Programs and Best Practices. Springer.
Khayamian Esfahani, B., Bause, M., & Schaefer, D. (2019). Heatlh 4.0: How Digitisation Drives Innovation in the Healthcare Sector. In The 2019 International Conference on Systematic Innovation (ICIS). Liverpool, UK.
Forbes, H., Han, J., & Schaefer, D. (2019). Exploring a Social Media Crowdsourcing Data-Driven Approach for Innovation. In Proceedings of the International Conference on Systematic Innovation. Liverpool.
Fog Computing as a Complementary Approach to Cloud Computing (Conference Paper)
Al Yami, M., & Schaefer, D. (2019). Fog Computing as a Complementary Approach to Cloud Computing. In 2019 INTERNATIONAL CONFERENCE ON COMPUTER AND INFORMATION SCIENCES (ICCIS) (pp. 152-155). doi:10.1109/iccisci.2019.8716402DOI: 10.1109/iccisci.2019.8716402
Schaefer, D., & Forbes, H. (2019). Industry 4.0 - Social Product Development Finding Its Way. Steel Times International, 43(2), 40-44.
Schaefer, D., & Forbes, H. L. (2019). SPD finds its way. Steel Times International, 43(2).
Han, J., Forbes, H., & Schaefer, D. (2019). An Exploration of the Relations between Functionality, Aesthetics and Creativity in Design. In Proceedings of the Design Society: International Conference on Engineering Design Vol. 1 (pp. 259-268). Cambridge University Press (CUP). doi:10.1017/dsi.2019.29DOI: 10.1017/dsi.2019.29
Han, J., & Schaefer, D. (2019). An Ontology for Supporting Digital Manufacturability Analysis. 52ND CIRP CONFERENCE ON MANUFACTURING SYSTEMS (CMS), 81, 850-855. doi:10.1016/j.procir.2019.03.211DOI: 10.1016/j.procir.2019.03.211
Design for Health 4.0: Exploration of a New Area (Conference Paper)
Bause, M., Khayamian Esfahani, B., Forbes, H., & Schaefer, D. (2019). Design for Health 4.0: Exploration of a New Area. In Proceedings of the Design Society: International Conference on Engineering Design Vol. 1 (pp. 887-896). Cambridge University Press (CUP). doi:10.1017/dsi.2019.93DOI: 10.1017/dsi.2019.93
2018
Interpolation mittels lokaler Interpolierender und Blendetechniken (Book)
Schaefer, D. (2018). Interpolation mittels lokaler Interpolierender und Blendetechniken. Shaker Verlag. Retrieved from https://www.shaker.de/
Cloud Manufacturing as a new type of Product-Service System (Journal article)
Charro, A., & Schaefer, D. (2018). Cloud Manufacturing as a new type of Product-Service System. International Journal of Computer Integrated Manufacturing, 31(10), 1018-1033. doi:10.1080/0951192X.2018.1493228DOI: 10.1080/0951192X.2018.1493228
Flynn, J., & Schaefer, D. (2018). Industry 4.0: Educating the Workforce of Tomorrow. In Steel Times International Vol. 42 (pp. 32-33). Warsaw, Poland: DMG world Media Ltd. Retrieved from https://issuu.com/quartzbusinessmedia/docs/steel_times_international_july_augu
Special issue on "Cyber-physical product creation for Industry 4.0' (Journal article)
Nassehi, A., Schaefer, D., Wu, D., Xu, X., & Zaeh, M. (2018). Special issue on "Cyber-physical product creation for Industry 4.0'. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 31(7), 611. doi:10.1080/0951192X.2018.1482106DOI: 10.1080/0951192X.2018.1482106
Flynn, J., & Schaefer, D. (2018). Educating the workforce of tomorrow. Steel Times International, 42(5), 32-33.
Schaefer, D., & Cheung, W. -M. (2018). Smart Packaging: Opportunities and Challenges. Procedia CIRP. doi:10.1016/j.procir.2018.03.240DOI: 10.1016/j.procir.2018.03.240
Schaefer, D., & Forbes, H. (2018). Open Innovation and Social Product Development. In Steel Times International (pp. 54-58). Warsaw, Poland: DMG world Media Ltd.
Forbes, H., & Schaefer, D. (2018). Crowdsourcing in Product Development: Current State and Future Research Directions. In International Design Conference - DESIGN 2018 (pp. 579-588). Dubrovnik, Croatia.
Schaefer, D. (2018). Radicali cambiamenti in corso: Uno dei saggi classici su Industry 4.0 che vale la pena di leggere con attenzione. Industrie 4.0, (2/2018), 70-77.
Forbes, H., & Schaefer, D. (2018, May 21). Crowdsourcing in Product Development: Current Status and Future Research Directions. In International Design Conference - DESIGN 2018. Dubrovnik, Croatia.
Exploring the impact of functional terms on idea generation in design (Conference Paper)
Hao, J., Wang, L., Han, J., & Schaefer, D. (2018). Exploring the impact of functional terms on idea generation in design. In Proceedings of International Conference on Computers and Industrial Engineering, CIE Vol. 2018-December.
2017
Cybersecurity for Industry 4.0 Analysis for Design and Manufacturing (Book)
Thames, L., & Schaefer, D. (2017). Cybersecurity for Industry 4.0 Analysis for Design and Manufacturing Preface. Retrieved from https://www.webofscience.com/
Digital Design and Manufacturing on the Cloud: A Review of Software and Services - RETRACTION (Retraction of Vol 31, Pg 104, 2016) (Journal article)
Wu, D., Terpenny, J., & Schaefer, D. (2020). Digital Design and Manufacturing on the Cloud: A Review of Software and Services - RETRACTION (Retraction of Vol 31, Pg 104, 2016). AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING, 34(1), 127. doi:10.1017/S0890060420000074DOI: 10.1017/S0890060420000074
A Data-Driven Business Model Framework for Value Capture in Industry 4.0 (Conference Paper)
Schaefer, D., Walker, J., & Flynn, J. (2017). A Data-Driven Business Model Framework for Value Capture in Industry 4.0. In ADVANCES IN MANUFACTURING TECHNOLOGY XXXI Vol. 6 (pp. 245-250). doi:10.3233/978-1-61499-792-4-245DOI: 10.3233/978-1-61499-792-4-245
C-MARS-ABM: A Deployment Approach for Cloud Manufacturing (Conference Paper)
Mourad, M., Nassehi, A., Newman, S., & Schaefer, D. (2017). C-MARS-ABM: A Deployment Approach for Cloud Manufacturing. In ADVANCES IN MANUFACTURING TECHNOLOGY XXXI Vol. 6 (pp. 213-218). doi:10.3233/978-1-61499-792-4-213DOI: 10.3233/978-1-61499-792-4-213
Cybersecurity for Industry 4.0 and Advanced Manufacturing Environments with Ensemble Intelligence (Chapter)
Thames, L., & Schaefer, D. (2017). Cybersecurity for Industry 4.0 and Advanced Manufacturing Environments with Ensemble Intelligence. In CYBERSECURITY FOR INDUSTRY 4.0: ANALYSIS FOR DESIGN AND MANUFACTURING (pp. 243-265). doi:10.1007/978-3-319-50660-9_10DOI: 10.1007/978-3-319-50660-9_10
Guidelines for Successful Crowdfunding (Journal article)
Forbes, H., & Schaefer, D. (2017). Guidelines for Successful Crowdfunding. COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT, 60, 398-403. doi:10.1016/j.procir.2017.02.021DOI: 10.1016/j.procir.2017.02.021
Industry 4.0 - A Holistic Perspective (Conference Paper)
Schaefer, D. (2017). Industry 4.0 - A Holistic Perspective. In Future Steel Forum 2017. Warsaw, Poland.
Industry 4.0 and Its Potential Impact on Employment Demographics in the UK (Conference Paper)
Flynn, J., Dance, S., & Schaefer, D. (2017). Industry 4.0 and Its Potential Impact on Employment Demographics in the UK. In ADVANCES IN MANUFACTURING TECHNOLOGY XXXI Vol. 6 (pp. 239-244). doi:10.3233/978-1-61499-792-4-239DOI: 10.3233/978-1-61499-792-4-239
Industry 4.0: An Overview of Key Benefits, Technologies, and Challenges (Chapter)
Thames, L., & Schaefer, D. (2017). Industry 4.0: An Overview of Key Benefits, Technologies, and Challenges. In CYBERSECURITY FOR INDUSTRY 4.0: ANALYSIS FOR DESIGN AND MANUFACTURING (pp. 1-33). doi:10.1007/978-3-319-50660-9_1DOI: 10.1007/978-3-319-50660-9_1
Goguelin, S., Colaco, J., Dhokia, V., & Schaefer, D. (2017). Smart Manufacturability Analysis for Digital Product Development. COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT, 60, 56-61. doi:10.1016/j.procir.2017.02.026DOI: 10.1016/j.procir.2017.02.026
Forbes, H., & Schaefer, D. (2017). Social Product Development: The Democratization of Design, Manufacture and Innovation. COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT, 60, 404-409. doi:10.1016/j.procir.2017.02.029DOI: 10.1016/j.procir.2017.02.029
2016
A Survey of Cloud-Based Design and Engineering Analysis Software Tools (Conference Paper)
Wu, D., Terpenny, J., & Schaefer, D. (2016). A Survey of Cloud-Based Design and Engineering Analysis Software Tools. In PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2016, VOL 1A. Retrieved from https://www.webofscience.com/
Understanding Communication and Collaboration in Social Product Development Through Social Network Analysis (Journal article)
Wu, D., Rosen, D. W., Panchal, J. H., & Schaefer, D. (2016). Understanding Communication and Collaboration in Social Product Development Through Social Network Analysis. Journal of Computing and Information Science in Engineering, 16(1). doi:10.1115/1.4031890DOI: 10.1115/1.4031890
Interoperability as a key enabler for manufacturing in the cloud (Journal article)
Mourad, M., Nassehi, A., & Schaefer, D. (2016). Interoperability as a key enabler for manufacturing in the cloud. SIXTH INTERNATIONAL CONFERENCE ON CHANGEABLE, AGILE, RECONFIGURABLE AND VIRTUAL PRODUCTION (CARV2016), 52, 30-34. doi:10.1016/j.procir.2016.07.051DOI: 10.1016/j.procir.2016.07.051
On Servitization of the Manufacturing Industry in the UK (Journal article)
Huxtable, J., & Schaefer, D. (2016). On Servitization of the Manufacturing Industry in the UK. SIXTH INTERNATIONAL CONFERENCE ON CHANGEABLE, AGILE, RECONFIGURABLE AND VIRTUAL PRODUCTION (CARV2016), 52, 46-51. doi:10.1016/j.procir.2016.07.042DOI: 10.1016/j.procir.2016.07.042
Software-Defined Cloud Manufacturing for Industry 4.0 (Journal article)
Thames, L., & Schaefer, D. (2016). Software-Defined Cloud Manufacturing for Industry 4.0. SIXTH INTERNATIONAL CONFERENCE ON CHANGEABLE, AGILE, RECONFIGURABLE AND VIRTUAL PRODUCTION (CARV2016), 52, 12-17. doi:10.1016/j.procir.2016.07.041DOI: 10.1016/j.procir.2016.07.041
2015
Scalability Planning for Cloud-Based Manufacturing Systems (Journal article)
Wu, D., Rosen, D. W., & Schaefer, D. (2015). Scalability Planning for Cloud-Based Manufacturing Systems. Journal of Manufacturing Science and Engineering, 137(4). doi:10.1115/1.4030266DOI: 10.1115/1.4030266
Dynamic modeling of an autonomous underwater vehicle (Journal article)
Wang, C., Zhang, F., & Schaefer, D. (2015). Dynamic modeling of an autonomous underwater vehicle. Journal of Marine Science and Technology, 20, 199-212. doi:10.1007/s00773-014-0259-0DOI: 10.1007/s00773-014-0259-0
Cloud-based design and manufacturing: A new paradigm in digital manufacturing and design innovation (Journal article)
Wu, D., Rosen, D. W., Wang, L., & Schaefer, D. (2015). Cloud-based design and manufacturing: A new paradigm in digital manufacturing and design innovation. COMPUTER-AIDED DESIGN, 59, 1-14. doi:10.1016/j.cad.2014.07.006DOI: 10.1016/j.cad.2014.07.006
Training Engineering Faculty to be Educators: History, Motivations and a Comparison of US and International Systems (Conference Paper)
Visco, D., & Schaefer, D. (2015, June 14). Training Engineering Faculty to be Educators: History, Motivations and a Comparison of US and International Systems. In 2015 ASEE Annual Conference and Exposition Proceedings. ASEE Conferences. doi:10.18260/p.24932DOI: 10.18260/p.24932
2014
Product Development in the Socio-sphere: Game Changing Paradigms for 21st Century Breakthrough Product Development and Innovation (Book)
Schaefer, D. (Ed.) (2014). Product Development in the Socio-sphere: Game Changing Paradigms for 21st Century Breakthrough Product Development and Innovation. Springer.
Modeling and Analyzing the Material Flow of Crowdsourcing Processes in Cloud-Based Manufacturing Systems Using Stochastic Petri Nets (Conference Paper)
Wu, D., Rosen, D. W., & Schaefer, D. (2014). Modeling and Analyzing the Material Flow of Crowdsourcing Processes in Cloud-Based Manufacturing Systems Using Stochastic Petri Nets. In PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 1. Retrieved from https://www.webofscience.com/
Cloud-Based Design and Manufacturing (CBDM) (Book)
Schaefer, D. (Ed.) (2014). Cloud-Based Design and Manufacturing (CBDM). Springer International Publishing. doi:10.1007/978-3-319-07398-9DOI: 10.1007/978-3-319-07398-9
Cloud-Based Design and Manufacturing (CBDM): A Service-Oriented Product Development Paradigm for the 21st Century (Book)
Schaefer, D. (Ed.) (2014). Product Development in the Socio-sphere. Springer International Publishing. doi:10.1007/978-3-319-07404-7DOI: 10.1007/978-3-319-07404-7
Cloud-Based Design and Manufacturing: Status and Promise (Chapter)
Wu, D., Rosen, D. W., & Schaefer, D. (2014). Cloud-Based Design and Manufacturing: Status and Promise. In Cloud-Based Design and Manufacturing (CBDM) (pp. 1-24). Springer International Publishing. doi:10.1007/978-3-319-07398-9_1DOI: 10.1007/978-3-319-07398-9_1
First Year Computer Science and IT Students' Experience of Participation in the Discipline (Conference Paper)
Peters, A. -K., Berglund, A., Eckerdal, A., & Pears, A. (2014). First Year Computer Science and IT Students' Experience of Participation in the Discipline. In 2014 INTERNATIONAL CONFERENCE ON TEACHING AND LEARNING IN COMPUTING AND ENGINEERING (LATICE) (pp. 1-8). doi:10.1109/LaTiCE.2014.9DOI: 10.1109/LaTiCE.2014.9
Social product development: Introduction, overview, and current status (Chapter)
Peterson, A., & Schaefer, D. (2014). Social product development: Introduction, overview, and current status. In Product Development in the Socio-sphere: Game Changing Paradigms for 21st Century Breakthrough Product Development and Innovation (Vol. 9783319074047, pp. 1-33). doi:10.1007/978-3-319-07404-7_1DOI: 10.1007/978-3-319-07404-7_1
Cloud-Based Manufacturing: Old Wine in New Bottles? (Journal article)
Wu, D., Rosen, D. W., Wang, L., & Schaefer, D. (2014). Cloud-Based Manufacturing: Old Wine in New Bottles?. VARIETY MANAGEMENT IN MANUFACTURING: PROCEEDINGS OF THE 47TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS, 17, 94-99. doi:10.1016/j.procir.2014.01.035DOI: 10.1016/j.procir.2014.01.035
Social Product Development: Introduction, Overview, and Current Status (Chapter)
Peterson, A., & Schaefer, D. (2014). Social Product Development: Introduction, Overview, and Current Status. In Product Development in the Socio-sphere (pp. 1-33). Springer International Publishing. doi:10.1007/978-3-319-07404-7_1DOI: 10.1007/978-3-319-07404-7_1
2013
CLOUD-BASED DESIGN AND MANUFACTURING SYSTEMS: A SOCIAL NETWORK ANALYSIS (Conference Paper)
Wu, D., Schaefer, D., & Rosen, D. W. (2013). CLOUD-BASED DESIGN AND MANUFACTURING SYSTEMS: A SOCIAL NETWORK ANALYSIS. In DESIGN FOR HARMONIES, VOL 7: HUMAN BEHAVIOUR IN DESIGN. Retrieved from https://www.webofscience.com/
Enhancing the Product Realization Process With Cloud-Based Design and Manufacturing Systems (Journal article)
Wu, D., Thames, J. L., Rosen, D. W., & Schaefer, D. (2013). Enhancing the Product Realization Process With Cloud-Based Design and Manufacturing Systems. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 13(4). doi:10.1115/1.4025257DOI: 10.1115/1.4025257
Cloud manufacturing: Strategic vision and state-of-the-art (Journal article)
Wu, D., Greer, M. J., Rosen, D. W., & Schaefer, D. (2013). Cloud manufacturing: Strategic vision and state-of-the-art. JOURNAL OF MANUFACTURING SYSTEMS, 32(4), 564-579. doi:10.1016/j.jmsy.2013.04.008DOI: 10.1016/j.jmsy.2013.04.008
A Pedagogical Model to Educate Tomorrow's Engineers through a Cloud-based Design and Manufacturing Infrastructure - Motivation, Infrastructure, Pedagogy, and Applications (Conference Paper)
Patel, S., Schaefer, D., & Schrage, D. P. (2013). A Pedagogical Model to Educate Tomorrow's Engineers through a Cloud-based Design and Manufacturing Infrastructure - Motivation, Infrastructure, Pedagogy, and Applications. In 2013 ASEE ANNUAL CONFERENCE. Retrieved from https://www.webofscience.com/
Incorporating Social Product Development in Distributed Collaborative Design Education (Conference Paper)
Wu, D., Morlock, M., Pande, P., Rosen, D. W., & Schaefer, D. (2013). Incorporating Social Product Development in Distributed Collaborative Design Education. In Volume 1: 15th International Conference on Advanced Vehicle Technologies; 10th International Conference on Design Education; 7th International Conference on Micro- and Nanosystems. American Society of Mechanical Engineers. doi:10.1115/detc2013-13093DOI: 10.1115/detc2013-13093
Schaefer, D. (2013). Fostering a Culture of Professional Faculty Development and Recognition of Engineering & Engineering Technology Educators. In 2013 ASEE INTERNATIONAL FORUM. Retrieved from https://www.webofscience.com/
CLOUD MANUFACTURING: DRIVERS, CURRENT STATUS, AND FUTURE TRENDS (Conference Paper)
Wu, D., Greer, M. J., Rosen, D. W., & Schaefer, D. (2013). CLOUD MANUFACTURING: DRIVERS, CURRENT STATUS, AND FUTURE TRENDS. In PROCEEDINGS OF THE ASME 8TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2013, VOL 2. Retrieved from https://www.webofscience.com/
Personalized Engineering Education for the 21st Century - A Competency-based Approach (Chapter)
Mistree, F., Panchal, J. H., Schaefer, D., Allen, J. K., Haroon, S., & Siddique, Z. (2013). Personalized Engineering Education for the 21st Century - A Competency-based Approach. In Curriculum Models for the 21st Century: Using Learning Technologies in Higher Education (pp. 91-111). Springer.
2012
A proposed teaching and learning curriculum for COMPLEETE based on current national trends (Conference Paper)
Utschig, T. T., Schaefer, D., & Visco, D. P. (2012). A proposed teaching and learning curriculum for COMPLEETE based on current national trends. In 2012 Frontiers in Education Conference Proceedings. IEEE. doi:10.1109/fie.2012.6462359DOI: 10.1109/fie.2012.6462359
Combining Mathematical Programming and SysML for Automated Component Sizing of Hydraulic Systems (Journal article)
Shah, A. A., Paredis, C. J. J., Burkhart, R., & Schaefer, D. (2012). Combining Mathematical Programming and SysML for Automated Component Sizing of Hydraulic Systems. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 12(4). doi:10.1115/1.4007764DOI: 10.1115/1.4007764
A Semantic Association Hardware Acceleration System for Integrated Product Data Management (Journal article)
Thames, J. L., Eck, O., & Schaefer, D. (2012). A Semantic Association Hardware Acceleration System for Integrated Product Data Management. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 12(3). doi:10.1115/1.4007405DOI: 10.1115/1.4007405
Distributed Collaborative Design and Manufacture in the Cloud - Motivation, Infrastructure, and Education (Conference Paper)
Schaefer, D., Thames, J., Wellman, R., Wu, D., Yim, S., & Rosen, D. (2012, June 10). Distributed Collaborative Design and Manufacture in the Cloud - Motivation, Infrastructure, and Education. In 2012 ASEE Annual Conference & Exposition Proceedings. ASEE Conferences. doi:10.18260/1-2--21230DOI: 10.18260/1-2--21230
Competencies For Innovating In The 21st Century (Conference Paper)
Siddique, Z., Panchal, J., Schaefer, D., Haroon, S., Aliens, J. K., & Mistrees, F. (2012). COMPETENCIES FOR INNOVATING IN THE 21ST CENTURY. In PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 7 (pp. 185-196). Retrieved from https://www.webofscience.com/DOI: 10.1115/DETC2012-71170
TOWARDS A CLOUD-BASED DESIGN AND MANUFACTURING PARADIGM: LOOKING BACKWARD, LOOKING FORWARD (Conference Paper)
Wu, D., Thames, J. L., Rosen, D. W., & Schaefer, D. (2012). TOWARDS A CLOUD-BASED DESIGN AND MANUFACTURING PARADIGM: LOOKING BACKWARD, LOOKING FORWARD. In PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE 2012, VOL 2, PTS A AND B (pp. 315-+). Retrieved from https://www.webofscience.com/
Educating Engineers for the Near Tomorrow (Journal article)
Schaefer, D., Panchal, J. H., Thames, J. L., Haroon, S., & Mistree, F. (2012). Educating Engineers for the Near Tomorrow. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION, 28(2), 381-396. Retrieved from https://www.webofscience.com/
AC 2012-3017: DISTRIBUTED COLLABORATIVE DESIGN AND MANUFACTURE IN THE CLOUD - MOTIVATION, INFRASTRUCTURE, AND EDUCATION (Conference Paper)
Schaefer, D., Thames, J. L., Wellman, R. D. J., Wu, D., Yim, S., & Rosen, D. W. (2012). AC 2012-3017: DISTRIBUTED COLLABORATIVE DESIGN AND MANUFACTURE IN THE CLOUD - MOTIVATION, INFRASTRUCTURE, AND EDUCATION. In 2012 ASEE ANNUAL CONFERENCE. Retrieved from https://www.webofscience.com/
Distributed collaborative design and manufacture in the cloud-motivation, infrastructure, and education (Journal article)
Schaefer, D., Lane Thames, J., Wellman, R. D., Wu, D., & Rosen, D. W. (2012). Distributed collaborative design and manufacture in the cloud-motivation, infrastructure, and education. Computers in Education Journal, 22(4), 1-16.
Distributed collaborative design and manufacture in the cloud-motivation, infrastructure, and education (Conference Paper)
Schaefer, D., Thames, J. L., Wellman, R. D., Wu, D., Yim, S., & Rosen, D. W. (2012). Distributed collaborative design and manufacture in the cloud-motivation, infrastructure, and education. In ASEE Annual Conference and Exposition, Conference Proceedings.
GT MENTOR: A high school education program in systems engineering and additive manufacturing (Conference Paper)
Rosen, D. W., Schaefer, D., & Schrage, D. (2012). GT MENTOR: A high school education program in systems engineering and additive manufacturing. In 23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012 (pp. 62-80).
Industrial Game Changers for the Socio-sphere (Other)
Schaefer, D. (2012). Industrial Game Changers for the Socio-sphere. (Vol. 1/2012, pp. 41). [Control Design].
Mass-Customization: From Personalized Products to Personalized Engineering Education (Chapter)
Mistree, F., H., J., & Schaefer, D. (n.d.). Mass-Customization: From Personalized Products to Personalized Engineering Education. In Pathways to Supply Chain Excellence. InTech. doi:10.5772/29154DOI: 10.5772/29154
2011
Architectures and Design Methodologies for Scalable and Sustainable Remote Laboratory Infrastructures (Chapter)
Thames, J. L., Abler, R., Hyder, A., Wellman, R., & Schaefer, D. (2012). Architectures and Design Methodologies for Scalable and Sustainable Remote Laboratory Infrastructures. In Internet Accessible Remote Laboratories (pp. 254-275). IGI Global. doi:10.4018/978-1-61350-186-3.ch013DOI: 10.4018/978-1-61350-186-3.ch013
VIEW - A virtual interactive web-based learning environment for engineering (Journal article)
Goeser, P. T., Johnson, W. M., Hamza-Lup, F. G., & Schaefer, D. (2011). VIEW - A virtual interactive web-based learning environment for engineering. Advances in Engineering Education, 2(3).
DESIGN EDUCATION FOR THE WORLD OF NEAR TOMORROW: EMPOWERING STUDENTS TO LEARN HOW TO LEARN (Conference Paper)
Schaefer, D., Panchal, J., Haroon, S., & Mistree, F. (2011). DESIGN EDUCATION FOR THE WORLD OF NEAR TOMORROW: EMPOWERING STUDENTS TO LEARN HOW TO LEARN. In 2011 ASEE ANNUAL CONFERENCE & EXPOSITION. Retrieved from https://www.webofscience.com/
A semantic file system for integrated product data management (Journal article)
Eck, O., & Schaefer, D. (2011). A semantic file system for integrated product data management. ADVANCED ENGINEERING INFORMATICS, 25(2), 177-184. doi:10.1016/j.aei.2010.08.005DOI: 10.1016/j.aei.2010.08.005
Editorial for the special issue of information mining and retrieval in design (Journal article)
Liu, Y., McMahon, C., Ramani, K., & Schaefer, D. (2011). Editorial for the special issue of information mining and retrieval in design. ADVANCED ENGINEERING INFORMATICS, 25(2), 117-118. doi:10.1016/j.aei.2011.03.003DOI: 10.1016/j.aei.2011.03.003
Parametric Optimization of Artificial Neural Networks for Signal Approximation Applications (Conference Paper)
Thames, J. L., Abler, R., & Schaefer, D. (2011). Parametric Optimization of Artificial Neural Networks for Signal Approximation Applications. In PROCEEDINGS OF THE 49TH ANNUAL ASSOCIATION FOR COMPUTING MACHINERY SOUTHEAST CONFERENCE (ACMSE '11) (pp. 209-215). Retrieved from https://www.webofscience.com/
Information requirements analysis for holonic manufacturing systems in a virtual environment (Journal article)
Manesh, H. F., Schaefer, D., & Hashemipour, M. (2011). Information requirements analysis for holonic manufacturing systems in a virtual environment. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 53(1-4), 385-398. doi:10.1007/s00170-010-2822-0DOI: 10.1007/s00170-010-2822-0
Design education for the world of near tomorrow: Empowering students to learn how to learn (Conference Paper)
Schaefer, D., Panchal, J., Haroon, S., & Mistree, F. (2011). Design education for the world of near tomorrow: Empowering students to learn how to learn. In ASEE Annual Conference and Exposition, Conference Proceedings.
Innovative Design Education in a Global Distance Learning Setting (Conference Paper)
Schaefer, D., Thames, J. L., Panchal, J. H., Haroon, S., & Mistree, F. (2011). Innovative Design Education in a Global Distance Learning Setting. In Mudd Design Workshop VIII. Harvey Mudd College, Claremont, CA, USA.
Take E-CAD to the Cloud? (Other)
Schaefer, D. (2011). Take E-CAD to the Cloud?. (Vol. 11/2011, pp. 44-45). [Control Design].
2010
Multi-view Modeling to Support Embedded Systems Engineering in SysML (Journal article)
Shah, A. A., Kerzhner, A. A., Schaefer, D., & Paredis, C. J. J. (2010). Multi-view Modeling to Support Embedded Systems Engineering in SysML. GRAPH TRANSFORMATIONS AND MODEL-DRIVEN ENGINEERING, 5765, 580-601. Retrieved from https://www.webofscience.com/
A rapid prototyping experiment for undergraduate laboratory courses (Journal article)
Choi, S. K., Hagan, C., Krohe, J., & Schaefer, D. (2010). A rapid prototyping experiment for undergraduate laboratory courses. Computers in Education Journal, 20(4), 82-90.
Hybrid Association Mining and Refinement for Affective Mapping in Emotional Design (Journal article)
Zhou, F., Jiao, J. R., Schaefer, D., & Chen, S. (2010). Hybrid Association Mining and Refinement for Affective Mapping in Emotional Design. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 10(3). doi:10.1115/1.3482063DOI: 10.1115/1.3482063
A Virtual Factory Approach For Design And Implementation Of Agile Manufacturing Systems (Conference Paper)
Farahani Manesh, H., & Schaefer, D. (2010, June 20). A Virtual Factory Approach For Design And Implementation Of Agile Manufacturing Systems. In 2010 Annual Conference & Exposition Proceedings. ASEE Conferences. doi:10.18260/1-2--15644DOI: 10.18260/1-2--15644
Preparing For Participation In Speed: An Asee Initiative For A Nationally Recognized Development Program For Engineering Educators (Conference Paper)
Visco, D., Schaefer, D., Utschig, T., Mohsen, J. P., Fortenberry, N., Prince, M., & Finelli, C. (2010, June 20). Preparing For Participation In Speed: An Asee Initiative For A Nationally Recognized Development Program For Engineering Educators. In 2010 Annual Conference & Exposition Proceedings. ASEE Conferences. doi:10.18260/1-2--16805DOI: 10.18260/1-2--16805
Remotely controlled laboratory experiments: Creation and examples (Conference Paper)
Hyder, A., Choi, S. K., & Schaefer, D. (2010). Remotely controlled laboratory experiments: Creation and examples. In 2010 IEEE Systems and Information Engineering Design Symposium. IEEE. doi:10.1109/sieds.2010.5469676DOI: 10.1109/sieds.2010.5469676
6TH SYMPOSIUM ON INTERNATIONAL DESIGN AND DESIGN EDUCATION (DEC) (Conference Paper)
Jones, P., & Schaefer, D. (2010). 6TH SYMPOSIUM ON INTERNATIONAL DESIGN AND DESIGN EDUCATION (DEC). In PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 8, PTS A AND B (pp. 385). Retrieved from https://www.webofscience.com/
A virtual factory approach for design and implementation of agile manufacturing systems (Conference Paper)
Manesh, H. F., & Schaefer, D. (2010). A virtual factory approach for design and implementation of agile manufacturing systems. In ASEE Annual Conference and Exposition, Conference Proceedings.
COMBINING MATHEMATICAL PROGRAMMING AND SYSML FOR AUTOMATED COMPONENT SIZING OF HYDRAULIC SYSTEMS (Conference Paper)
Shah, A. A., Paredis, C. J. J., Burkhart, R., & Schaefer, D. (2010). COMBINING MATHEMATICAL PROGRAMMING AND SYSML FOR AUTOMATED COMPONENT SIZING OF HYDRAULIC SYSTEMS. In PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, DETC 2010, VOL 3, A AND B (pp. 1231-+). Retrieved from https://www.webofscience.com/
Enabling Multi-View Modeling with SysML Profiles and Model Transformations (Conference Paper)
Shah, A., Schaefer, D., & Paredis, C. (2010). Enabling Multi-View Modeling with SysML Profiles and Model Transformations. In Proceedings of the International Conference on Product Lifecycle Management PLM 2009 Vol. 11 (pp. 527-538). Inderscience.
Enterprise Information Systems for Business Integration in SMEs (Journal article)
Cruz-Cunha, M. M. (Ed.) (2010). Enterprise Information Systems for Business Integration in SMEs. doi:10.4018/978-1-60566-892-5DOI: 10.4018/978-1-60566-892-5
Preparing for participation in SPEED: An ASEE initiative for a nationally recognized development program for engineering Educators (Conference Paper)
Visco, D., Schaefer, D., Utschig, T., Mohsen, J. P., Fortenberry, N., Prince, M., & Finelli, C. (2010). Preparing for participation in SPEED: An ASEE initiative for a nationally recognized development program for engineering Educators. In ASEE Annual Conference and Exposition, Conference Proceedings.
SPEED - An ASEE Initiative for a Nationally Recognized Development Program for Engineering Educators (Conference Paper)
Schaefer, D., Visco, D., Utschig, T. T., Mohsen, J. P., Fortenberry, N., Prince, M., & Finelli, C. (2010). SPEED - An ASEE Initiative for a Nationally Recognized Development Program for Engineering Educators. In 2010 ASEE-SE Annual Conference. Blacksburg, VA, USA.
Virtual Learning Environments for Manufacturing (Chapter)
Manesh, H., & Schaefer, D. (2010). Virtual Learning Environments for Manufacturing. In Handbook of Research on Virtual Environments for Manufacturing (pp. 89-109). IGI Publishing.
Manesh, H., & Schaefer, D. (2010). Virtual Learning Environments for Manufacturing Education and Training. ASEE Computers in Education Journal (CIE), 1(1), 77-89.
2009
A Framework for Integrated Design of Mechatronic Systems (Chapter)
Chen, K., Bankston, J., Panchal, J. H., & Schaefer, D. (n.d.). A Framework for Integrated Design of Mechatronic Systems. In Collaborative Design and Planning for Digital Manufacturing (pp. 37-70). Springer London. doi:10.1007/978-1-84882-287-0_2DOI: 10.1007/978-1-84882-287-0_2
ROUGH SET BASED RULE MINING FOR AFFECTIVE DESIGN (Conference Paper)
Zhou, F., Jiao, J. R., Schaefer, D., & Chen, S. (2009). ROUGH SET BASED RULE MINING FOR AFFECTIVE DESIGN. In ICED 09 - THE 17TH INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, VOL 9: HUMAN BEHAVIOR IN DESIGN (pp. 245-+). Retrieved from https://www.webofscience.com/
Fostering Collaborative Learning and Mass-Customization of Education in a Graduate Engineering Design Course (Journal article)
Rippel, M., Schaefer, D., Mistree, F., & Panchal, J. H. (2009). Fostering Collaborative Learning and Mass-Customization of Education in a Graduate Engineering Design Course. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION, 25(4), 729-744. Retrieved from https://www.webofscience.com/
A Framework For Developing A Cohesive Set Of Remote Laboratories For Distributed Distance Learning Settings (Conference Paper)
Hyder, A., Post, B., & Schaefer, D. (2009, June 14). A Framework For Developing A Cohesive Set Of Remote Laboratories For Distributed Distance Learning Settings. In 2009 Annual Conference & Exposition Proceedings. ASEE Conferences. doi:10.18260/1-2--5360DOI: 10.18260/1-2--5360
Strengthening the performance of engineering and technology educators across the disciplines (speed) (Conference Paper)
Melsa, J. L., Mohsen, J. P., Schaefer, D., Utschig, T. T., & Visco, D. P. (2009). Strengthening the performance of engineering and technology educators across the disciplines (speed). In ASEE Annual Conference and Exposition, Conference Proceedings.
Incorporating Research into Undergraduate Design Courses: A Patent-Centered Approach (Journal article)
Schaefer, D., & Panchal, J. H. (2009). Incorporating Research into Undergraduate Design Courses: A Patent-Centered Approach. International Journal of Mechanical Engineering Education, 37(2), 98-110. doi:10.7227/ijmee.37.2.2DOI: 10.7227/ijmee.37.2.2
A framework for developing a cohesive set of remote laboratories for distributed distance learning settings (Conference Paper)
Hyder, A., Post, B., & Schaefer, D. (2009). A framework for developing a cohesive set of remote laboratories for distributed distance learning settings. In ASEE Annual Conference and Exposition, Conference Proceedings.
An Information Technology Infrastructure for Internet-Enabled Remote and Portable Laboratories (Conference Paper)
Thames, J. L., Hyder, A., Wellman, R., & Schaefer, D. (2009). An Information Technology Infrastructure for Internet-Enabled Remote and Portable Laboratories. In Volume 8: 14th Design for Manufacturing and the Life Cycle Conference; 6th Symposium on International Design and Design Education; 21st International Conference on Design Theory and Methodology, Parts A and B. ASMEDC. doi:10.1115/detc2009-87112DOI: 10.1115/detc2009-87112
Enabling Multi-View Modeling with SysML Profiles and Model Transformations (Conference Paper)
Shah, A., Schaefer, D., & Paredis, C. (2009). Enabling Multi-View Modeling with SysML Profiles and Model Transformations. In 6th International Conference on Product Lifecycle Management. Bath, UK.
Enhancing Mechanical Engineering Distance Education Through IT-Enabled Remote Laboratories (Conference Paper)
Hyder, A. C., Thames, J. L., & Schaefer, D. (2009). Enhancing Mechanical Engineering Distance Education Through IT-Enabled Remote Laboratories. In Volume 8: 14th Design for Manufacturing and the Life Cycle Conference; 6th Symposium on International Design and Design Education; 21st International Conference on Design Theory and Methodology, Parts A and B. ASMEDC. doi:10.1115/detc2009-87456DOI: 10.1115/detc2009-87456
Rippel, M., Panchal, J. H., Schaefer, D., & Mistree, F. (2009). Fostering Collaborative Learning and Educational Mass Customization in a Graduate Level Engineering Design Course. International Journal of Engineering Education, 25(4), 729-744.
Product Lifecycle Management: State-of-the-Art and Future Perspectives (Chapter)
Cheung, W. M., & Schaefer, D. (2009). Product Lifecycle Management: State-of-the-Art and Future Perspectives. In Enterprise Information Systems for Business Integration in SMEs: Technological, Organizational and Social Dimensions (pp. 37-55). IGI Publishing.
Strengthening the performance of engineering and technology educators across the disciplines (speed) (Conference Paper)
Melsa, J. L., Mohsen, J. P., Schaefer, D., Utschig, T. T., & Visco, D. P. (2009). Strengthening the performance of engineering and technology educators across the disciplines (speed). In ASEE Annual Conference and Exposition, Conference Proceedings.
Systematic Design Method for Large-Scale Manufacturing of Fabricated Polymers (Conference Paper)
Simpson, B. K., & Schaefer, D. (2009). Systematic Design Method for Large-Scale Manufacturing of Fabricated Polymers. In Volume 8: 14th Design for Manufacturing and the Life Cycle Conference; 6th Symposium on International Design and Design Education; 21st International Conference on Design Theory and Methodology, Parts A and B. ASMEDC. doi:10.1115/detc2009-86745DOI: 10.1115/detc2009-86745
2008
A Review Of Professional Qualification, Development, And Recognition Of Faculty Teaching In Higher Education Around The World (Conference Paper)
Schaefer, D., & Utschig, T. (2008, June 22). A Review Of Professional Qualification, Development, And Recognition Of Faculty Teaching In Higher Education Around The World. In 2008 Annual Conference & Exposition Proceedings. ASEE Conferences. doi:10.18260/1-2--3965DOI: 10.18260/1-2--3965
Opportunities and Challenges in Professional Education-related Faculty Development in the US (Conference Paper)
Utschig, T. T., & Schaefer, D. (2008). Opportunities and Challenges in Professional Education-related Faculty Development in the US. In FIE: 2008 IEEE FRONTIERS IN EDUCATION CONFERENCE, VOLS 1-3 (pp. 1688-1693). Retrieved from https://www.webofscience.com/
Software fosters mechatronic research (Other)
Schaefer, D. (2008). Software fosters mechatronic research. In Machine Design (Vol. 80, Iss. 19, pp. 87-88).
An investigation into using current information technologies to provide engineering education to Sub-Saharan Africa (Journal article)
Kirkland, N. T., Vitanov, V. L., & Schaefer, D. (2008). An investigation into using current information technologies to provide engineering education to Sub-Saharan Africa. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION, 24(2), 345-356. Retrieved from https://www.webofscience.com/
Strategic design of engineering education for the flat world (Journal article)
Schaefer, D., Panchal, J. H., Choi, S. -K., & Mistree, F. (2008). Strategic design of engineering education for the flat world. INTERNATIONAL JOURNAL OF ENGINEERING EDUCATION, 24(2), 274-282. Retrieved from https://www.webofscience.com/
A review of professional qualification, development, and recognition of faculty teaching in higher education around the world (Conference Paper)
Schaefer, D., & Utschig, T. (2008). A review of professional qualification, development, and recognition of faculty teaching in higher education around the world. In ASEE Annual Conference and Exposition, Conference Proceedings.
An Evo-Devo Framework for Computational Design Synthesis Based on a Regulation Process (Conference Paper)
Yang, S., Tseng, M. M., Schaefer, D., & Fathianathan, M. (2008). An Evo-Devo Framework for Computational Design Synthesis Based on a Regulation Process. In Volume 3: 28th Computers and Information in Engineering Conference, Parts A and B. ASMEDC. doi:10.1115/detc2008-49498DOI: 10.1115/detc2008-49498
An Integrated Approach to Design Mechatronic Systems: Cross-Disciplinary Constraint Modeling (Conference Paper)
Chen, K., Panchal, J., & Schaefer, D. (2008). An Integrated Approach to Design Mechatronic Systems: Cross-Disciplinary Constraint Modeling. In Volume 3: 28th Computers and Information in Engineering Conference, Parts A and B. ASMEDC. doi:10.1115/detc2008-49796DOI: 10.1115/detc2008-49796
Critical Elements for Future Programs Seeking to Establish Excellence in Engineering Education through Professional Qualification of Faculty Teaching in Higher Education (Conference Paper)
Utschig, T. T., & Schaefer, D. (2008). Critical Elements for Future Programs Seeking to Establish Excellence in Engineering Education through Professional Qualification of Faculty Teaching in Higher Education. In IACEE 11th World Conference on Continuing Engineering Education. Atlanta, GA, USA.
Integration of Distance Learning Technology into Traditional Engineering Physical Laboratory Exercises (Conference Paper)
Schaefer, D., Scott, D. W., Molina, G. J., Al-Kalaani, Y., Murphy, T., Johnson, W., & Thamburaj, P. (2008). Integration of Distance Learning Technology into Traditional Engineering Physical Laboratory Exercises. In 2008 ASEE-SE Annual Conference. Memphis, TN, USA.
2007
Advising the Advisor: Professional Development of Junior Faculty (Conference Paper)
Schaefer, D. (2007). Advising the Advisor: Professional Development of Junior Faculty. In 2007 ASEE-SE Annual Conference. Louisville, KY, USA.
An Investigation into Utilizing Current Information Technologies to Provide Engineering Education to Sub-Saharan Africa (Conference Paper)
Kirkland, N., Vitanov, V., & Schaefer, D. (2007). An Investigation into Utilizing Current Information Technologies to Provide Engineering Education to Sub-Saharan Africa. In MUDD Design Workship VI: Design and Engineering Education in a Flat World. Harvey Mudd College, Claremont, CA, USA.
E-CAD/CAE II: State of the Art (Other)
Schaefer, D. (2007). E-CAD/CAE II: State of the Art. (Vol. 11, No. 9, pp. 78). [Control Design].
E-CAD/CAE: A New Edge (Other)
Schaefer, D. (2007). E-CAD/CAE: A New Edge. (Vol. 11, No 8, pp. 90). [Control Design].
ECAD functionality suitable for web-based optimised automated product variant generation (Journal article)
Schaefer, D., & Baguley, P. (2007). ECAD functionality suitable for web-based optimised automated product variant generation. International Journal of Internet Manufacturing and Services, 1(1), 4. doi:10.1504/ijims.2007.014480DOI: 10.1504/ijims.2007.014480
Linking Research and Teaching: Two Design Courses Orchestrated Around a Rotary Diesel Engine Patent (Conference Paper)
Schaefer, D., & Panchal, J. H. (2007). Linking Research and Teaching: Two Design Courses Orchestrated Around a Rotary Diesel Engine Patent. In Volume 7: Engineering Education and Professional Development. ASMEDC. doi:10.1115/imece2007-41336DOI: 10.1115/imece2007-41336
MCAD-ECAD integration: Overview and future research perspectives (Conference Paper)
Chen, K., & Schaefer, D. (2007). MCAD-ECAD integration: Overview and future research perspectives. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) Vol. 3 (pp. 123-132). doi:10.1115/IMECE200741705DOI: 10.1115/IMECE200741705
Optimization of Complex Engineered Systems Under Risk and Uncertainty (Conference Paper)
Choi, S. -K., Fathianathan, M., & Schaefer, D. (2007). Optimization of Complex Engineered Systems Under Risk and Uncertainty. In Volume 5: 6th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Parts A, B, and C. ASMEDC. doi:10.1115/detc2007-34678DOI: 10.1115/detc2007-34678
Strategic Design of Engineering Education for the Flat World (Conference Paper)
Schaefer, D., Panchal, J. H., Choi, S. K., & Mistree, F. (2007). Strategic Design of Engineering Education for the Flat World. In MUDD Design Workshop VI: Design and Engineering in a Flat World. Harvey Mudd College, Claremont, CA, USA.
Towards achieving agility in web-based virtual enterprises: a decision-centric approach (Journal article)
Panchal, J. H., & Schaefer, D. (2007). Towards achieving agility in web-based virtual enterprises: a decision-centric approach. International Journal of Internet Manufacturing and Services, 1(1), 51. doi:10.1504/ijims.2007.014483DOI: 10.1504/ijims.2007.014483
2006
Schaefer, D. (2006). A Generic Approach to Automated Product Variant Design Technology. Journal of the Institution of Engineering Designers, 32(1), 30-33.
Schaefer, D. (2006). A Generic Approach to Variant Design in Electrical Engineering CAD. atp International - Automation Technology in Practice, 4(2), 46-50.
Schaefer, D. (2006). Electrical Engineering CAD: A New Generation of ECAD/ECAE Systems. Journal of the Institution of Engineering Designers, 32(5), 12-16.
2004
A New Method for Variant Design Technology in ECAD (Conference Paper)
Schaefer, D. (2004). A New Method for Variant Design Technology in ECAD. In ECAD/ECAE 2004 - 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering (pp. 46-49). Durham, UK.
Costing Issues Regarding Product Variant Design (Conference Paper)
Baguley, P., & Schaefer, D. (2004). Costing Issues Regarding Product Variant Design. In ECAD/ECAE 2004 - 1st International Conference on Electrical/Electromechanical Computer Aided Design & Engineering (pp. 41-45). Durham, UK.
ECAD/ECAE 2004 - Proceedings of the 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering (Book)
Schaefer, D., & Maropoulos, P. G. (Eds.) (2004). ECAD/ECAE 2004 - Proceedings of the 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering. Durham, UK: University of Durham.
Ensuring Electromagnetic Compliance in Printed Circuit Boards Through Design for Assembly Guidelines (Conference Paper)
Page, T., Baguley, P., & Schaefer, D. (2004). Ensuring Electromagnetic Compliance in Printed Circuit Boards Through Design for Assembly Guidelines. In ECAD/ECAE 2004 - 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering (pp. 106-110). Durham, UK.
Maintaining Electromagnetic Compatibility (EMC) Through Design for Fabrication and Assembly o Printed Circuit Boards (PCBs) (Conference Paper)
Page, T., Baguley, P., & Schaefer, D. (2004). Maintaining Electromagnetic Compatibility (EMC) Through Design for Fabrication and Assembly o Printed Circuit Boards (PCBs). In ECAD/ECAE 2004 - 1st International Conference on Electrical/Electromechanical Computer-Aided Design & Engineering (pp. 101-105). Durham, UK.
2003
Electrical Engineering Solutions - 3rd Generation CAE Systems (Journal article)
Schaefer, D., & Roller, D. (2003). Electrical Engineering Solutions - 3rd Generation CAE Systems. atp Automatisierungstechnische Praxis, 3, 40-44.
Elektrotechnik CAD: Band 1: CAE Systeme in Konstruktion und Fertigung (Book)
Schaefer, D., & Roller, D. (Eds.) (2003). Elektrotechnik CAD: Band 1: CAE Systeme in Konstruktion und Fertigung. Shaker.
Elektrotechnik CAD: Band 2: Variantentechnologie im ECAD/CAE-Bereich (Book)
Schaefer, D., & Roller, D. (Eds.) (2003). Elektrotechnik CAD: Band 2: Variantentechnologie im ECAD/CAE-Bereich. Shaker.
Grundlagen der ECAD Variantentechnologie (Conference Paper)
Schaefer, D. (2003). Grundlagen der ECAD Variantentechnologie. In ECAD/ECAE 2003 (pp. 1-30). Stuttgart, Germany.
Technologieansatz fuer ein ECAD Variantenmodul (Conference Paper)
Schaefer, D. (2003). Technologieansatz fuer ein ECAD Variantenmodul. In ECAD/ECAE 2003 (pp. 31-62). Stuttgart, Germany.
Variantentechnologie unter besonderer Beruecksichtigung von Elektrotechnik CAD (Thesis / Dissertation)
Schaefer, D. (2003). Variantentechnologie unter besonderer Beruecksichtigung von Elektrotechnik CAD. (University of Stuttgart, Germany).
Variantentechnologie unter besonderer Berücksichtigung von Elektrotechnik-CAD (Book)
Schaefer, D. (2003). Variantentechnologie unter besonderer Berücksichtigung von Elektrotechnik-CAD. Shaker.
2002
Aktuelle Forschungs- und Endwicklungstrends im ECAD Umfeld (Teil 1) (Other)
Schaefer, D., Roller, D., Plessow, M., & Wrobel, G. (2002). Aktuelle Forschungs- und Endwicklungstrends im ECAD Umfeld (Teil 1). (Vol. 21, No 3, pp. 88-91). [CAD-CAM Report].
CAE Systeme der dritten Generation: Wahnheit oder Vision (Conference Paper)
Schaefer, D., Roller, D., & Boeck, D. (2002). CAE Systeme der dritten Generation: Wahnheit oder Vision. In ECAD/ECAE 2002 (pp. 1-21). Stuttgart, Germany.
Elektrotechnik CAD - CAE Systeme der dritten Generation (Book)
Roller, D., & Schaefer, D. (Eds.) (2002). Elektrotechnik CAD - CAE Systeme der dritten Generation. Shaker.
Representation and Conversion of Dimension Units in CAD Data Models (Chapter)
Roller, D., Eck, O., Rieg, B., & Schaefer, D. (2002). Representation and Conversion of Dimension Units in CAD Data Models. In From Knowledge Intensive CAD to Knowledge Intensive Engineering (pp. 91-102). Kluwer Academic Publishers.
Schaltschrank Engineering: Forschungs- und Entwicklungsaktivitaeten (Teil 2) (Other)
Schaefer, D., Roller, D., Plessow, M., & Wrobel, G. (2002). Schaltschrank Engineering: Forschungs- und Entwicklungsaktivitaeten (Teil 2). (Vol. 21, No 4, pp. 44-46). [CAD-CAM Report].
2001
Anforderungen an Software fuer den globalen Engineering Prozess (Other)
Schaefer, D., & Roller, D. (2001). Anforderungen an Software fuer den globalen Engineering Prozess. (Vol. No 5, pp. 14-18). [etz Elektrotechnik und Automation 2001].
Die Prozesskette des Schaltschrankbaus (Conference Paper)
Holeczek, A., Schaefer, D., & Roller, D. (2001). Die Prozesskette des Schaltschrankbaus. In ECAD/ECAE 2001 (pp. 37-51). Stuttgart, Germany.
E-Learning, Mind Mapping, High Speed Reading - Lernen im dritten Jahrtausend (Conference Paper)
Schaefer, D., & Roller, D. (2001). E-Learning, Mind Mapping, High Speed Reading - Lernen im dritten Jahrtausend. In Software-Entwicklung fuer Internet und Intranet (pp. 139-150). TAE, Ostfildern, Germany.
Elektrotechnik CAD - Neue Technologien, Anwendungen, Systementwicklung, Zukünftige Trends (Book)
Schaefer, D., & Roller, D. (Eds.) (2001). Elektrotechnik CAD - Neue Technologien, Anwendungen, Systementwicklung, Zukünftige Trends. Shaker.
Schaltschrank-Engineering als durchgaengiger Prozess (Other)
Schaefer, D., Roller, D., & Plessow, M. (2001). Schaltschrank-Engineering als durchgaengiger Prozess. (Vol. 20, No 4, pp. 66-69). [CAD-CAM Report].
Werkzeuge fuer die rechnergestuetzte Entwicklung von Schaltanlagen und Schaltschraenken (Conference Paper)
Mack, J., Schaefer, D., & Roller, D. (2001). Werkzeuge fuer die rechnergestuetzte Entwicklung von Schaltanlagen und Schaltschraenken. In ECAD/ECAE 2001 (pp. 151-163). Stuttgart, Germany.
Workshop Elektrotechnik CAD: GI-Arbeitskreis E/M-CAD (Other)
Schaefer, D., & Plessow, M. (2001). Workshop Elektrotechnik CAD: GI-Arbeitskreis E/M-CAD. (Vol. 96, No 10, pp. 520). [ZWF Zeitschrift fuer wirtschaftlichen Fabrikbetrieb].
XML - Grundlagen und Anwendungen des neuen Internet Standards (Other)
Schaefer, D., & Roller, D. (2001). XML - Grundlagen und Anwendungen des neuen Internet Standards. (Vol. 20, No 2, pp. 28-33). [CAD-CAM Report].
2000
An approach to computer-aided quality control based on 3D coordinate metrology (Journal article)
Wolf, K., Roller, D., & Schäfer, D. (2000). An approach to computer-aided quality control based on 3D coordinate metrology. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 107(1-3), 96-110. doi:10.1016/S0924-0136(00)00668-3DOI: 10.1016/S0924-0136(00)00668-3
Advanced CAD/CAM Technologies Assessed from a User's Point of View (Conference Paper)
Schaefer, D., & Roller, D. (2000). Advanced CAD/CAM Technologies Assessed from a User's Point of View. In ISATA 2000 (pp. 45-59). Dublin, Ireland.
Anforderungen an Software fuer den globalen Engineering Prozess (Conference Paper)
Roller, D., & Schaefer, D. (2000). Anforderungen an Software fuer den globalen Engineering Prozess. In IT & Automation 2000 (pp. 221-230). Berlin, Germany.
Bericht zum Seminar ueber Elektro-CAD (Report)
Schaefer, D., & Roller, D. (2000). Bericht zum Seminar ueber Elektro-CAD (TR 2000/07). University of Stuttgart, Germany.
CAD Tools and Algorithms for Product Design (Book)
Brunet, P., Hoffmann, C. M., & Roller, D. (Eds.) (2000). CAD Tools and Algorithms for Product Design. Springer Berlin Heidelberg. doi:10.1007/978-3-662-04123-9DOI: 10.1007/978-3-662-04123-9
Knowledge-based Representation of Dimension Units in CAD Data Models (Conference Paper)
Roller, D., Eck, O., Rieg, B., & Schaefer, D. (2000). Knowledge-based Representation of Dimension Units in CAD Data Models. In 4th IFIP Working Group 5.2 Workshop on Knowledge Intensive CAD: KIC-4 (pp. 45-59). Parma, Italy.
Variational design in electrical engineering -: An extension of parametric modeling (Chapter)
Roller, D., & Schäfer, D. (2000). Variational design in electrical engineering -: An extension of parametric modeling. In Unknown Book (pp. 233-250). Retrieved from https://www.webofscience.com/
1999
A Shared Knowledge Base for Interdisciplinary Parametric Product Data Models in CAD (Conference Paper)
Schaefer, D., Eck, O., & Roller, D. (1999). A Shared Knowledge Base for Interdisciplinary Parametric Product Data Models in CAD. In ICED 1999 (pp. 1593-1598). Munich, Germany.
A System Architecture for Modules Supporting Variational Design in Electrical Engineering (Conference Paper)
Dettlaff, B., Roller, D., & Schaefer, D. (1999). A System Architecture for Modules Supporting Variational Design in Electrical Engineering. In ISATA 1999 (pp. 53-61). Vienna, Austria.
Advanced CAQ: Comparing Manufactured Products with Underlying CAD Models (Conference Paper)
Schaefer, D., Roller, D., & Wolf, K. (1999). Advanced CAQ: Comparing Manufactured Products with Underlying CAD Models. In CAPE '99 (pp. 273-280). Durham, UK.
Der CAD/CAM Markt und seine Trends aus Anwendersicht (Teil 1) (Other)
Schaefer, D., & Roller, D. (1999). Der CAD/CAM Markt und seine Trends aus Anwendersicht (Teil 1). (Vol. 18, No 9, pp. 22-29). [CAD-CAM Report].
Der CAD/CAM Markt und seine Trends aus Anwendersicht (Teil 2) (Other)
Schaefer, D., & Roller, D. (1999). Der CAD/CAM Markt und seine Trends aus Anwendersicht (Teil 2). (Vol. 18, No 10, pp. 116-120). [CAD-CAM Report].
Die Methode bestimmt das Ergebnis: Kosten- und Zeitreduzierung durch Varianten- und Komponententechnik (Other)
Schaefer, D., & Roller, D. (1999). Die Methode bestimmt das Ergebnis: Kosten- und Zeitreduzierung durch Varianten- und Komponententechnik. (Vol. 30, No 1-2, pp. 52-53). [Der Konstrukteur].
Elektro-CAD am Wendepunkt - Stand der Technik im ECAD (Other)
Schaefer, D., & Roller, D. (1999). Elektro-CAD am Wendepunkt - Stand der Technik im ECAD. (Vol. No 5, pp. 36-38). [CAD World].
Requirement Analysis for ECAD Variant Modules (Conference Paper)
Schaefer, D., Eck, O., & Roller, D. (1999). Requirement Analysis for ECAD Variant Modules. In ISATA 1999 (pp. 43-51). Vienna, Austria.
Software- und Systementwicklung für technische Anwendungen (Chapter)
Schaefer, D., & Roller, D. (1999). Software- und Systementwicklung für technische Anwendungen. In Computer Graphik Markt 1999/2000 (pp. II-2-II-9). Dressler.
Windowsgestuetzte Software-Entwicklung im Ingenieurbereich: Stand der Technik - Erfahrungen - Trends (Conference Paper)
Roller, D., & Schaefer, D. (1999). Windowsgestuetzte Software-Entwicklung im Ingenieurbereich: Stand der Technik - Erfahrungen - Trends. In Software-Entwicklung: Methoden, Werkzeuge, Erfahrungen '99 (pp. 41-62). TAE, Ostfildern, Germany.
1998
Parametrische Modellierung: Situationsanalyse und Trends (Other)
Roller, D., & Schaefer, D. (1998). Parametrische Modellierung: Situationsanalyse und Trends. (Vol. 17, No 5, pp. 96-104). [CAD/CAM].
Parametrische Produkt- und Prozessmodellierung (Other)
Schaefer, D., & Roller, D. (1998). Parametrische Produkt- und Prozessmodellierung. (Vol. 17, No 10, pp. 74-84). [CAD-CAM Report].
Variantentechnologie in Elektrokonstruktion und Anlagenprojektierung (Other)
Roller, D., Schaefer, D., & Richert, U. W. (1998). Variantentechnologie in Elektrokonstruktion und Anlagenprojektierung. (Vol. 17, No 9, pp. 90-97). [CAD-CAM Report].
1996
Interpolation mittels lokaler Interpolierender und Blendetechniken (Thesis / Dissertation)
Schaefer, D. (1996). Interpolation mittels lokaler Interpolierender und Blendetechniken. (University of Duisburg, Germany).